Official File parts/6810.dat
Part Attributes:
File Header:
0 ~Scala Support Connector with Hole and Scala Stud
0 Name: 6810.dat
0 Author: Gerald Lasser [GeraldLasser]
0 !LDRAW_ORG Part UPDATE 2024-04
0 !LICENSE Licensed under CC BY 4.0 : see CAreadme.txt
0 BFC CERTIFY CCW
0 !HISTORY 2024-03-23 [OrionP] Updated ring primitives
0 !HISTORY 2024-05-28 [OrionP] Official Update 2024-04
Show contents
1 16 0 0 0 1 0 0 0 1 0 0 0 1 s\6809s01.dat
0 // Inside
1 16 0 9.5 0 7.5 0 0 0 1 0 0 0 7.5 4-4edge.dat
0 BFC INVERTNEXT
1 16 0 9.5 0 7.5 0 0 0 -3 0 0 0 7.5 4-4cyli.dat
1 16 0 9.5 0 1.5 0 0 0 -1 0 0 0 1.5 4-4ring5.dat
1 16 0 9.5 0 .5 0 0 0 -1 0 0 0 .5 4-4ring18.dat
1 16 0 9.5 0 9.5 0 0 0 -5.5 0 0 0 9.5 4-4cylo.dat
2 24 9.321946 9.5 .895416 9.143922 9.5 0
2 24 9.143922 9.5 0 9.321946 9.5 -.895416
0 BFC INVERTNEXT
1 16 0 3.25 0 .5 0 0 0 3.25 0 0 0 .5 4-4con15.dat
0 BFC INVERTNEXT
1 16 0 0 0 .5 0 0 0 3.25 0 0 0 .5 4-4con16.dat
4 16 -9.5 4 9.5 -9.5 4 -9.5 -13 4 -13 -13 4 13
4 16 9.5 4 9.5 -9.5 4 9.5 -13 4 13 13 4 13
4 16 -9.5 4 -9.5 9.5 4 -9.5 13 4 -13 -13 4 -13
1 16 0 4 0 9.5 0 0 0 -1 0 0 0 9.5 4-4ndis.dat
4 16 13 4 8.129 12.3235 4 7.6765 9.5 4 9.5 13 4 13
4 16 13 4 -13 9.5 4 -9.5 12.3235 4 -7.6765 13 4 -8.129
3 16 12.3235 4 7.6765 9.5 4 0 9.5 4 9.5
3 16 12.3235 4 -7.6765 9.5 4 -9.5 9.5 4 0
0 // Top
1 16 0 0 -20 5.757362 0 -5.757362 0 1 0 5.757362 0 5.757362 1-4chrd.dat
1 16 -20 0 0 5.757362 0 5.757362 0 1 0 -5.757362 0 5.757362 1-4chrd.dat
1 16 0 0 20 -5.757362 0 5.757362 0 1 0 -5.757362 0 -5.757362 1-4chrd.dat
4 16 -14.24264 0 -5.75736 -14.24264 0 5.75736 -16 0 16 -16 0 -16
4 16 -5.75736 0 14.24264 5.75736 0 14.24264 16 0 16 -16 0 16
4 16 14.24264 0 5.75736 16 0 6.932 16 0 16 5.75736 0 14.24264
3 16 -5.75736 0 14.24264 -16 0 16 -14.24264 0 5.75736
3 16 -14.24264 0 -5.75736 -16 0 -16 -5.75736 0 -14.24264
4 16 5.75736 0 -14.24264 -5.75736 0 -14.24264 -16 0 -16 16 0 -16
4 16 16 0 -16 16 0 -6.932 14.24264 0 -5.75736 5.75736 0 -14.24264
2 24 14.24264 0 5.75736 16 0 6.932
2 24 16 0 6.932 16 0 16
2 24 14.24264 0 -5.75736 16 0 -6.932
2 24 16 0 -6.932 16 0 -16
2 24 -16 0 -16 16 0 -16
0 // Scala Stud
1 16 -10 -4 -10 -4.24264 0 -4.24264 0 4 0 4.24264 0 -4.24264 2-4cylc.dat
1 16 10 -4 -10 -4.24264 0 4.24264 0 4 0 -4.24264 0 -4.24264 2-4cylo.dat
1 16 -10 -4 10 4.24264 0 -4.24264 0 4 0 4.24264 0 4.24264 2-4cylc.dat
