File Detail parts/71372k01.dat

Download Download zip file View patterns/composites/shortcuts

Official File parts/71372k01.dat

Part Attributes: Base Part: 71372-f1.dat

File Header:

0 ~Technic Tread Segment - Straight
0 Name: 71372k01.dat
0 Author: Marc Klein [marckl]
0 !LDRAW_ORG Part Flexible_Section UPDATE 2024-10
0 !LICENSE Licensed under CC BY 4.0 : see CAreadme.txt

0 BFC CERTIFY CCW

0 !HISTORY 2000-09-30 [PTadmin] Official Update 2000-02
0 !HISTORY 2007-07-18 [PTadmin] Header formatted for Contributor Agreement
0 !HISTORY 2008-07-01 [PTadmin] Official Update 2008-01
0 !HISTORY 2014-11-21 [roland] Auto-corrected with libfix version of LDCad 1.4
0 !HISTORY 2016-12-23 [MagFors] Made BFC, used primitives
0 !HISTORY 2024-11-06 [MagFors] Renumbered from 680
0 !HISTORY 2024-12-01 [OrionP] Official Update 2024-10

Show contents

1 16 0 29 17.5 -1.5 0 0 0 0 -2 0 7.5 0 box2-7.dat
4 16 -10 33 25 -10 31 25 -1.5 31 25 -4.67 33 25
4 16 10 31 25 10 33 25 4.67 33 25 1.5 31 25
4 16 -4.67 33 25 -1.5 31 25 1.5 31 25 4.67 33 25
4 16 4.67 33 25 3.67 36 25 -3.67 36 25 -4.67 33 25
1 16 0 29 -17.5 -1.5 0 0 0 0 -2 0 -7.5 0 box2-7.dat
4 16 -1.5 31 -25 -4.67 33 -25 4.67 33 -25 1.5 31 -25
4 16 -3.67 36 -25 3.67 36 -25 4.67 33 -25 -4.67 33 -25
4 16 1.5 31 -25 4.67 33 -25 10 33 -25 10 31 -25
4 16 -4.67 33 -25 -1.5 31 -25 -10 31 -25 -10 33 -25
1 16 0 23.5 1.31 1.5 0 0 0 0 -3.5 0 7.38 -1.31 box2-5.dat
4 16 1.5 31 -25 1.5 31 25 1.5 27 10 1.5 27 -10
3 16 1.5 31 25 1.5 27 25 1.5 27 10
3 16 1.5 31 -25 1.5 27 -10 1.5 27 -25
4 16 1.5 27 10 1.5 20 7.38 1.5 20 -7.38 1.5 27 -10
4 16 -1.5 27 10 -1.5 31 25 -1.5 31 -25 -1.5 27 -10
3 16 -1.5 31 -25 -1.5 27 -25 -1.5 27 -10
3 16 -1.5 27 25 -1.5 31 25 -1.5 27 10
4 16 -1.5 27 -10 -1.5 20 -7.38 -1.5 20 7.38 -1.5 27 10
4 16 -4.67 33 -25 -4.67 33 25 -3 38 -10 -3.67 36 -25
4 16 -4.67 33 25 -3.67 36 25 -3 38 10 -3 38 -10
4 16 4.67 33 25 4.67 33 -25 3 38 10 3.67 36 25
4 16 4.67 33 -25 3.67 36 -25 3 38 -10 3 38 10
1 16 0 38 0 0 0 -3 0 -1 0 -10 0 0 rect2p.dat
1 16 -7.335 33 0 0 0 2.665 0 -1 0 25 0 0 rect3.dat
1 16 7.335 33 0 0 0 -2.665 0 -1 0 -25 0 0 rect3.dat
1 16 -5.75 31 0 0 0 4.25 0 1 0 -25 0 0 rect3.dat
1 16 5.75 31 0 0 0 -4.25 0 1 0 25 0 0 rect3.dat
4 16 3.67 36 25 3 38 10 -3 38 10 -3.67 36 25
4 16 3.67 36 -25 -3.67 36 -25 -3 38 -10 3 38 -10
1 16 0 23.5 -8.69 -1.5 0 0 0 1 3.5 0 0 -1.31 rect3.dat
2 24 -4.67 33 25 -3.67 36 25
2 24 3.67 36 25 4.67 33 25
2 24 -3.67 36 25 3.67 36 25
2 24 -3.67 36 -25 -4.67 33 -25
2 24 4.67 33 -25 3.67 36 -25
2 24 3.67 36 -25 -3.67 36 -25
2 24 -3.67 36 -25 -3 38 -10
2 24 -3 38 10 -3.67 36 25
2 24 3.67 36 25 3 38 10
2 24 3 38 -10 3.67 36 -25
5 24 3 38 10 -3 38 10 -3 38 -10 3.67 36 25
5 24 -3 38 -10 3 38 -10 3 38 10 -3.67 36 -25

Status:

Official

Unofficial parents

Part Events:

Archived Part Events:

Roland Melkert [roland]

initially submitted the part.

2014-12-23 18:00:02

Steffen [Steffen]

posted a vote of Hold.

