Unofficial File parts/s/41770s01.dat
File Header:
0 ~Wing 2 x 4 Left without Studs
0 Name: s\41770s01.dat
0 Author: Takeshi Takahashi [RainbowDolphin]
0 !LDRAW_ORG Unofficial_Subpart
0 !LICENSE Licensed under CC BY 4.0 : see CAreadme.txt
0 BFC CERTIFY CCW
0 !HISTORY 2004-11-06 [PTadmin] Official Update 2004-04
0 !HISTORY 2007-09-05 [PTadmin] Header formatted for Contributor Agreement
0 !HISTORY 2008-07-01 [PTadmin] Official Update 2008-01
0 !HISTORY 2024-08-13 [RainbowDolphin] Total rewrite, original by Guy Vivan [guyvivan]
0 !HISTORY 2025-09-07 [MagFors] added chamfered corner
Show contents
1 16 0 4 20 -1 0 0 0 -1 0 0 0 1 stud4.dat
0 // End stud tube and lip
1 16 0 4 -20 0 0 -1 0 -1 0 1 0 0 1-4stud4.dat
1 16 0 4 -20 -1 0 0 0 -1 0 0 0 -1 3-16stud4.dat
0 BFC INVERTNEXT
1 16 0 8 -20 0 0 6 0 -4 0 6 0 0 1-16cylo.dat
1 16 0 8 -20 0 0 6 0 -1 0 6 0 0 1-16tndis.dat
1 16 0 8 -20 0 0 8 0 -4 0 8 0 0 1-8cylo.dat
1 16 0 8 -20 0 0 8 0 -1 0 8 0 0 1-8chrd.dat
0 // Centre stud tube and lip
1 16 0 4 0 0 0 -1 0 -1 0 1 0 0 2-4stud4.dat
1 16 0 4 0 0 0 1 0 -1 0 1 0 0 1-8stud4.dat
1 16 0 4 0 0 0 1 0 -1 0 -1 0 0 1-8stud4.dat
1 16 0 8 0 6 0 0 0 -1 0 0 0 -6 1-8tndis.dat
1 16 0 8 0 6 0 0 0 -1 0 0 0 6 1-8tndis.dat
0 BFC INVERTNEXT
1 16 0 8 0 6 0 0 0 -4 0 0 0 -6 1-8cylo.dat
0 BFC INVERTNEXT
1 16 0 8 0 6 0 0 0 -4 0 0 0 6 1-8cylo.dat
2 24 5.6568 8 -5.6568 6.956 8 -3.714
2 24 6.235 8 4.791 5.6568 8 5.6568
2 24 5.6568 4 -5.6568 6.956 4 -3.714
2 24 6.235 4 4.791 5.6568 4 5.6568
4 16 6.956 8 -3.714 6.956 4 -3.714 5.656 4 -5.656 5.6568 8 -5.6568
4 16 6.235 8 4.791 5.6568 8 5.6568 5.656 4 5.656 6.235 4 4.791
4 16 6.235 8 4.791 6 8 4.2426 4.2426 8 4.2426 5.6568 8 5.6568
3 16 6 8 0 6.956 8 -3.714 6 8 -4.2426
3 16 6 8 -4.2426 6.956 8 -3.714 5.6568 8 -5.6568
3 16 6 8 -4.2426 5.6568 8 -5.6568 4.2426 8 -4.2426
3 16 -20 0 40 -20 0 -40 0 0 -40
4 16 19.25 0 40 -20 0 40 0 0 -40 19.25 0 37
2 24 19.25 0 37 0 0 -40
2 24 19.25 0 40 19.25 0 37
1 16 -10 4 -40 0 0 10 4 0 0 0 1 0 rect3.dat
1 16 -.375 4 40 0 0 19.625 -4 0 0 0 -1 0 rect3.dat
1 16 -20 4 0 0 1 0 -4 0 0 0 0 40 rect.dat
1 16 -16 6 0 0 -1 0 2 0 0 0 0 36 rect.dat
4 16 19.25 8 40 19.25 0 40 19.25 0 37 19.25 8 37
4 16 19.25 0 37 18.27 4 33.06 18.27 8 33.06 19.25 8 37
2 24 18.27 4 33.06 18.27 8 33.06
2 24 19.25 8 37 19.25 8 40
