Download
Official File parts/s/65093s01.dat
~Brick 2 x 5 with Two Pins - Half
File Header:
0 ~Brick 2 x 5 with Two Pins - Half 0 Name: s\65093s01.dat 0 Author: Gerald Lasser [GeraldLasser] 0 !LDRAW_ORG Subpart UPDATE 2023-06 0 !LICENSE Licensed under CC BY 4.0 : see CAreadme.txt 0 BFC CERTIFY CCW 0 !HISTORY 2023-11-07 [Cheenzo] Fixed T-Junctions 0 !HISTORY 2023-11-19 [OrionP] Official Update 2023-06
Show contents
0 // Bottom 4 16 -19 0 -17 -21 0 -17 -21 0 17 -19 0 17 3 16 -40 0 -20 -37 0 -17 -21 0 -17 3 16 -21 0 -17 -19 0 -17 -40 0 -20 4 16 -19 0 -17 19 0 -17 40 0 -20 -40 0 -20 3 16 37 0 -17 40 0 -20 21 0 -17 3 16 19 0 -17 21 0 -17 40 0 -20 4 16 -37 0 13.5 -40 0 14.5 -40 0 20 -37 0 17 3 16 -39 0 11.5 -40 0 14.5 -37 0 13.5 4 16 -50 0 14.5 -40 0 14.5 -39 0 11.5 -47 0 11.5 4 16 -40 0 -20 -40 0 -14.5 -37 0 -13.5 -37 0 -17 3 16 -40 0 -14.5 -39 0 -11.5 -37 0 -13.5 4 16 -39 0 -11.5 -40 0 -14.5 -50 0 -14.5 -47 0 -11.5 3 16 -47 0 -11.5 -50 0 -14.5 -50 0 -5.1433 3 16 -50 0 14.5 -47 0 11.5 -50 0 5.1433 4 16 -50 0 5.1433 -47 0 11.5 -47 0 -11.5 -50 0 -5.1433 0 // Centre Cavity 3 16 -7.5 -18.5 -7.5 0 -18.5 -7.5 -19 -18.5 -17 4 16 -7.5 -18.5 -7.5 -19 -18.5 -17 -19 -18.5 17 -7.5 -18.5 0 3 16 -7.5 -18.5 0 -19 -18.5 17 -7.5 -18.5 7.5 4 16 19 -18.5 17 0 -18.5 7.5 -7.5 -18.5 7.5 -19 -18.5 17 0 // Outer Cavity 0 BFC INVERTNEXT 1 16 -37 -9.25 0 0 16 0 9.25 0 0 0 0 17 box3u2p.dat 1 16 -39 0 -13.5 2 0 0 0 -18.5 0 0 0 2 1-4cylo.dat 1 16 -39 0 -13.5 2 0 0 0 -1 0 0 0 2 1-4chrd.dat 1 16 -39 -18.5 -13.5 2 0 0 0 -1 0 0 0 2 1-4ndis.dat 1 16 -39 0 13.5 2 0 0 0 -18.5 0 0 0 -2 1-4cylo.dat 1 16 -39 0 13.5 2 0 0 0 -1 0 0 0 -2 1-4chrd.dat 1 16 -39 -18.5 13.5 2 0 0 0 -1 0 0 0 -2 1-4ndis.dat 1 16 -37 -9.25 15.25 0 -1 0 0 0 -9.25 1.75 0 0 rect2p.dat 1 16 -37 -9.25 -15.25 0 -1 0 0 0 -9.25 1.75 0 0 rect2p.dat 0 BFC INVERTNEXT 1 16 -46 -10 0 0 -1 0 0 5 -5 11.5 0 0 box2-7.dat 1 16 -43 0 0 0 0 -4 0 1 0 11.5 0 0 recte3.dat 4 16 -45 -20 -11.5 -39 0 -11.5 -47 0 -11.5 -47 -10 -11.5 3 16 -39 -18.5 -11.5 -39 0 -11.5 -45 -20 -11.5 4 16 -45 -20 11.5 -47 -10 11.5 -47 0 11.5 -39 0 11.5 3 16 -45 -20 11.5 -39 0 11.5 -39 -18.5 11.5 3 16 -37 -18.5 -13.5 -37 -18.5 -11.5 -21 -18.5 -17 3 16 -37 -18.5 17 -21 -18.5 17 -37 -18.5 13.5 3 16 -37 -18.5 13.5 -21 -18.5 17 -37 -18.5 11.5 4 16 -37 -18.5 -11.5 -37 -18.5 11.5 -21 -18.5 17 -21 -18.5 -17 4 16 -37 -18.5 -11.5 -39 -18.5 -11.5 -39 -18.5 11.5 -37 -18.5 11.5 3 16 -37 -18.5 -17 -37 -18.5 -13.5 -21 -18.5 -17 0 // Trough Hole