2015-01-06 22:40:00

type needs to be changed to subpart

Magnus Forsberg [MagFors]

submitted a new version of the part.

2016-12-25 21:00:01

Steffen [Steffen]

submitted a new version of the part.

2016-12-26 21:40:00

changed type to subpart

Magnus Forsberg [MagFors]

made the following comment.

2016-12-27 19:40:00

I don't mind the change, but I find it odd that we have two different ways of sorting these.
I can find ~15 different files with segments of parts in the Part-folder with parttype Part,
even though they are segments of a part (i.e. subpart). Most of them are official files.
Make a search in LDFind on "segment".

Steffen [Steffen]

made the following comment.

2016-12-27 20:05:00

that's an old story.

these "parts" are only in the "parts" folder so that MLCad users will find them easily for use with LSYNTH.

in fact, they are subparts and belong into parts\s

Magnus Forsberg [MagFors]

made the following comment.

2016-12-29 17:40:00

I think the question is rather; Will LSynth find them if they have parttype "subfile"?

Philippe Hurbain [Philo]

made the following comment.

2016-12-29 17:50:01

I am completely sure LSynth doesn't mind part type.

Philippe Hurbain [Philo]

posted a vote of Certify.

2016-12-29 17:55:00

Willy Tschager [Holly-Wood]

posted a vote of Hold.

2017-07-18 17:55:00

if this becoms a subpart it misses the "s\" in front.

Philippe Hurbain [Philo]

made the following comment.

2017-07-18 19:45:00

No, because it is placed in parts folder

Willy Tschager [Holly-Wood]

posted a vote of Hold.

2017-07-18 21:00:00

Then it's a part an should get Unofficial_Part

Philippe Hurbain [Philo]

made the following comment.

2017-07-19 06:40:00

Status of these parts have been already discussed a LOT... They are not a part since they are not complete - this make them technically a subpart. But they need to be found by users so they need to be placed in parts folder. If you have a better idea...?

Willy Tschager [Holly-Wood]

made the following comment.

2017-07-19 14:50:00

Very simple. Rename it to !LDRAW_ORG Unofficial_Part. I don't wanna see
Unofficial_Subparts showing up in the parts folder if we can avoid it.

Philippe Hurbain [Philo]

made the following comment.

2017-07-19 15:30:00

No problem for me. Ask Steffen!

Philippe Hurbain [Philo]

made the following comment.

2017-07-19 15:30:00

(FYI we made the opposite move one of two years ago !!!)

Steffen [Steffen]

made the following comment.

2017-07-20 10:10:00

No, tagging this as "part" instead of "subpart" attaches
wrong semantics to it.
It is already misplaced in the "parts" folder, and that only for a tool which otherwise won't find it.
We should not make things worse by tagging it wrongly additionally.
The exception here is to allow a "subpart" sit in the "parts" folder.
That's bad enough. But additionally "lying" about its type makes things worse, not better.

Instead, we should update LSYNTH...

The current status quo is to have these in the "parts" folder although they are subparts. This was the result of the same discussion some years ago...

Philippe Hurbain [Philo]

made the following comment.

2017-07-20 11:50:00

Lsynth is not the only culprit. An MLCad use might want to create a tread manually, but for that he must be able to find tread elements so they must reside in parts folder (and not be tilded). Fortunately these old tools don't care for part type...

Magnus Forsberg [MagFors]

posted a vote of Hold.

2018-11-03 14:40:01

Renumber to flexible section.

Magnus Forsberg [MagFors]

submitted a new version of the part.

2024-11-06 21:19:58

Magnus Forsberg [MagFors]

edited the part header.

2024-11-06 21:20:45

Header Edits

qual:
Flexible_Section
to
Flexible_Section
keywords:

to

Magnus Forsberg [MagFors]

renamed the part.

2024-11-06 21:25:52

"parts/680.dat" to "parts/71372k01.dat"

Philippe Hurbain [Philo]

edited the part header.

2024-11-07 08:23:09

Header Edits

history:
0 !HISTORY 2000-09-30 [PTadmin] Official Update 2000-02 0 !HISTORY 2007-07-18 [PTadmin] Header formatted for Contributor Agreement 0 !HISTORY 2008-07-01 [PTadmin] Official Update 2008-01 0 !HISTORY 2014-11-21 [roland] Auto-corrected with libfix version of LDCad 1.4 0 !HISTORY 2016-12-23 [MagFors] Made BFC, used primititves 0 !HISTORY 2024-11-06 [MagFors] Renumbered from 680
to
0 !HISTORY 2000-09-30 [PTadmin] Official Update 2000-02 0 !HISTORY 2007-07-18 [PTadmin] Header formatted for Contributor Agreement 0 !HISTORY 2008-07-01 [PTadmin] Official Update 2008-01 0 !HISTORY 2014-11-21 [roland] Auto-corrected with libfix version of LDCad 1.4 0 !HISTORY 2016-12-23 [MagFors] Made BFC, used primitives 0 !HISTORY 2024-11-06 [MagFors] Renumbered from 680
keywords:

to