File Detail parts/2466p07.dat

Download Download zip file View patterns/composites/shortcuts

Official File parts/2466p07.dat

Part Attributes: Base Part: 2466.dat

External Sites:

View on Rebrickable View on BrickLink View on BrickOwl

Panel 3 x 2 x 6 with Black Grille Pattern

File Header:

0 Panel  3 x  2 x  6 with Black Grille Pattern
0 Name: 2466p07.dat
0 Author: Rene Rechthaler [Blechtaler]
0 !LDRAW_ORG Part UPDATE 2025-07
0 !LICENSE Licensed under CC BY 4.0 : see CAreadme.txt

0 BFC CERTIFY CCW

0 !KEYWORDS Rebrickable 2466pr0001, Set 6850

0 !HISTORY 1999-12-31 [PTadmin] Official Update 1999-06
0 !HISTORY 2007-12-20 [PTadmin] Header formatted for Contributor Agreement
0 !HISTORY 2008-07-01 [PTadmin] Official Update 2008-01
0 !HISTORY 2014-11-21 [roland] Auto-corrected with libfix version of LDCad 1.4
0 !HISTORY 2014-12-28 [Philo] BFCed with Windz, removed pattern highlight lines
0 !HISTORY 2015-10-11 [PTadmin] Official Update 2015-01
0 !HISTORY 2025-01-20 [Blechtaler] Subfiled, original by Jonathan Wilson [jonwil]
0 !HISTORY 2025-07-27 [OrionP] Official Update 2025-07

Show contents

1 16 0 0 0 1 0 0 0 1 0 0 0 1 s\2466s01.dat
4 16 17 39 -50 20 34 -50 -20 34 -50 -17 39 -50
4 0 17 44.2 -50 17 39 -50 -17 39 -50 -17 44.2 -50
4 16 -17 49.2 -50 17 49.2 -50 17 44.2 -50 -17 44.2 -50
4 0 17 54.4 -50 17 49.2 -50 -17 49.2 -50 -17 54.4 -50
4 16 -17 59.4 -50 17 59.4 -50 17 54.4 -50 -17 54.4 -50
4 0 17 64.6 -50 17 59.4 -50 -17 59.4 -50 -17 64.6 -50
4 16 -17 69.6 -50 17 69.6 -50 17 64.6 -50 -17 64.6 -50
4 0 17 74.8 -50 17 69.6 -50 -17 69.6 -50 -17 74.8 -50
4 16 -17 79.8 -50 17 79.8 -50 17 74.8 -50 -17 74.8 -50
4 0 17 85 -50 17 79.8 -50 -17 79.8 -50 -17 85 -50
4 16 -20 90 -50 20 90 -50 17 85 -50 -17 85 -50
3 16 -17 39 -50 -20 34 -50 -17 44.2 -50
3 16 -17 44.2 -50 -20 34 -50 -17 49.2 -50
3 16 -17 49.2 -50 -20 34 -50 -17 54.4 -50
3 16 -17 54.4 -50 -20 34 -50 -17 59.4 -50
4 16 -17 59.4 -50 -20 34 -50 -20 90 -50 -17 64.6 -50
3 16 -17 64.6 -50 -20 90 -50 -17 69.6 -50
3 16 -17 69.6 -50 -20 90 -50 -17 74.8 -50
3 16 -17 74.8 -50 -20 90 -50 -17 79.8 -50
3 16 -17 79.8 -50 -20 90 -50 -17 85 -50
3 16 20 34 -50 17 39 -50 17 44.2 -50
3 16 20 34 -50 17 44.2 -50 17 49.2 -50
3 16 20 34 -50 17 49.2 -50 17 54.4 -50
3 16 20 34 -50 17 54.4 -50 17 59.4 -50
4 16 17 59.4 -50 17 64.6 -50 20 90 -50 20 34 -50
3 16 20 90 -50 17 64.6 -50 17 69.6 -50
3 16 20 90 -50 17 69.6 -50 17 74.8 -50
3 16 20 90 -50 17 74.8 -50 17 79.8 -50
3 16 20 90 -50 17 79.8 -50 17 85 -50

Status:

Official

Unofficial parents

Part Events:

Archived Part Events:

Rene Rechthaler [Blechtaler]

initially submitted the part.

2025-01-20 21:51:56

used subpart

Rene Rechthaler [Blechtaler]

made the following comment.

2025-01-20 21:57:23

also has the BL+RB links now (Keywords are required for patterned parts)

Chris Böhnke [KnightOfTarenta]

posted a vote of Hold.

2025-01-21 12:23:04

*the bars are too thin.

I think 6 x 34 LDU is the correct size (currently it's 4 x 34). Spacing inbetween should be 4 LDU (currently 7). This should result in a distance of 5 LDU (instead of 4) to the top and bottom edges.

Rene Rechthaler [Blechtaler]

made the following comment.

2025-01-21 16:37:16

as of now, i only fixed the t-junk and used the submodel, the print is the same...
you are right, the bars are too thin, but i would not go to 6/5 spacing, rather equal sizes (5.5 LDU or similar)

Rene Rechthaler [Blechtaler]

made the following comment.

2025-01-21 16:39:00

if you count the pixels in the peeron pic:
http://www.peeron.com/inv/parts/2466p07?img=8777
bars are about 12pixels, gaps are 11 (on average)

Chris Böhnke [KnightOfTarenta]

made the following comment.

2025-01-21 17:28:13

Agreed. Checked on a real part, both bars and gaps are about the same size (somewhere between 2 and 2,5 mm).

Rene Rechthaler [Blechtaler]

submitted a new version of the part.

2025-01-21 22:45:46

made the stripes bigger (5.6LDU now, symmetric from the old position, gaps are 5.4)

Chris Böhnke [KnightOfTarenta]

edited the part header.

2025-01-22 03:41:46

Header Edits

keywords:
Bricklink 2466p07, BrickOwl 852036, Rebrickable 2466pr0001, Set 6850
to
BrickOwl 852036, Bricklink 2466p07, Rebrickable 2466pr0001, Set 6850, Set 9355, Space, Dacta, Futuron, Bars, Stripes

Chris Böhnke [KnightOfTarenta]

posted a vote of Certify.

2025-01-22 03:41:54

Philippe Hurbain [Philo]

posted a vote of Hold.

2025-03-26 12:59:53

Looking at the photos, the space between facet angle and first black line should be wider, about 5.2ldu (currently 3.2ldu).

Rene Rechthaler [Blechtaler]

submitted a new version of the part.

2025-03-29 09:05:07

changed the gaps to 5 (bars are 5.2)

Chris Böhnke [KnightOfTarenta]