for Arresting Clip 1 16 -45 -22.5 0 0 -1 0 0 0 2.5 -11.5 0 0 rect3.dat 3 16 -39 -25 7 -39 -25 11.5 -39 -18.5 11.5 3 16 -39 -18.5 -11.5 -39 -25 -11.5 -39 -25 -7 4 16 -39 -18.5 -11.5 -39 -25 -7 -39 -25 7 -39 -18.5 11.5 4 16 -39 -25 -11.5 -39 -18.5 -11.5 -45 -20 -11.5 -45 -25 -11.5 4 16 -45 -20 11.5 -39 -18.5 11.5 -39 -25 11.5 -45 -25 11.5 1 16 -39 -21.75 0 0 1 0 0 0 3.25 11.5 0 0 recte3.dat 1 16 -42 -25 12.25 -3 0 0 0 1 0 0 0 -.75 rect3.dat 1 16 -42 -25 -12.25 3 0 0 0 1 0 0 0 .75 rect3.dat 3 16 -39 -25 13 -36.5 -25 13 -36.5 -25 14.5 3 16 -48 -25 14.5 -48 -25 13 -45 -25 13 3 16 -48 -25 -13 -48 -25 -14.5 -45 -25 -13 3 16 -39 -25 -13 -36.5 -25 -14.5 -36.5 -25 -13 4 16 -36.5 -25 -14.5 -39 -25 -13 -45 -25 -13 -48 -25 -14.5 4 16 -45 -25 13 -39 -25 13 -36.5 -25 14.5 -48 -25 14.5 1 16 -42.25 -25 -13.75 -5.75 0 0 0 1 0 0 0 -.75 recte3.dat 1 16 -42.25 -25 13.75 5.75 0 0 0 1 0 0 0 .75 recte3.dat 0 // Guidance 1 16 -47.25 -27.5 0 0 -.75 0 0 0 -2.5 13 0 0 box2-7.dat 1 16 -46.5 -28.5 13 1.5 0 0 0 0 -1.5 0 -26 0 1-4cylo.dat 1 16 -46.5 -28.5 13 1.5 0 0 0 0 -1.5 0 -1 0 1-4chrd.dat 1 16 -46.5 -28.5 -13 1.5 0 0 0 0 -1.5 0 1 0 1-4chrd.dat 3 16 -45 -25 -13 -45 -25 -11.5 -45 -28.5 -13 3 16 -45 -25 11.5 -45 -25 13 -45 -28.5 13 4 16 -45 -25 -11.5 -45 -25 11.5 -45 -28.5 13 -45 -28.5 -13 4 16 -45 -28.5 13 -45 -25 13 -48 -25 13 -46.5 -30 13 3 16 -48 -30 13 -46.5 -30 13 -48 -25 13 3 16 -46.5 -30 -13 -48 -30 -13 -48 -25 -13 4 16 -45 -25 -13 -45 -28.5 -13 -46.5 -30 -13 -48 -25 -13 2 24 -48 -25 13 -45 -25 13 2 24 -48 -25 -13 -45 -25 -13 2 24 -45 -28.5 13 -45 -25 13 2 24 -45 -25 -13 -45 -28.5 -13 0 // Arresting Clip 1 16 -39 -27.75 0 0 -1 0 0 0 2.75 7 0 0 box4-4a.dat 1 16 -38.5 -30.5 -7 0 0 -1.5 -1.5 0 0 0 14 0 1-4cylo.dat 1 16 -38.5 -30.5 -7 0 0 -1.5 -1.5 0 0 0 1 0 1-4chrd.dat 1 16 -38.5 -30.5 7 0 0 -1.5 -1.5 0 0 0 -1 0 1-4chrd.dat 4 16 -38.5 -32 -7 -40 -30.5 -7 -39 -30.5 -7 -37.5 -32 -7 4 16 -40 -30.5 7 -38.5 -32 7 -37.5 -32 7 -39 -30.5 7 1 16 -38 -32 0 -.5 0 0 0 1 0 0 0 -7 rect2p.dat 3 16 -37.5 -32 13 -36.5 -32 13 -39 -30.5 13 3 16 -36.5 -32 -13 -37.5 -32 -13 -39 -30.5 -13 4 16 -36.5 -25 13 -39 -25 13 -39 -30.5 13 -36.5 -32 13 4 16 -36.5 -32 -13 -39 -30.5 -13 -39 -25 -13 -36.5 -25 -13 3 16 -39 -25 -11.5 -39 -25 -13 -39 -30.5 -13 3 16 -39 -25 13 -39 -25 11.5 -39 -30.5 13 4 16 -39 -25 -11.5 -39 -30.5 -13 -39 -30.5 -7 -39 -25 -7 4 16 -39 -25 11.5 -39 -25 7 -39 -30.5 7 -39 -30.5 13 1 16 -37.5 -30.5 -13 0 0 -1.5 -1.5 0 0 0 6 0 1-4cylo.dat 1 