Unofficial File parts/s/43722py0s01.dat
File Header:
0 ~Wing 2 x 3 Right with Silver Trapezoid Pattern - Top face
0 Name: s\43722py0s01.dat
0 Author: Massimo Maso [Sirio]
0 !LDRAW_ORG Unofficial_Subpart
0 !LICENSE Licensed under CC BY 4.0 : see CAreadme.txt
0 BFC CERTIFY CCW
Show contents
0 // Primitives
1 16 -8.4426 0 3.8647 0 0 3 0 1 0 3 0 0 3-16ndis.dat
1 16 -8.4426 0 3.8647 0 0 -3 0 1 0 3 0 0 1-16tndis.dat
1 80 -8.4426 0 3.8647 0 0 3 0 1 0 3 0 0 3-16chrd.dat
1 80 -8.4426 0 3.8647 0 0 -3 0 1 0 3 0 0 1-16chrd.dat
0 // Silver faces
4 80 0 0 -12 -5.6709 0 5.0128 -8.4426 0 6.8647 -9.5907 0 6.6364
4 80 0 0 -12 -9.5907 0 6.6364 -10.75 0 6.25 0 0 -26
0 // Neutral faces
4 16 20 0 30 -19 0 30 -8.4426 0 6.8647 -5.4426 0 6.8647
4 16 20 0 30 -5.4426 0 6.8647 -5.6709 0 5.0128 0 0 -12
4 16 20 0 -30 20 0 30 0 0 -12 0 0 -26
4 16 -19 0 27 -9.5907 0 6.8647 -8.4426 0 6.8647 -19 0 30
4 16 -19 0 27 -10.75 0 6.25 -9.5907 0 6.6364 -9.5907 0 6.8647
4 16 -19 0 27 0 0 -30 0 0 -26 -10.75 0 6.25
3 16 20 0 -30 0 0 -26 0 0 -30
Status:
Needs 2 More Votes (N)
This part has the following automated holds from the Parts Tracker
- No path of certified files to a certified or official parent in the parts folder
Current Votes:
None
Official parents and subparts
Part Events:
It requires a new version of 43722s01 without the upper face. Already sent to administrator.
* Did you try to stack a Plate 1x3 on top of it? Is there a small border between the plate and the pattern?
1 16 -10 -8 0 0 0 -1 0 1 0 1 0 0 3623.dat
Looking at the pics:
https://rebrickable.com/media/parts/photos/0/43723pr0003-0-4ca5114d-0990-4955-8618-7ff1b6e1f231.jpg
it seems the tip doesn't go that far and adding a small border as on the wedge side would solve this.
2 4 -.6 0 -30 -.6 0 -2
1 16 -10 -8 0 0 0 -1 0 1 0 1 0 0 3623.dat
Looking at the pics:
https://rebrickable.com/media/parts/photos/0/43723pr0003-0-4ca5114d-0990-4955-8618-7ff1b6e1f231.jpg
it seems the tip doesn't go that far and adding a small border as on the wedge side would solve this.
2 4 -.6 0 -30 -.6 0 -2
This isn't white, it shall be silver (80)
2024-06-07 08:31:11
BL says silver
RB says DkBG
the BI shows something between DBG and LBG, so I would go for Metallic Silver as BL says.
Or anybody's got this set?
RB says DkBG
the BI shows something between DBG and LBG, so I would go for Metallic Silver as BL says.
Or anybody's got this set?
I do, and you're correct. It is Metallic silver.
Fixed color of trapezoid and description.
2024-06-10 12:18:14
* Tip does not not go further than:
2 69 20 -4 -25 -10 0 -25
https://rebrickable.com/media/parts/photos/0/43723pr0003-0-4ca5114d-0990-4955-8618-7ff1b6e1f231.jpg
2 69 20 -4 -25 -10 0 -25
https://rebrickable.com/media/parts/photos/0/43723pr0003-0-4ca5114d-0990-4955-8618-7ff1b6e1f231.jpg
Need to be adapted to changed subfile.
2025-09-09 16:21:21
Yes, the pattern end in line with the stud
2 5 10 0 -26 0 0 -26
2 5 10 0 -26 0 0 -26
2025-09-09 16:29:14
Pattern still need corrections
Aligned the tip to the stud.
Now, however, there is a little more space between the colored zone and the edge.
Now, however, there is a little more space between the colored zone and the edge.
Creative Commons Attribution License information
This part is copyright © Massimo Maso
Licensed under CC BY 4.0
Edits:
LDraw.org Parts Tracker,