Official File parts/3010p28.dat
Part Attributes:
Base Part: 3010.dat
File Header:
0 Brick 1 x 4 with Red and Orange Car Taillights Pattern
0 Name: 3010p28.dat
0 Author: Bertrand Lequy [Berth]
0 !LDRAW_ORG Part UPDATE 2024-07
0 !LICENSE Licensed under CC BY 4.0 : see CAreadme.txt
0 BFC CERTIFY CCW
0 !KEYWORDS Bricklink 3010pb003, Rebrickable 3010pr9957, set 4223, set 6327
0 !KEYWORDS set 6426, set 6434, set 6549
0 !HISTORY 2024-08-26 [OrionP] Official Update 2024-07
Show contents
1 16 0 0 0 1 0 0 0 1 0 0 0 1 s\3010s01.dat
1 16 0 0 0 1 0 0 0 1 0 0 0 1 s\3010p28s01.dat
1 16 0 0 0 -1 0 0 0 1 0 0 0 1 s\3010p28s01.dat
Status:
Official
Unofficial parents
Part Events:
Archived Part Events:
I wonder if creating a subpart here is worth it. anyway the part is ready for it (after corrections if needed).
2024-05-13 16:55:18
Nice to see some more Town Junior parts!
Not really sure about this, since this is rarely been considered, but the black outlines look a bit thin.
This part usually pairs with the likes of
2513p02 (https://library.ldraw.org/official/2593)
3010p71 (https://library.ldraw.org/official/3935)
Which seem to have thicker outlines.
Not really sure about this, since this is rarely been considered, but the black outlines look a bit thin.
This part usually pairs with the likes of
2513p02 (https://library.ldraw.org/official/2593)
3010p71 (https://library.ldraw.org/official/3935)
Which seem to have thicker outlines.
I modified the left outline ( x 1.5) and kept the right to have a comparison point.
2024-05-17 16:04:26
2024-05-17 17:07:23
2024-05-18 06:53:32
* Should be subfiled and mirrored
2024-05-18 14:50:02
Yes, it's scheduled. I'm just waiting for some feedback about the black outline size change (Takeshi allready answered in PM)
2024-05-18 15:29:58
I think the thicker version is better. Might even need to be even thicker.
Or is 3010p71 too thick?
Or is 3010p71 too thick?
2024-05-19 14:34:26
I tried to make the outline thicker (x2 instead ofx1.5) and I was not convinced, it modified the orange light shape. Then LDPE crashed And I didn't have the courage to make it again for now.
2024-06-01 02:53:31
Sorry for the late reply.
The older parts use a thickness of about 1 LDU, but strangely the thickness is off by the third decimal, which I doubt the real part is supposed to be that accurate. Some images I found even have mildly varying line thickness on the same part, which I also think is not intentional.
Like Magnus said, I am also being to suspect, that the older files might have too thick of a line. Also they probably could benefit from primitives like your part does.
The older parts use a thickness of about 1 LDU, but strangely the thickness is off by the third decimal, which I doubt the real part is supposed to be that accurate. Some images I found even have mildly varying line thickness on the same part, which I also think is not intentional.
Like Magnus said, I am also being to suspect, that the older files might have too thick of a line. Also they probably could benefit from primitives like your part does.
2024-06-01 06:05:20
the third decimal may come from the transformation matrix of part s/2513p03s01
2024-06-01 10:38:39
Re-checked it, it is actually more like 0.9 LDU thickness, at least on the pattern subfile.
the right outlined has been doubled (0.8 ldu)
2024-06-02 22:40:16
I am beginning to see the issue here, the outline looks better I would say, though the orange light looks almost rectangular, which it clearly is not on the real part.
Have you tried smaller radii on the orange one?
Have you tried smaller radii on the orange one?
2024-06-03 04:54:20
no, but I guess I would have to.
the right taillight has been modified.
2024-06-04 13:33:19
Looks fine to me. Good job!
2024-06-04 17:10:58
* Pattern looks good but should be subfiled and mirrored.
2024-06-06 18:15:32
2024-06-06 18:18:07
Willy : done
2024-06-07 06:19:57
2024-06-07 14:23:14
2024-08-25 20:44:40
2024-08-26 02:10:58
Release 2024-07
Creative Commons Attribution License information
This part is copyright © Bertrand Lequy
Licensed under CC BY 4.0
Edits:
LDraw.org Parts Tracker,
Orion Pobursky,
3D View
Website copyright ©2003-2025 LDraw.org, see Legal Info for details.
LDraw is a completely unofficial, community run free CAD system which represents official parts produced by the LEGO company.
LDraw™ is a trademark owned and licensed by the Estate of James Jessiman
LEGO® is a registered trademark of the LEGO Group, which does not sponsor,
endorse, or authorize this site. Visit the official Lego website at
http://www.lego.com