Unofficial File parts/s/4744p03s01.dat
File Header:
0 ~Brick 2 x 4 x 2 with Curved Top with Face/Moustache Pattern - Half
0 Name: s\4744p03s01.dat
0 Author: Chris Böhnke [KnightOfTarenta]
0 !LDRAW_ORG Unofficial_Subpart
0 !LICENSE Licensed under CC BY 4.0 : see CAreadme.txt
0 BFC CERTIFY CCW
0 !HISTORY 2024-07-08 [KnightOfTarenta] subfiled from Chris Dee 4744p03
Show contents
0 // Eye
1 14 10.5 24.5 -20 7 0 0 0 0 -7 0 1 0 4-4ndis.dat
1 0 10.5 24.5 -20 1 0 0 0 1 0 0 0 1 s\4744p01s01.dat
1 15 10.5 24.5 -20 1 0 0 0 1 0 0 0 1 s\4744p01s02.dat
1 0 10.5 24.5 -20 1 0 0 0 1 0 0 0 1 s\4744p01s03.dat
0 // Curved Primitives
1 14 29.5 11.5 -20 -6 0 0 0 0 6 0 1 0 1-4ndis.dat
1 14 6.5 39.3 -20 -6.25 0 0 0 0 4.5 0 1 0 1-4ndis.dat
1 14 4.5 38.1 -20 -4.25 0 0 0 0 -4.5 0 1 0 1-4ndis.dat
1 14 29.5 27 -20 5 0 0 0 0 -5 0 1 0 1-4chrd.dat
1 14 29.5 27 -20 5 0 0 0 0 5 0 1 0 1-4chrd.dat
1 16 29.5 27 -20 0 0 5 -5 0 0 0 1 0 2-4ndis.dat
1 16 20 20 -20 20 0 0 0 0 -20 0 1 0 1-4chrd.dat
1 16 29.5 11.5 -20 -6 0 0 0 0 6 0 1 0 1-4chrd.dat
1 16 6.5 39.3 -20 -6.25 0 0 0 0 4.5 0 1 0 1-4chrd.dat
1 16 4.5 38.1 -20 -4.25 0 0 0 0 -4.5 0 1 0 1-4chrd.dat
0 // Colour 14 Yellow
3 14 23.5 11.5 -20 20.778 12.738 -20 23.5 17.5 -20
3 14 3.5 31.5 -20 .25 33.6 -20 4.5 33.6 -20
3 14 20.778 12.738 -20 17.877 13.486 -20 23.5 17.5 -20
3 14 8.166 43.762 -20 6.5 43.8 -20 8.732 46.437 -20
3 14 9.91 43.519 -20 8.166 43.762 -20 8.732 46.437 -20
3 14 13.252 42.346 -20 11.625 43.052 -20 13.829 45.824 -20
3 14 11.707 37.783 -20 12.745 38.096 -20 13.831 38.188 -20
3 14 5.923 15.089 -20 0 15.5 -20 3.5 17.5 -20
3 14 0 15.5 -20 3.5 24.5 -20 3.5 17.5 -20
3 14 3.5 31.5 -20 4.5 33.6 -20 5.847 33.828 -20
4 14 13.829 45.824 -20 11.625 43.052 -20 9.91 43.519 -20 8.732 46.437 -20
4 14 18.503 44.754 -20 14.741 41.388 -20 13.252 42.346 -20 13.829 45.824 -20
4 14 6.5 43.8 -20 .25 43.8 -20 0 47 -20 8.732 46.437 -20
4 14 13.831 38.188 -20 14.924 38.086 -20 15.984 37.828 -20 11.707 37.783 -20
4 14 10.5 17.5 -20 11.94 14.46 -20 5.923 15.089 -20 3.5 17.5 -20
4 14 .25 33.6 -20 3.5 31.5 -20 3.5 24.5 -20 0 15.5 -20
4 14 5.847 33.828 -20 7.5 34.491 -20 10.5 31.5 -20 3.5 31.5 -20
4 14 17.5 17.5 -20 17.5 24.5 -20 23.5 17.5 -20 17.877 13.486 -20
4 14 29.5 22 -20 29.5 17.5 -20 23.5 17.5 -20 17.5 24.5 -20
4 14 16.051 40.173 -20 14.741 41.388 -20 18.503 44.754 -20 22.472 43.283 -20
4 14 17.116 38.752 -20 16.051 40.173 -20 22.472 43.283 -20 26.107 40.889 -20
4 14 18 37 -20 17.116 38.752 -20 26.107 40.889 -20 28.219 38.372 -20
