Hi, since this is my first part submitted, some things to definitely check:
- The stud4 groups might not be aligned correctly. The bottom surface of the 4x8 piece seems to be at the correct place, however, if the small bridges connecting the stud4 pieces would be at the level of the top of the stud, the seemingly the stud would not reach the surface. also the piece seemingly aligns on the bottom of the stud with the edge on the front at the cutout, This also seems to be impossible with stud4 reaching the bottom surface.
- I've checked the line 5 optional lines, but they seems to be along triangle edges that I've removed during cleanup, or edges that were already highlighted. How should these be handled? Currently I've removed all of them, not because dropping them for confusion, but seemingly they've seemed unnecessary.
- the slope surface has a rough surface. No idea how to add that.

All feedback greatly appreciated, so my next part could be done faster and in better quality.
Thanks,
Attila

It looks like you're using "/" instead of "\" in your subfile reference.

Hello and welcome,
I like the degree sign, but we usually don't have them in our descriptions.

The top stugs cannot be added to s01 as they get mirrored in the main file.

very nice rework, with comparable little code :-) that was fun

should be author

Release 2025-07