Unofficial File parts/u9653.dat
Part Attributes:
File Header:
0 ~Electric Switch: Male Plug
0 Name: u9653.dat
0 Author: Javier Orquera [kuramapika1]
0 !LDRAW_ORG Unofficial_Part
0 !LICENSE Licensed under CC BY 4.0 : see CAreadme.txt
0 !HELP To be used in 4110 assemblies parts
0 BFC CERTIFY CCW
0 !HISTORY 2025-04-24 [kuramapika1] Fixed color
Show contents
1 16 0 0 0 1 0 0 0 1 0 0 0 1 s\u9653s01.dat
1 495 0 0 0 1 0 0 0 1 0 0 0 1 s\u9653s02.dat
Status:
Needs More Votes (N)
This part has the following automated holds from the Parts Tracker
-
Has uncertified subfiles
Current Votes:
None
Official parents and subparts
Part Events:
2023-09-11 14:43:42
2023-09-12 22:00:59
I whant to submit the corrections Magnus ask me to do but cannot do it. It gives me the following:
"m_plug.dat
Pattern part description must end with "Pattern""
Why? Also, this is the same warning I resive the first time.
"m_plug.dat
Pattern part description must end with "Pattern""
Why? Also, this is the same warning I resive the first time.
The reason is that m_plug isn't a proper part name and it's confusing the validation script. If the number is unknown it needs a "u" number. But first lets determine if this is even a part.
2023-09-13 00:52:15
Ok; and these apply to f_plug.dat as well.
2023-09-13 10:08:47
why is the outside part of the rivet only in BFC inverse? there should be another non-inverted hull (a bit bigger) like at the f_plug...
and why dont you use the prim for electric pins (plug34.dat)?
and why dont you use the prim for electric pins (plug34.dat)?
Added a 4-4cylo as cover for the rivet.
Plug34.dat: I do not use it because it have a diferent shape than the requiered in real life part (unless it is another variant of the part)
Any suggestion on how to manage the hard-color in this part?
Plug34.dat: I do not use it because it have a diferent shape than the requiered in real life part (unless it is another variant of the part)
Any suggestion on how to manage the hard-color in this part?
Restoring the Hold vote
2023-09-14 16:15:48
checked it: you could use a plug34.dat scaled at 75% length and use a cyli for the rest...
(the pin has the same type, diameter and length as the standard plug, but is only slotted to 3/4)
no need to make that much code.
(the pin has the same type, diameter and length as the standard plug, but is only slotted to 3/4)
no need to make that much code.
2023-09-14 17:32:22
plug34.dat can't be used sance it have edge lines in where do not belong (for these shape).
- m_plug and f_plug have a 90 degrees mismatching orientation
- filename is not ok
- missing leading ~ in title
- could become a primitive
- filename is not ok
- missing leading ~ in title
- could become a primitive
2024-10-28 14:05:07
2024-10-28 16:45:28
Now they have the same orientation, but I think it would be better to have them on the z-axis, like most of the other plugs.
Let us know how to renumber it, when you have a u-number.
Let us know how to renumber it, when you have a u-number.
The loose edgelines placed on the gold half, will be coloured silver.
2 4 -6 5.75577 -5.6568 -14.5 5.7558 -5.6568
2 4 -14.5 5.7558 4.63406 -6 5.75577 4.63406
2 4 -14.5 5.6568 -5.6568 -6.09897 5.6568 -5.6568
2 4 -6.09897 5.6568 4.63406 -6.09897 5.6568 -5.6568
2 4 -6.09897 5.6568 4.63406 -14.5 5.6568 4.63406
Too many decimals?
Adding an edge ring looks better?
1 297 -6.09897 0 0 0 1 0 0 0 4.63405685 4.63405685 0 0 4-4edge.dat
the added edge lines on the plug need to be made of primitives
2 14 6 -1.339452 -3.233666 6 0 -3.500017
2 14 6 3.23365 -1.33945 6 3.5 0
2 14 6 1.33945 3.23365 6 0 3.5
2 14 6 -3.233666 1.339452 6 -3.500017 0
2 4 -6 5.75577 -5.6568 -14.5 5.7558 -5.6568
2 4 -14.5 5.7558 4.63406 -6 5.75577 4.63406
2 4 -14.5 5.6568 -5.6568 -6.09897 5.6568 -5.6568
2 4 -6.09897 5.6568 4.63406 -6.09897 5.6568 -5.6568
2 4 -6.09897 5.6568 4.63406 -14.5 5.6568 4.63406
Too many decimals?
Adding an edge ring looks better?
1 297 -6.09897 0 0 0 1 0 0 0 4.63405685 4.63405685 0 0 4-4edge.dat
the added edge lines on the plug need to be made of primitives
2 14 6 -1.339452 -3.233666 6 0 -3.500017
2 14 6 3.23365 -1.33945 6 3.5 0
2 14 6 1.33945 3.23365 6 0 3.5
2 14 6 -3.233666 1.339452 6 -3.500017 0
2024-10-28 18:13:46
Might be better to split in two since you want to hardcode it in colour.
2024-10-29 12:54:35
"parts/m_plug.dat" to "parts/u9653.dat"
Orientation on Z-axis and u9653 divided into two parts.
Wrong colour used.
Pearl gold is a plastic type. Should maybe use copper metal, 495
Pearl gold is a plastic type. Should maybe use copper metal, 495
Error are fixed. Did some other corrections.
Creative Commons Attribution License information
This part is copyright © Javier Orquera
Licensed under CC BY 4.0
Edits:
LDraw.org Parts Tracker,
3D View
Website copyright ©2003-2025 LDraw.org, see Legal Info for details.
LDraw is a completely unofficial, community run free CAD system which represents official parts produced by the LEGO company.
LDraw™ is a trademark owned and licensed by the Estate of James Jessiman
LEGO® is a registered trademark of the LEGO Group, which does not sponsor,
endorse, or authorize this site. Visit the official Lego website at
http://www.lego.com
Why is it hardcoded in metal and copper?
Why do you have Pattern in the description?
The Keywords are not set numbers, those are Bricklink partnumbers.
If this is a separate part, then it should have a uXXXX-number.
As included in an assembly, non-removable, the description should start with a ~ tilde.