4 14 18 37 -20 28.219 38.372 -20 29.3 35.5 -20 17.5 31.5 -20
4 14 10.746 37.243 -20 11.707 37.783 -20 15.984 37.828 -20 18 37 -20
4 14 17.5 17.5 -20 17.877 13.486 -20 11.94 14.46 -20 10.5 17.5 -20
4 14 17.5 31.5 -20 29.3 35.5 -20 29.5 32 -20 17.5 24.5 -20
4 14 8.796 35.38 -20 10.746 37.243 -20 18 37 -20 17.5 31.5 -20
4 14 10.5 31.5 -20 7.5 34.491 -20 8.796 35.38 -20 17.5 31.5 -20
4 14 29.5 22 -20 17.5 24.5 -20 29.5 32 -20 34.5 27 -20
0 // Colour 16 Main Colour
3 16 28.219 38.372 -20 26.107 40.889 -20 40 48 -20
3 16 26.107 40.889 -20 22.472 43.283 -20 40 48 -20
3 16 29.3 35.5 -20 28.219 38.372 -20 40 48 -20
3 16 13.829 45.824 -20 8.732 46.437 -20 40 48 -20
3 16 18.503 44.754 -20 13.829 45.824 -20 40 48 -20
3 16 22.472 43.283 -20 18.503 44.754 -20 40 48 -20
3 16 18 37 -20 15.984 37.828 -20 17.116 38.752 -20
3 16 8.732 46.437 -20 0 47 -20 40 48 -20
3 16 40 20 -20 34.5 22 -20 34.5 27 -20
3 16 14.924 38.086 -20 13.831 38.188 -20 16.051 40.173 -20
3 16 20 0 -20 11.94 14.46 -20 17.877 13.486 -20
3 16 11.707 37.783 -20 14.741 41.388 -20 12.745 38.096 -20
4 16 34.5 27 -20 34.5 32 -20 40 48 -20 40 20 -20
4 16 29.5 17.5 -20 29.5 22 -20 34.5 22 -20 40 20 -20
4 16 17.116 38.752 -20 15.984 37.828 -20 14.924 38.086 -20 16.051 40.173 -20
4 16 20.778 12.738 -20 23.5 11.5 -20 20 0 -20 17.877 13.486 -20
4 16 29.5 32 -20 29.3 35.5 -20 40 48 -20 34.5 32 -20
4 16 13.831 38.188 -20 12.745 38.096 -20 14.741 41.388 -20 16.051 40.173 -20
4 16 20 0 -20 0 15.5 -20 5.923 15.089 -20 11.94 14.46 -20
4 16 23.5 11.5 -20 29.5 17.5 -20 40 20 -20 20 0 -20
4 16 .25 38.1 -20 .25 39.3 -20 6.5 43.8 -20 4.5 33.6 -20
4 16 5.847 33.828 -20 4.5 33.6 -20 6.5 43.8 -20 8.166 43.762 -20
4 16 7.5 34.491 -20 5.847 33.828 -20 8.166 43.762 -20 9.91 43.519 -20
4 16 8.796 35.38 -20 7.5 34.491 -20 9.91 43.519 -20 11.625 43.052 -20
4 16 10.746 37.243 -20 8.796 35.38 -20 11.625 43.052 -20 13.252 42.346 -20
4 16 11.707 37.783 -20 10.746 37.243 -20 13.252 42.346 -20 14.741 41.388 -20
Status:
Needs More Votes (CN)
This part has the following automated holds from the Parts Tracker
- No path of certified files to a certified or official parent in the parts folder
Current Votes:
| User | Vote |
|---|---|
| RainbowDolphin | Certify |
Official parents and subparts
Part Events:
2024-07-11 15:49:42
should the p48 part be in standard res or even straight without prims?
and maybe replace some disc prims with 1-4 and 2-4 chrds...
and maybe replace some disc prims with 1-4 and 2-4 chrds...