16 -37.5 -30.5 13 0 0 -1.5 -1.5 0 0 0 -6 0 1-4cylo.dat 1 16 -37.5 -30.5 -13 0 0 -1.5 -1.5 0 0 0 1 0 1-4chrd.dat 1 16 -37.5 -30.5 13 0 0 -1.5 -1.5 0 0 0 -1 0 1-4chrd.dat 2 24 -37.5 -32 -13 -36.5 -32 -13 2 24 -37.5 -32 13 -36.5 -32 13 1 16 -36.5 -28.5 0 0 -1 0 0 0 -3.5 -13 0 0 rect3.dat 4 16 -36.5 -32 13 -37.5 -32 7 -37.5 -32 -7 -36.5 -32 -13 3 16 -37.5 -32 13 -37.5 -32 7 -36.5 -32 13 3 16 -37.5 -32 -13 -36.5 -32 -13 -37.5 -32 -7 2 24 -39 -25 -13 -36.5 -25 -13 2 24 -39 -25 13 -36.5 -25 13 2 24 -39 -25 -13 -39 -30.5 -13 2 24 -39 -30.5 13 -39 -25 13 0 // Outside Wheel Pin Block 4 16 -36.5 -22 14.5 -36.5 -25 13 -36.5 -25 -13 -36.5 -22 -14.5 3 16 -36.5 -25 -13 -36.5 -25 -14.5 -36.5 -22 -14.5 3 16 -36.5 -25 14.5 -36.5 -25 13 -36.5 -22 14.5 1 16 -36.5 -23.5 0 0 -1 0 0 0 1.5 -14.5 0 0 recte3.dat 4 16 -39.5 -22 -14.5 -36.5 -22 -14.5 -36.5 -25 -14.5 -48 -25 -14.5 4 16 -39.5 -22 -14.5 -48 -25 -14.5 -48 -20 -14.5 -40 -13 -14.5 3 16 -40 -13 -14.5 -48 -20 -14.5 -50 -10 -14.5 4 16 -36.5 -25 14.5 -36.5 -22 14.5 -39.5 -22 14.5 -48 -25 14.5 4 16 -48 -20 14.5 -48 -25 14.5 -39.5 -22 14.5 -40 -13 14.5 3 16 -48 -20 14.5 -40 -13 14.5 -50 -10 14.5 4 16 -50 -10 14.5 -40 -13 14.5 -40 0 14.5 -50 0 14.5 4 16 -40 0 -14.5 -40 -13 -14.5 -50 -10 -14.5 -50 0 -14.5 2 24 -39.5 -22 14.5 -36.5 -22 14.5 2 24 -36.5 -22 -14.5 -39.5 -22 -14.5 4 16 -48 -20 -14.5 -48 -25 -13 -48 -25 13 -48 -20 14.5 3 16 -48 -25 13 -48 -25 14.5 -48 -20 14.5 3 16 -48 -25 -14.5 -48 -25 -13 -48 -20 -14.5 1 16 -48 -22.5 0 0 1 0 0 0 2.5 14.5 0 0 recte3.dat 2 24 -50 -10 14.5 -48 -20 14.5 2 24 -50 -10 14.5 -50 -10 6.7641 2 24 -50 -10 -14.5 -48 -20 -14.5 2 24 -50 -10 -14.5 -50 -10 -6.7641 3 16 -50 -10 14.5 -50 -10 6.7641 -48 -20 14.5 3 16 -48 -20 -14.5 -50 -10 -6.7641 -50 -10 -14.5 4 16 -50 -10 6.7641 -50 -10 -6.7641 -48 -20 -14.5 -48 -20 14.5 4 16 -50 0 5.1433 -50 -10 6.7641 -50 -10 14.5 -50 0 14.5 4 16 -50 0 -14.5 -50 -10 -14.5 -50 -10 -6.7641 -50 0 -5.1433 2 24 -50 -10 -14.5 -50 0 -14.5 2 24 -50 -10 14.5 -50 0 14.5 2 24 -50 0 -14.5 -50 0 -5.1433 2 24 -50 0 5.1433 -50 0 14.5 2 24 -50 0 14.5 -40 0 14.5 2 24 -50 0 -14.5 -40 0 -14.5 0 // Outside Main Block 1 16 -39.75 -17.5 -17.25 0 0 .25 0 1 -4.5 -2.75 0 0 rect.dat 1 16 -40 -6.5 -17.25 0 1 0 0 0 6.5 2.75 0 0 rect3.dat 1 16 -39.75 -17.5 17.25 .25 0 0 -4.5 1 0 0 0 2.75 rect.dat 1 16 -40 -6.5 17.25 0 1 0 0 0 6.5 2.75 0 0 rect3.dat 1 16 0 -6.5 -20 0 0 40 6.5 0 0 0 1 0 rect1.dat 4 16 39.5 -22 -20 -39.5 -22 -20 -40 -13 -20 40 -13 -20 