2 24 18.27 8 33.06 19.25 8 37
2 24 15.86 4 23.423 18.27 4 33.06
4 16 13.81 8 15.25 15.86 8 23.423 15.86 4 23.423 13.81 4 15.25
2 24 13.81 8 15.25 15.86 8 23.423
2 24 15.86 8 23.423 15.86 4 23.423
2 24 13.81 4 15.25 13.81 8 15.25
2 24 10.91 4 3.62 13.81 4 15.25
4 16 8.95 8 -4.21 10.91 8 3.62 10.91 4 3.62 8.95 4 -4.21
2 24 8.95 8 -4.21 10.91 8 3.62
2 24 10.91 8 3.62 10.91 4 3.62
2 24 8.95 4 -4.21 8.95 8 -4.21
2 24 6.25 4 -14.99 8.95 4 -4.21
4 16 8.95 4 -4.21 10.91 4 3.62 19.25 0 37 0 0 -40
3 16 10.91 4 3.62 13.81 4 15.25 19.25 0 37
3 16 19.25 0 37 15.86 4 23.423 18.27 4 33.06
3 16 19.25 0 37 13.81 4 15.25 15.86 4 23.423
3 16 0 0 -40 6.25 4 -14.99 8.95 4 -4.21
4 16 0 8 -40 6.25 8 -14.99 6.25 4 -14.99 0 0 -40
2 24 0 8 -40 6.25 8 -14.99
2 24 6.25 8 -14.99 6.25 4 -14.99
4 16 8.95 4 -4.21 6.956 4 -3.714 6.956 8 -3.714 8.95 8 -4.21
2 24 8.95 4 -4.21 6.956 4 -3.714
2 24 6.956 4 -3.714 6.956 8 -3.714
2 24 6.956 8 -3.714 8.95 8 -4.21
4 16 6.956 8 -3.714 6 8 0 10.91 8 3.62 8.95 8 -4.21
4 16 6.235 8 4.791 10.91 8 3.62 6 8 0 6 8 4.2426
2 24 6.235 4 4.791 6.235 8 4.791
4 16 10.91 8 3.62 6.235 8 4.791 6.235 4 4.791 10.91 4 3.62
2 24 10.91 8 3.62 6.235 8 4.791
2 24 6.235 4 4.791 10.91 4 3.62
4 16 18.27 4 33.06 14.38 4 34.03 14.38 8 34.03 18.27 8 33.06
2 24 18.27 4 33.06 14.38 4 34.03
2 24 14.38 4 34.03 14.38 8 34.03
2 24 14.38 8 34.03 18.27 8 33.06
4 16 14.88 4 36 14.88 8 36 14.38 8 34.03 14.38 4 34.03
2 24 14.88 4 36 14.88 8 36
2 24 14.88 8 36 14.38 8 34.03
2 24 14.38 4 34.03 14.88 4 36
4 16 14.88 8 36 14.88 4 36 -16 4 36 -16 8 36
2 24 14.88 4 36 -16 4 36
2 24 -16 8 36 14.88 8 36
3 16 -16 4 36 14.88 4 36 14.38 4 34.03
4 16 -3.123 8 -36 -16 8 -36 -16 4 -36 -3.123 4 -36
2 24 -3.123 8 -36 -16 8 -36
2 24 -16 4 -36 -3.123 4 -36
2 24 -3.123 4 -36 -3.123 8 -36
4 16 -3.123 4 -36 -1.103 4 -27.92 -1.103 8 -27.92 -3.123 8 -36
2 24 -3.123 4 -36 -1.103 4 -27.92
2 24 -1.103 4 -27.92 -1.103 8 -27.92
2 24 -1.103 8 -27.92 -3.123 8 -36
4 16 -3.064 4 -27.392 -3.064 8 -27.392 -1.103 8 -27.92 -1.103 4 -27.92
2 24 -3.064 8 -27.392 -1.103 8 -27.92
2 24 -1.103 4 -27.92 -3.064 4 -27.392
5 24 5.656 4 -14.344 5.656 8 -14.344 3.0616 8 -12.6088 6.25 4 -14.99
4 16 5.656 4 -14.344 6.25 4 -14.99 6.25 8 -14.99 5.656 8 -14.344
2 24 5.656 4 -14.344 6.25 4 -14.99