Currently not happy with either solution, but I would agree that the 48-prim isn't good.
2024-07-12 08:50:33
to make the eye accurate, some nitpicking (can it be reused?, I think there are several bricks that use this eye)
remove those, (they overlap when prim subst is done
3 15 4.5 25 -20 6.0387 28.08725 -20 6 27.5 -20
3 15 4.5 25 -20 6.15345 28.6646 -20 6.0387 28.08725 -20
4 15 6.2574 29.2426 -20 6.34245 29.22215 -20 6.15345 28.6646 -20 4.5 25 -20
and replace with
1 1 10.5 27.5 -20 -4.5 0 0 0 0 4.5 0 1 0 48\1-16tang.dat
4 16 4.5 25 -20 6.2574 29.2426 -20 6.34245 29.22215 -20 6 28.39505 -20
3 16 4.5 25 -20 6 28.39505 -20 6 27.5 -20
Improve intersection of the black areas
remove
3 15 6.34245 29.22215 -20 6.2574 29.2426 -20 6.603 29.75 -20
3 0 6.2574 29.2426 -20 5.5503 29.9497 -20 6.603 29.75 -20
3 0 6.34245 29.22215 -20 6.603 29.75 -20 10.5 32 -20
3 0 6.603 29.75 -20 5.5503 29.9497 -20 10.5 32 -20
add
3 15 6.34245 29.22215 -20 6.2574 29.2426 -20 6.42531 29.39001 -20
3 0 6.42531 29.39001 -20 6.2574 29.2426 -20 5.5503 29.9497 -20
3 0 6.34245 29.22215 -20 6.42531 29.39001 -20 10.5 32 -20
3 0 6.42531 29.39001 -20 5.5503 29.9497 -20 10.5 32 -20
remove those, (they overlap when prim subst is done
3 15 4.5 25 -20 6.0387 28.08725 -20 6 27.5 -20
3 15 4.5 25 -20 6.15345 28.6646 -20 6.0387 28.08725 -20
4 15 6.2574 29.2426 -20 6.34245 29.22215 -20 6.15345 28.6646 -20 4.5 25 -20
and replace with
1 1 10.5 27.5 -20 -4.5 0 0 0 0 4.5 0 1 0 48\1-16tang.dat
4 16 4.5 25 -20 6.2574 29.2426 -20 6.34245 29.22215 -20 6 28.39505 -20
3 16 4.5 25 -20 6 28.39505 -20 6 27.5 -20
Improve intersection of the black areas
remove
3 15 6.34245 29.22215 -20 6.2574 29.2426 -20 6.603 29.75 -20
3 0 6.2574 29.2426 -20 5.5503 29.9497 -20 6.603 29.75 -20
3 0 6.34245 29.22215 -20 6.603 29.75 -20 10.5 32 -20
3 0 6.603 29.75 -20 5.5503 29.9497 -20 10.5 32 -20
add
3 15 6.34245 29.22215 -20 6.2574 29.2426 -20 6.42531 29.39001 -20
3 0 6.42531 29.39001 -20 6.2574 29.2426 -20 5.5503 29.9497 -20
3 0 6.34245 29.22215 -20 6.42531 29.39001 -20 10.5 32 -20
3 0 6.42531 29.39001 -20 5.5503 29.9497 -20 10.5 32 -20
2024-07-12 14:06:38
https://library.ldraw.org/tracker/31336
that one is quite similar...
should there be a prim (black contour with uncolored center)?
that one is quite similar...
should there be a prim (black contour with uncolored center)?
