Unofficial File parts/s/64683s02.dat
File Header:
0 ~Technic Panel Fairing Smooth End without Side Faces
0 Name: s\64683s02.dat
0 Author: Jens Brühl [jb70]
0 !LDRAW_ORG Unofficial_Subpart
0 !LICENSE Licensed under CC BY 4.0 : see CAreadme.txt
0 BFC CERTIFY CCW
0 !HISTORY 2024-10-20 [jb70] subfiled from s\64683s01.dat by [Philo]
0 !HISTORY 2024-10-20 [jb70] flattened primitives
Show contents
1 16 0 0 -10 9 0 0 0 0 9 0 41 0 1-4cyli.dat
0 BFC INVERTNEXT
1 16 0 0 10 7 0 0 0 0 7 0 21 0 1-4cyli.dat
1 16 0 0 31 7 0 0 0 0 7 0 1 0 1-4edge.dat
1 16 0 0 31 7 0 0 0 0 7 0 1 0 1-4disc.dat
1 16 -20 0 -10 0 0 -9 9 0 0 0 18 0 1-4cylo.dat
1 16 -20 -40 -10 -9 0 0 0 0 -9 0 18 0 3-8cyli.dat
1 16 -20 -40 8 0 0 9 -9 0 0 0 12 0 1-8cyli.dat
1 16 -20 -40 -10 -9 0 0 0 0 -9 0 1 0 3-8edge.dat
1 16 -20 -40 8 -9 0 0 0 0 -9 0 1 0 1-4edge.dat
1 16 -20 -20 10 0 0 1 -1 0 0 0 -1 0 peghole4.dat
1 16 -68.259 0 -10 77.259 0 0 0 0 -65.577 0 -1 0 48\1-8edge.dat
1 16 0 0 -10 -1 0 0 0 0 1 0 1 0 peghole.dat
0 BFC INVERTNEXT
1 16 0 0 -8 -6 0 0 0 0 6 0 16 0 4-4cyli.dat
0 BFC INVERTNEXT
1 16 0 0 8 0 0 7 7 0 0 0 2 0 2-4cyli.dat
1 16 0 0 8 0 0 7 7 0 0 0 1 0 2-4edge.dat
0 BFC INVERTNEXT
1 16 -20 -40 8 0 0 7 7 0 0 0 2 0 1-4cyli.dat
0 BFC INVERTNEXT
1 16 -20 -40 8 7 0 0 0 0 -7 0 4 0 1-4cyli.dat
0 BFC INVERTNEXT
1 16 -20 -40 12 7 0 0 0 0 -7 0 3 0 1-4cyls.dat
1 16 -20 -40 8 0 0 7 7 0 0 0 1 0 2-4edge.dat
1 16 -20 -40 10 0 0 7 7 0 0 0 1 0 1-4edge.dat
1 16 -20 -40 8 -6 0 0 0 0 6 0 -1 0 1-4ndis.dat
4 16 -29 -40 8 -26 -40 8 -26 -34 8 -29 -33 8
4 16 -29 -33 8 -26 -34 8 -20 -34 8 -20 -33 8
2 24 -29 -40 8 -29 -33 8
1 16 0 0 8 0 0 -6 -6 0 0 0 -1 0 2-4ndis.dat
1 16 0 0 10 7 0 0 0 0 -7 0 -1 0 1-4ndis.dat
1 16 -20 -20 10 0 0 8 8 0 0 0 -1 0 2-4ndis.dat
1 16 -20 -40 10 0 0 7 7 0 0 0 -1 0 1-4ndis.dat
1 16 -20 0 8 0 0 6 6 0 0 0 -1 0 3-4ndis.dat
1 16 0 0 8 0 0 1 1 0 0 0 -1 0 2-4ring6.dat
4 16 0 -7 8 0 -6 8 -6 -6 8 -7 -7 8
4 16 -7 -7 8 -14 -6 8 -26 -6 8 -29 -8 8
4 16 -6 6 8 0 6 8 0 7 8 -7 7 8
4 16 -7 -7 8 -6 -6 8 -6 6 8 -7 7 8
4 16 -7 -7 8 -7 7 8 -14 6 8 -14 -6 8
5 24 -7 -7 10 -7 -7 8 -29 -8 10 0 -7 10
1 16 -20 -40 8 0 0 1 1 0 0 0 -1 0 2-4ring6.dat
1 16 -20 0 8 -3 0 0 0 0 3 0 -1 0 1-4ring2.dat
1 16 -20 -40 8 0 0 -3 -3 0 0 0 -1 0 1-4ring2.dat
1 16 0 0 10 7 0 0 0 0 -7 0 1 0 1-4edge.dat
1 16 0 0 8 -6 0 0 0 0 6 0 1 0 4-4edge.dat
1 16 0 0 -10 9 0 0 0 0 9 0 1 0 1-4edge.dat
1 16 0 0 -10 1 0 0 0 0 1 0 1 0 7-8ring8.dat
1 16 0 0 -10 8 0 0 0 0 -8 0 1 0 1-8tndis.dat