2 24 6.25 8 -14.99 5.656 8 -14.344
2 24 9.93 4 16.22 13.81 4 15.25
4 16 13.81 4 15.25 10.91 4 3.62 6.235 4 4.791 9.93 4 16.22
4 16 11.98 4 24.393 9.93 4 16.22 6.235 4 4.791 -16 4 36
3 16 -16 4 36 14.38 4 34.03 11.98 4 24.393
2 24 11.98 4 24.393 9.93 4 16.22
4 16 15.86 4 23.423 11.98 4 24.393 14.38 4 34.03 18.27 4 33.06
2 24 15.86 4 23.423 11.98 4 24.393
4 16 15.86 8 23.423 13.81 8 15.25 9.93 8 16.22 11.98 8 24.393
2 24 13.81 8 15.25 9.93 8 16.22
2 24 9.93 8 16.22 11.98 8 24.393
2 24 11.98 8 24.393 15.86 8 23.423
4 16 11.98 4 24.393 15.86 4 23.423 15.86 8 23.423 11.98 8 24.393
2 24 11.98 8 24.393 11.98 4 24.393
4 16 13.81 8 15.25 13.81 4 15.25 9.93 4 16.22 9.93 8 16.22
2 24 9.93 4 16.22 9.93 8 16.22
4 16 9.93 4 16.22 11.98 4 24.393 11.98 8 24.393 9.93 8 16.22
4 16 -1.103 8 -27.92 -3.064 8 -27.392 -2.298 8 -25.544 -.594 8 -25.88
2 24 -2.298 8 -25.544 -.594 8 -25.88
2 24 -.594 8 -25.88 2.2962 8 -14.4566
3 16 0 8 -40 -3.123 8 -36 -1.103 8 -27.92
4 16 0 8 -40 -20 8 -40 -16 8 -36 -3.123 8 -36
4 16 6.25 8 -14.99 0 8 -40 -1.103 8 -27.92 -.594 8 -25.88
4 16 -20 8 40 -16 8 36 -16 8 -36 -20 8 -40
4 16 -20 8 40 19.25 8 40 14.88 8 36 -16 8 36
4 16 14.38 8 34.03 14.88 8 36 19.25 8 37 18.27 8 33.06
3 16 14.88 8 36 19.25 8 40 19.25 8 37
4 16 -2.298 8 -25.544 -2.298 4 -25.544 -.594 4 -25.88 -.594 8 -25.88
2 24 -2.298 4 -25.544 -.594 4 -25.88
2 24 -.594 4 -25.88 -.594 8 -25.88
2 24 2.2962 4 -14.4566 -.594 4 -25.88
2 24 2.2962 8 -14.4566 2.2962 4 -14.4566
4 16 2.2962 8 -14.4566 -.594 8 -25.88 -.594 4 -25.88 2.2962 4 -14.4566
4 16 5.656 8 -14.344 6.25 8 -14.99 -.594 8 -25.88 2.2962 8 -14.4566
3 16 -3.123 4 -36 -16 4 -36 2.2962 4 -14.4566
3 16 2.2962 4 -14.4566 -.594 4 -25.88 -3.123 4 -36
4 16 -16 4 36 6.235 4 4.791 2.2962 4 -14.4566 -16 4 -36
3 16 6.235 4 4.791 6.956 4 -3.714 2.2962 4 -14.4566
4 16 8.95 4 -4.21 6.25 4 -14.99 2.2962 4 -14.4566 6.956 4 -3.714
3 16 5.656 8 -14.344 2.2962 8 -14.4566 2.2962 8 -14
3 16 5.656 8 -14.344 2.2962 8 -14 0 8 -12
3 16 0 8 -12 2.2962 8 -14 0 8 -14
2 24 19.25 0 37 19.25 8 37
Status:
Needs More Votes (F)
Current Votes:
None
Official parents and subparts
Part Events:
Archived Part Events:
None
CC-BY-4 rewrite, optimizing circular prims, eliminating T-junctions
2024-08-13 14:53:06
Is there a reason for having this part, on this list?