1 16 10 -4 10 4.24264 0 4.24264 0 4 0 -4.24264 0 4.24264 2-4cylc.dat
1 16 -20 -4 0 5.757362 0 5.757362 0 1 0 -5.757362 0 5.757362 1-4tang.dat
0 BFC INVERTNEXT
1 16 -20 -4 0 5.757362 0 5.757362 0 4 0 -5.757362 0 5.757362 1-4cylo.dat
1 16 0 -4 -20 5.757362 0 -5.757362 0 1 0 5.757362 0 5.757362 1-4tang.dat
0 BFC INVERTNEXT
1 16 0 -4 -20 5.757362 0 -5.757362 0 4 0 5.757362 0 5.757362 1-4cylo.dat
1 16 0 -4 20 -5.757362 0 5.757362 0 1 0 -5.757362 0 -5.757362 1-4tang.dat
0 BFC INVERTNEXT
1 16 0 -4 20 -5.757362 0 5.757362 0 4 0 -5.757362 0 -5.757362 1-4cylo.dat
1 16 20 -4 0 -5.757362 0 -5.757362 0 1 0 5.757362 0 -5.757362 1-4tang.dat
0 BFC INVERTNEXT
1 16 20 -4 0 -5.757362 0 -5.757362 0 4 0 5.757362 0 -5.757362 1-4cyli.dat
1 16 20 -4 0 -5.757362 0 -5.757362 0 1 0 5.757362 0 -5.757362 1-4edge.dat
0 BFC INVERTNEXT
1 16 0 0 0 8.5 0 0 0 -4 0 0 0 8.5 4-4cyli.dat
1 16 0 -4 0 8.5 0 0 0 1 0 0 0 8.5 4-4edge.dat
1 16 0 -4 0 8.5 0 0 0 1 0 0 0 8.5 4-4ndis.dat
1 16 10 -4 -10 4.24264 0 4.24264 0 1 0 4.24264 0 -4.24264 2-4disc.dat
4 16 4.6122 -4 13.0975 8.5 -4 8.5 10 -4 10 5.7574 -4 14.2426
4 16 14.2426 -4 5.7574 10 -4 10 8.5 -4 8.5 13.0975 -4 4.6122
4 16 3.1159 -4 12.4774 1.6195 -4 11.8574 0 -4 8.5 8.5 -4 8.5
4 16 11.8574 -4 1.6195 12.4774 -4 3.1159 8.5 -4 8.5 8.5 -4 0
3 16 4.6122 -4 13.0975 3.1159 -4 12.4774 8.5 -4 8.5
3 16 13.0975 -4 4.6122 8.5 -4 8.5 12.4774 -4 3.1159
3 16 0 -4 11.8579 0 -4 8.5 1.6195 -4 11.8574
3 16 8.5 -4 0 11.8579 -4 0 11.8574 -4 1.6195
4 16 -13.0975 -4 4.6122 -8.5 -4 8.5 -10 -4 10 -14.2426 -4 5.7574
4 16 -5.7574 -4 14.2426 -10 -4 10 -8.5 -4 8.5 -4.6122 -4 13.0975
4 16 -12.4774 -4 3.1159 -11.8574 -4 1.6195 -8.5 -4 0 -8.5 -4 8.5
4 16 -1.6195 -4 11.8574 -3.1159 -4 12.4774 -8.5 -4 8.5 0 -4 8.5
3 16 -13.0975 -4 4.6122 -12.4774 -4 3.1159 -8.5 -4 8.5
3 16 -4.6122 -4 13.0975 -8.5 -4 8.5 -3.1159 -4 12.4774
3 16 -11.8579 -4 0 -8.5 -4 0 -11.8574 -4 1.6195
3 16 0 -4 8.5 0 -4 11.8579 -1.6195 -4 11.8574
4 16 -4.6122 -4 -13.0975 -8.5 -4 -8.5 -10 -4 -10 -5.7574 -4 -14.2426
4 16 -14.2426 -4 -5.7574 -10 -4 -10 -8.5 -4 -8.5 -13.0975 -4 -4.6122
4 16 -3.1159 -4 -12.4774 -1.6195 -4 -11.8574 0 -4 -8.5 -8.5 -4 -8.5
4 16 -11.8574 -4 -1.6195 -12.4774 -4 -3.1159 -8.5 -4 -8.5 -8.5 -4 0
3 16 -4.6122 -4 -13.0975 -3.1159 -4 -12.4774 -8.5 -4 -8.5
3 16 -13.0975 -4 -4.6122 -8.5 -4 -8.5 -12.4774 -4 -3.1159
3 16 0 -4 -11.8579 0 -4 -8.5 -1.6195 -4 -11.8574