4 16 8.33557 -8.5578 -10 8 -5.6568 -10 8 0 -10 9 0 -10
3 16 8 -5.6568 -10 6.363 -6.363 -10 5.6568 -5.6568 -10
3 16 6.363 -6.363 -10 8 -5.6568 -10 8.33557 -8.5578 -10
4 16 6.363 -6.363 -10 8.33557 -8.5578 -10 6.36547 -16.97133 -10 4.365 -15.9715 -10
4 16 1.121 -24.0965 -10 4.365 -15.9715 -10 6.36547 -16.97133 -10 3.12059 -25.09632 -10
4 16 -3.3535 -31.788 -10 -1.35271 -32.7885 -10 -6.96171 -39.92328 -10 -8.0005 -37 -10
4 16 -3.3535 -31.788 -10 1.121 -24.0965 -10 3.12059 -25.09632 -10 -1.35271 -32.7885 -10
3 16 -13.62916 -46.3695 -10 -8.0005 -37 -10 -6.96171 -39.92328 -10
1 16 -20 0 -10 0 0 -1 -1 0 0 0 1 0 peghole.dat
0 BFC INVERTNEXT
1 16 -20 0 -8 0 0 -6 -6 0 0 0 16 0 4-4cyli.dat
1 16 -20 0 8 0 0 -6 -6 0 0 0 1 0 4-4edge.dat
1 16 -20 0 -10 0 0 -1 -1 0 0 0 1 0 4-4ring8.dat
4 16 -13.62916 -46.3695 -10 -13.6361 -46.3639 -10 -14.3432 -45.6568 -10 -13.2176 -44.532 -10
4 16 -8.0005 -37 -10 -13.62916 -46.3695 -10 -13.2176 -44.532 -10 -12.6088 -43.0616 -10
1 16 -20 -20 -10 0 0 -1 -1 0 0 0 1 0 peghole.dat
0 BFC INVERTNEXT
1 16 -20 -20 -8 0 0 -6 -6 0 0 0 16 0 4-4cyli.dat
1 16 -20 -30 -10 -1 0 0 0 0 1 0 16 0 npeghol2.dat
1 16 -20 0 -10 0 0 1 1 0 0 0 16 0 npeghol6a.dat
1 16 -20 0 -10 0 0 1 -1 0 0 0 16 0 npeghol6d.dat
1 16 -10 0 -10 0 0 1 1 0 0 0 16 0 npeghol7a.dat
4 16 -10 -6.3639 -10 -10 -9 -10 -11 -9 -10 -13.6361 -6.3639 -10
1 16 -20 -20 -10 0 0 -1 -1 0 0 0 1 0 4-4ring8.dat
1 16 -20 -40 -10 0 0 -1 -1 0 0 0 1 0 peghole.dat
0 BFC INVERTNEXT
1 16 -20 -40 -8 0 0 -6 -6 0 0 0 16 0 4-4cyli.dat
1 16 -20 -40 8 0 0 -6 -6 0 0 0 1 0 4-4edge.dat
1 16 -20 -40 -10 1 0 0 0 0 1 0 1 0 7-8ring8.dat
1 16 -20 -40 -10 8 0 0 0 0 -8 0 1 0 1-8tang.dat
3 16 -12 -41.5912 -10 -12 -40 -10 -11 -40 -10
1 16 -20 0 -10 -1 0 0 0 0 -1 0 16 0 npeghol6a.dat
1 16 -20 0 -10 1 0 0 0 0 -1 0 16 0 npeghol6d.dat
4 16 -11 -40 -10 -8.0005 -37 -10 -12.6088 -43.0616 -10 -12 -41.5912 -10
1 16 -20 -10 -10 -1 0 0 0 0 -1 0 16 0 npeghol7a.dat
1 16 -20 -40 20 0 1 0 -1 0 0 0 0 1 connhole.dat
4 16 -13.6361 -6.3639 -10 -11 -9 -10 -11 -10 -10 -13.6361 -10 -10
1 16 -30 -40 20 0 19 0 0 0 -9 9 0 0 2-4cyli.dat
1 16 -11 -40 20 0 1 0 -9 0 0 0 0 -9 3-16cyli.dat
1 16 -11 -40 20 0 1 0 -9 0 0 0 0 9 3-16cyli.dat
3 16 -10 -43.4443 11.6849 -10.604 -43.444 11.685 -10 -42.861 11.569
3 16 -10.604 -43.444 28.315 -10 -43.4443 28.3151 -10 -42.861 28.431
1 16 -30 -40 20 0 19 0 0 0 9 -9 0 0 2-4cyli.dat
1 16 -11 -40 20 0 2 0 0 0 12 -12 0 0 2-4cyli.dat
1 16 -11 -40 20 0 1 0 0 0 12 -12 0 0 2-4edge.dat