https://library.ldraw.org/tracker/summary/6
Is something missing?
https://library.ldraw.org/tracker/summary/6
Is something missing?
2024-08-13 15:08:57
I've missed the list, but this is near the top of the CC-BY-4 blocker
https://forums.ldraw.org/thread-28321-post-54467.html#pid54467
https://forums.ldraw.org/thread-28321-post-54467.html#pid54467
Overlapping surfaces:
3 16 -3.0616 4 -27.3912 0 4 -28 -8 4 -28
4 16 -8 4 -28 -1.103 4 -27.92 -3.123 4 -36 -16 4 -36
Could use stud4 section prims.
"Roof" surface could be simplified.
3 16 -3.0616 4 -27.3912 0 4 -28 -8 4 -28
4 16 -8 4 -28 -1.103 4 -27.92 -3.123 4 -36 -16 4 -36
Could use stud4 section prims.
"Roof" surface could be simplified.
2025-04-27 18:25:23
2025-04-27 18:34:34
Header Edits
description:
~Wing 2 x 4 Left without studs
to
~Wing 2 x 4 Left without Studs
Why use ndises, discs, and chords for two of the antistuds, but not the third? It would be much simpler to just skip the ndises, discs, and chords and have a complete surface underneath the antistuds. This would also eliminate the need for the 1-16chord.
Replace the 2-4 cyl and two 1-8 cyl on the middle antistud with two 3-8 cyl.
Change cyli+edges to cylo.
The smallest antistud can be made from rotated 2-4 prims.
Replace the 2-4 cyl and two 1-8 cyl on the middle antistud with two 3-8 cyl.
Change cyli+edges to cylo.
The smallest antistud can be made from rotated 2-4 prims.
2025-08-19 00:28:00
Since this is an official file fix, may I make the edits I suggested?
2025-08-19 01:04:32
I think the point is that partial understuds should be cutout like the sides... (the full one can be changed/swapped easily, the partial ones have to stay)
could even use 1-8tndis for the bases of the 1-8stud4.dat and replace the 1-8ring at the smallest one with a 1-8chrd
could even use 1-8tndis for the bases of the 1-8stud4.dat and replace the 1-8ring at the smallest one with a 1-8chrd
2025-09-09 16:11:00
2025-09-18 20:19:22
The 'chamfered' corner wasn't there in 2019, but it is there now in 2025. Is the policy to model the latest version of a part?
2025-09-18 20:24:25
I agree, we might need to split this into a- and b-versions.
Creative Commons Attribution License information
This part is copyright © Takeshi Takahashi
Licensed under CC BY 4.0
Edits:
LDraw.org Parts Tracker,
Magnus Forsberg,
3D View
Website copyright ©2003-2025 LDraw.org, see Legal Info for details.
LDraw is a completely unofficial, community run free CAD system which represents official parts produced by the LEGO company.
LDraw™ is a trademark owned and licensed by the Estate of James Jessiman
LEGO® is a registered trademark of the LEGO Group, which does not sponsor,
endorse, or authorize this site. Visit the official Lego website at
http://www.lego.com