2024-07-12 14:15:59
there are quite some around:
3664p07
3437pe1
3437pe3
3003pe1
3003pe2
3003pe3
3004p0b
3005pe1
3005pe4
3002pe2
3664p07
3437pe1
3437pe3
3003pe1
3003pe2
3003pe3
3004p0b
3005pe1
3005pe4
3002pe2
2024-07-13 23:59:18
There are quite many parts that use this "type" of pattern, some of which already got made into LDraw.
However, within LDraw, not all of those are identical, as the ratio between eye radius and line thickness isn't equal. There are also a few parts where the eye overlaps directly into neighboring patterned areas.
I would argue though, that at least for a single base part (like 4744) all prints use the same radius/thickness ratio.
However, within LDraw, not all of those are identical, as the ratio between eye radius and line thickness isn't equal. There are also a few parts where the eye overlaps directly into neighboring patterned areas.
I would argue though, that at least for a single base part (like 4744) all prints use the same radius/thickness ratio.
Sorry for the long delay, here's an updated version:
*thanks to Gerald's Suggestions the eye should now look better in all resolutions, however the high accuracy vertices are still there
*if this version is okay, I would like to subfile and mirror the eye (thus the halved prims), although I am not sure if the eye should than be 4744p03s02.dat or maybe I should rework the other 3 face bricks too (all 4 were very likely based off a single one) and then make the eye 4744p01s01.dat or something? I also plan to use this eye on a few other yet missing 4744 patterns if possible
*minor improvements on the other areas to remove a few vertices by converting discs to chords
Making the eye a primitive sounds like a good idea, but most parts have the eye intersect with other parts of the print (or have other changes like line thickness, highlights, orientation), so is a primitive for like 8-10 parts something that's even considerable?
*thanks to Gerald's Suggestions the eye should now look better in all resolutions, however the high accuracy vertices are still there
*if this version is okay, I would like to subfile and mirror the eye (thus the halved prims), although I am not sure if the eye should than be 4744p03s02.dat or maybe I should rework the other 3 face bricks too (all 4 were very likely based off a single one) and then make the eye 4744p01s01.dat or something? I also plan to use this eye on a few other yet missing 4744 patterns if possible
*minor improvements on the other areas to remove a few vertices by converting discs to chords
Making the eye a primitive sounds like a good idea, but most parts have the eye intersect with other parts of the print (or have other changes like line thickness, highlights, orientation), so is a primitive for like 8-10 parts something that's even considerable?
*Sub-filed and reworked eye.
*Moved pattern up .5 LDU to match 4744p01
I tried to replace the hair line with a 1-4 chrd+ndis, but I couldn't find a way to avoid the resulting T-junc at the connecting prim :(
1 2 0 11.5 -20 23.5 0 0 0 0 4 0 1 0 1-4chrd.dat
1 4 0 11.5 -20 23.5 0 0 0 0 4 0 1 0 1-4ndis.dat
I tried to replace the hair line with a 1-4 chrd+ndis, but I couldn't find a way to avoid the resulting T-junc at the connecting prim :(
1 2 0 11.5 -20 23.5 0 0 0 0 4 0 1 0 1-4chrd.dat
1 4 0 11.5 -20 23.5 0 0 0 0 4 0 1 0 1-4ndis.dat
2025-08-13 02:05:13
Creative Commons Attribution License information
This part is copyright © Chris Böhnke
Licensed under CC BY 4.0
Edits:
LDraw.org Parts Tracker,
3D View
Website copyright ©2003-2025 LDraw.org, see Legal Info for details.
LDraw is a completely unofficial, community run free CAD system which represents official parts produced by the LEGO company.
LDraw™ is a trademark owned and licensed by the Estate of James Jessiman
LEGO® is a registered trademark of the LEGO Group, which does not sponsor,
endorse, or authorize this site. Visit the official Lego website at
http://www.lego.com
*updated eyes with prims
The suggested 2x2 bricks had a very high accuracy (>4 decimals) to match the 48-prims. Unificator wont let it pass otherwise. I guess this ok?