3 16 -8.5 -4 0 -11.8579 -4 0 -11.8574 -4 -1.6195
4 16 13.0975 -4 -4.6122 8.5 -4 -8.5 10 -4 -10 14.2426 -4 -5.7574
4 16 5.7574 -4 -14.2426 10 -4 -10 8.5 -4 -8.5 4.6122 -4 -13.0975
4 16 12.4774 -4 -3.1159 11.8574 -4 -1.6195 8.5 -4 0 8.5 -4 -8.5
4 16 1.6195 -4 -11.8574 3.1159 -4 -12.4774 8.5 -4 -8.5 0 -4 -8.5
3 16 13.0975 -4 -4.6122 12.4774 -4 -3.1159 8.5 -4 -8.5
3 16 4.6122 -4 -13.0975 8.5 -4 -8.5 3.1159 -4 -12.4774
3 16 11.8579 -4 0 8.5 -4 0 11.8574 -4 -1.6195
3 16 0 -4 -8.5 0 -4 -11.8579 1.6195 -4 -11.8574
5 24 -7.85315 0 -3.25295 -8.5 0 0 -8.5 -4 0 -8 3.25 0
5 24 -6.01035 0 -6.01035 -7.85315 0 -3.25295 -7.85315 -4 -3.25295 -7.3912 3.25 -3.0616
5 24 0 0 8.5 3.25295 0 7.85315 3.0616 3.25 7.3912 3.25295 -4 7.85315
5 24 3.25295 0 7.85315 6.01035 0 6.01035 6.01035 -4 6.01035 5.6568 3.25 5.6568
5 24 -7.5 6.5 0 -6.92925 6.5 -2.87025 -7.3912 3.25 -3.0616 -6.92925 9.5 -2.87025
5 24 -7.85315 0 3.25295 -6.01035 0 6.01035 -6.01035 -4 6.01035 -5.6568 3.25 5.6568
5 24 0 6.5 -7.5 2.87025 6.5 -6.92925 2.87025 9.5 -6.92925 3.0616 3.25 -7.3912
5 24 6.92925 6.5 2.87025 5.30325 6.5 5.30325 5.30325 9.5 5.30325 5.6568 3.25 5.6568
5 24 0 0 -8.5 -3.25295 0 -7.85315 -3.0616 3.25 -7.3912 -3.25295 -4 -7.85315
5 24 0 6.5 7.5 -2.87025 6.5 6.92925 -3.0616 3.25 7.3912 -2.87025 9.5 6.92925
5 24 -5.30325 6.5 -5.30325 -2.87025 6.5 -6.92925 -3.0616 3.25 -7.3912 -2.87025 9.5 -6.92925
5 24 6.01035 0 6.01035 7.85315 0 3.25295 7.85315 -4 3.25295 7.3912 3.25 3.0616
5 24 2.87025 6.5 -6.92925 5.30325 6.5 -5.30325 5.30325 9.5 -5.30325 5.6568 3.25 -5.6568
5 24 -2.87025 6.5 6.92925 -5.30325 6.5 5.30325 -5.6568 3.25 5.6568 -5.30325 9.5 5.30325
5 24 -6.92925 6.5 2.87025 -7.5 6.5 0 -8 3.25 0 -7.5 9.5 0
5 24 7.85315 0 -3.25295 6.01035 0 -6.01035 5.6568 3.25 -5.6568 6.01035 -4 -6.01035
5 24 2.87025 6.5 6.92925 0 6.5 7.5 0 3.25 8 0 9.5 7.5
5 24 8.5 0 0 7.85315 0 -3.25295 7.85315 -4 -3.25295 7.3912 3.25 -3.0616
5 24 -3.25295 0 -7.85315 -6.01035 0 -6.01035 -6.01035 -4 -6.01035 -5.6568 3.25 -5.6568
5 24 6.01035 0 -6.01035 3.25295 0 -7.85315 3.0616 3.25 -7.3912 3.25295 -4 -7.85315
5 24 7.5 6.5 0 6.92925 6.5 2.87025 6.92925 9.5 2.87025 7.3912 3.25 3.0616
5 24 -6.92925 6.5 -2.87025 -5.30325 6.5 -5.30325 -5.6568 3.25 -5.6568 -5.30325 9.5 -5.30325
5 24 -6.01035 0 6.01035 -3.25295 0 7.85315 -3.25295 -4 7.85315 -3.0616 3.25 7.3912
5 24 -3.25295 0 7.85315 0 0 8.5 0 3.25 8 0 -4 8.5