2 24 39.5 -22 -20 -39.5 -22 -20 4 16 -10 -22 10 -36.5 -22 14.5 -36.5 -22 -14.5 -10 -22 0 3 16 -10 -22 0 -36.5 -22 -14.5 -10 -22 -10 4 16 -39.5 -22 20 -36.5 -22 14.5 -10 -22 10 0 -22 10 3 16 -36.5 -22 -14.5 -39.5 -22 -14.5 -39.5 -22 -20 3 16 -39.5 -22 14.5 -36.5 -22 14.5 -39.5 -22 20 4 16 -10 -22 -10 -36.5 -22 -14.5 -39.5 -22 -20 0 -22 -10 3 16 0 -22 -10 -39.5 -22 -20 39.5 -22 -20 0 // Wheel Pin 1 16 -51 -.1716 -5.40005 -1 0 0 0 -1 .1716 0 0 .25675 rect3.dat 1 16 -51 0 0 -1 0 0 0 -1 0 0 0 5.1433 rect1.dat 1 16 -51 -.1716 5.40005 1 0 0 0 -1 .1716 0 0 -.25675 rect3.dat 1 16 -52 -6 0 0 2 0 0 0 8 8 0 0 1-8cylo.dat 1 16 -52 -6 0 0 2 0 0 0 8 -8 0 0 1-8cylo.dat 1 16 -52 -6 0 0 1 0 0 0 -8 8 0 0 2-4edge.dat 1 16 -52 -6 0 0 2 0 0 0 -8 8 0 0 2-4cyli.dat 1 16 -50 -6 0 0 2 0 0 0 -8 8 0 0 1-4cyls.dat 1 16 -50 -6 0 0 2 0 0 0 -8 -8 0 0 1-4cyls.dat 2 24 -49.3218 -13.3912 3.0616 -49.2 -14 0 2 24 -49.6686 -11.6568 5.6568 -49.3218 -13.3912 3.0616 2 24 -50 -10 6.7641 -49.6686 -11.6568 5.6568 2 24 -49.3218 -13.3912 -3.0616 -49.6686 -11.6568 -5.6568 2 24 -49.6686 -11.6568 -5.6568 -50 -10 -6.7641 2 24 -49.3218 -13.3912 -3.0616 -49.2 -14 0 2 24 -50 -10 6.7641 -50 -9.0616 7.3912 2 24 -50 -9.0616 7.3912 -50 -6 8 2 24 -50 -10 -6.7641 -50 -9.0616 -7.3912 2 24 -50 -9.0616 -7.3912 -50 -6 -8 5 24 -50 -.3432 -5.6568 -52 -.3432 -5.6568 -50 0 -5.1433 -52 -2.9384 -7.3912 5 24 -52 -.3432 5.6568 -50 -.3432 5.6568 -52 0 5.1433 -52 -2.9384 7.3912 1 16 -52 -6 0 0 1 0 -2 0 0 0 0 2 3-8ring3.dat 1 16 -52 -6 0 0 1 0 -2 0 0 0 0 -2 3-8ring3.dat 1 16 -52 -6 0 0 1 0 -6 0 0 0 0 6 4-4edge.dat 3 16 -52 -1.7574 4.2426 -52 -.3432 5.6568 -52 0 5.1433 3 16 -52 0 -5.1433 -52 -.3432 -5.6568 -52 -1.7574 -4.2426 4 16 -52 -1.7574 -4.2426 -52 -1.7574 4.2426 -52 0 5.1433 -52 0 -5.1433 1 16 -50 -6 0 0 1 0 1 0 0 0 0 -1 connect10.dat
Status:
Official Official
Unofficial parents
Part Events:
Archived Part Events:
Gerald Lasser [GeraldLasser]
Part Library Admin
initially submitted the part.
2021-11-29 23:10:01
Max Martin Richter [MMR1988]
Senior Part Reviewer
posted a vote of Hold.
2021-12-11 16:50:01
The collar produces a bleed-in. Maybe we need a new primitive a collar that is flat on on side?
Gerald Lasser [GeraldLasser]
Part Library Admin
made the following comment.
2021-12-19 15:15:01
yes, I think we need another pin prim
Gerald Lasser [GeraldLasser]
Part Library Admin
submitted a new version of the part.
2022-05-11 08:05:02
included new connector prim to avoid bleeding