5 24 -8.5 0 0 -7.85315 0 3.25295 -7.85315 -4 3.25295 -7.3912 3.25 3.0616
5 24 5.30325 6.5 -5.30325 6.92925 6.5 -2.87025 6.92925 9.5 -2.87025 7.3912 3.25 -3.0616
5 24 -5.30325 6.5 5.30325 -6.92925 6.5 2.87025 -6.92925 9.5 2.87025 -7.3912 3.25 3.0616
5 24 5.30325 6.5 5.30325 2.87025 6.5 6.92925 3.0616 3.25 7.3912 2.87025 9.5 6.92925
5 24 7.85315 0 3.25295 8.5 0 0 8 3.25 0 8.5 -4 0
5 24 3.25295 0 -7.85315 0 0 -8.5 0 3.25 -8 0 -4 -8.5
5 24 -2.87025 6.5 -6.92925 0 6.5 -7.5 0 3.25 -8 0 9.5 -7.5
5 24 6.92925 6.5 -2.87025 7.5 6.5 0 7.5 9.5 0 8 3.25 0
Status:
Official
Unofficial parents
Part Events:
Archived Part Events:
2021-03-26 22:25:01
2022-04-09 20:30:01
2022-07-21 16:15:01
Where does this number come from? I have an official-origin reference to 33233 for this shape.
2023-01-04 10:25:01
got the number from BL
adapted to new subfile
2023-12-18 22:39:59
I think the top shape can be subfiled into a quarter.
2023-12-18 22:54:47
yes, but the structure from s\6821s03.dat (or even the official stud5.dat) seems better, maybe the quarter can be used in both parts...
2023-12-18 23:34:02
I am thinking about a prim vor that as it is basically a Scala stud without the centre, but it is only used once in this part...
2023-12-19 11:20:36
thats why we said to use a quarter prim, which can be used 3 times here and in s\6821s03.dat...
As long as the top stud is used only once I'm fine with the actual solution.
Using it as a quarter would be nice, but I think its not worth the work, isn't it?
Using it as a quarter would be nice, but I think its not worth the work, isn't it?
Update ring primitives via script. This will not reset the vote status of the part.
2024-05-09 14:09:00
2024-05-21 04:13:10
2024-05-28 02:57:19
Release 2024-04
Creative Commons Attribution License information
This part is copyright © Gerald Lasser
Licensed under CC BY 4.0
Edits:
LDraw.org Parts Tracker,
Orion Pobursky,
3D View
Website copyright ©2003-2025 LDraw.org, see Legal Info for details.
LDraw is a completely unofficial, community run free CAD system which represents official parts produced by the LEGO company.
LDraw™ is a trademark owned and licensed by the Estate of James Jessiman
LEGO® is a registered trademark of the LEGO Group, which does not sponsor,
endorse, or authorize this site. Visit the official Lego website at
http://www.lego.com