Existing certification-votes were deleted.
Magnus Forsberg [MagFors]
Part Library Admin
posted a vote of Certify.
2022-05-19 21:45:01
Max Martin Richter [MMR1988]
Senior Part Reviewer
posted a vote of Hold.
2022-06-09 20:15:01
Missing conds:

5 24 -50 -.3432 -5.6568 -52 -.3432 -5.6568 -50 0 -5.1433 -52 -2.9384 -7.3912
5 24 -52 -.3432 5.6568 -50 -.3432 5.6568 -52 0 5.1433 -52 -2.9384 7.3912
Gerald Lasser [GeraldLasser]
Part Library Admin
submitted a new version of the part.
2022-07-10 10:40:01
added conds

Existing certification-votes were deleted.
Max Martin Richter [MMR1988]
Senior Part Reviewer
posted a vote of Certify.
2022-11-04 20:50:01
Willy Tschager [Holly-Wood]
Senior Part Reviewer
made the following comment.
2022-11-08 13:40:01
* What is the purpose of this T-junk:

2 5 -37 -18.5 -14 -37 -18.5 -13.5
2 5 -37 -18.5 13.5 -37 -18.5 14
Max Martin Richter [MMR1988]
Senior Part Reviewer
made the following comment.
2022-11-22 21:55:01
missed this...
Takeshi Takahashi [RainbowDolphin]
Senior Part Reviewer
posted a vote of Certify.
2023-08-30 13:52:46
Magnus Forsberg [MagFors]
Part Library Admin
posted a vote of Hold.
2023-11-07 21:38:51
Annoying, but I think these should be fixed.
Vincent Messenet [Cheenzo]
Part Header Editor
submitted a new version of the part.
2023-11-07 22:01:54
Fixed T-Js
Magnus Forsberg [MagFors]
Part Library Admin
posted a vote of Certify.
2023-11-07 22:13:44
Thanks.
Rene Rechthaler [Blechtaler]
Part Header Editor
posted a vote of Hold.
2023-11-07 22:29:17
the inner side of the top clip is BFC invers
Magnus Forsberg [MagFors]
Part Library Admin
posted a vote of Hold.
2023-11-07 22:32:54
Yep.
Vincent Messenet [Cheenzo]
Part Header Editor
submitted a new version of the part.
2023-11-08 08:08:16
Oh yes...
Magnus Forsberg [MagFors]
Part Library Admin
posted a vote of Certify.
2023-11-08 20:25:24
Takeshi Takahashi [RainbowDolphin]
Senior Part Reviewer
posted a vote of Certify.
2023-11-09 14:24:18
Orion Pobursky [OrionP]
Part Library Admin
posted a vote of Admin Review.
2023-11-09 14:34:42
Orion Pobursky [OrionP]
Part Library Admin
2023-11-19 03:08:46
Release 2023-06
Creative Commons Attribution License information

This part is copyright © Gerald Lasser
Licensed under CC BY 4.0

Edits:
LDraw.org Parts Tracker, Vincent Messenet, Orion Pobursky,

Website copyright ©2003-2025 LDraw.org, see Legal Info for details.

LDraw is a completely unofficial, community run free CAD system which represents official parts produced by the LEGO company.

LDraw™ is a trademark owned and licensed by the Estate of James Jessiman
LEGO® is a registered trademark of the LEGO Group, which does not sponsor, endorse, or authorize this site. Visit the official Lego website at http://www.lego.com