1 16 -11 -40 20 0 1 0 0 0 9 -9 0 0 2-4edge.dat
1 16 -11 -40 20 0 1 0 0 0 3 -3 0 0 2-4ring3.dat
1 16 -12 -40 10.5 0 0 -1 0 -1 0 -.5 0 0 rect.dat
1 16 -9 -40 20 0 9 0 -12 0 0 0 0 -12 1-4cyls2.dat
1 16 -9 -40 20 0 9 0 -12 0 0 0 0 12 1-4cyls2.dat
1 16 -30 -40 20 0 1 0 0 0 -9 9 0 0 4-4edge.dat
2 24 -20 9 10 -3 9 10
1 16 0 0 -10 0 0 9 -9 0 0 0 16 0 1-8cylo.dat
4 16 1.121 -24.096 6 3.444 -8.315 6 6.364 -6.364 6 4.365 -15.971 6
4 16 -3.353 -31.788 6 0 -9 6 3.444 -8.315 6 1.121 -24.096 6
4 16 -8 -37 6 -11 -9 6 0 -9 6 -3.353 -31.788 6
3 16 -11 -40 6 -11 -9 6 -8 -37 6
1 16 5.364 -11.167 -2 0 0 .999 0 -1 4.804 8 0 0 rect3.dat
1 16 2.743 -20.034 -2 -1.622 0 0 -4.0625 -1 0 0 0 8 rect2p.dat
1 16 -1.116 -27.942 -2 -2.237 0 0 -3.846 -1 0 0 0 8 rect2p.dat
1 16 -5.677 -34.394 -2 -2.3235 0 0 -2.606 -1 0 0 0 8 rect2p.dat
1 16 -9.5 -38.5 -2 0 0 -1.5 0 -1 -1.5 -8 0 0 rect3.dat
1 16 -11 -24.5 -2 0 -1 0 0 0 15.5 -8 0 0 rect3.dat
1 16 -29 -20 -1 0 1 0 0 0 -20 -9 0 0 rect1.dat
1 16 -10 9 0 0 0 -10 0 -1 0 -10 0 0 rect1.dat
1 16 -5.5 -9 -2 5.5 0 0 0 1 0 0 0 8 rect2p.dat
5 24 4.365 -15.971 -10 4.365 -15.971 6 1.121 -24.096 -10 6.363 -6.363 -10
5 24 1.121 -24.096 -10 1.121 -24.096 6 -3.353 -31.788 -10 4.365 -15.971 -10
5 24 -3.353 -31.788 -10 -3.353 -31.788 6 -8 -37 -10 1.121 -24.096 -10
5 24 -8 -37 -10 -8 -37 6 -11 -40 -10 -3.353 -31.788 -10
1 16 0 10 40 0 0 9 0 -1 0 -9 0 0 1-4cyli.dat
1 16 0 9 40 0 0 9 0 -9 0 -9 0 0 1-4cyls.dat
1 16 0 10 40 9 0 0 0 -1 0 0 0 -9 2-4edge.dat
0 BFC INVERTNEXT
1 16 -3 9 13 3 0 0 0 -2 0 0 0 -3 1-4cylo.dat
1 16 -3 9 13 3 0 0 0 -1 0 0 0 -3 1-4ndis.dat
1 16 -3 7 13 3 0 0 0 1 0 0 0 -3 1-4ndis.dat
1 16 0 0 31 0 0 9 9 0 0 0 9 0 1-4cyls.dat
1 16 0 0 40 9 0 0 0 0 9 0 1 -9 1-4edge.dat
2 24 -20 -47 14.588 -20 -47 8
2 24 -20 -49 20 -20 -49 8
2 24 -20 -47 8 -20 -49 8
2 24 -29 -8 8 -29 0 8
4 16 -7 7 8 -20 8 8 -20 6 8 -14 6 8
4 16 -7 9 10 -20 9 10 -20 8 10 -7 7 10
1 16 -5 8 10 0 0 2 -1 0 0 0 -1 0 rect1.dat
1 16 -13.5 7.5 9 0 0 -6.5 0 1 .5 1 0 0 rect3.dat
1 16 -18 -7.5 9 0 0 -11 0 -1 -.5 -1 0 0 rect3.dat
1 16 -29 -10 9 0 1 0 0 0 2 1 0 0 rect1.dat
1 16 0 8 22 0 1 0 1 0 0 0 0 9 rect3.dat
1 16 -29 -30.5 9 0 1 0 -2.5 0 0 0 0 1 rect2a.dat
1 16 -24.5 -33 9 4.5 0 0 0 1 0 0 0 1 rect2p.dat
4 16 -20 -49 20 -20 -47 14.588 -20 -47 8 -20 -49 8
1 16 -3.5 7 9 0 0 3.5 0 1 0 -1 0 0 rect1.dat
1 16 -3.5 -7 9 3.5 0 0 0 -1 0 0 0 -1 rect2p.dat
1 16 -20 8.5 9 0 1 0 0 0 .5 1 0 0 rect3.dat
4 16 -29 -12 10 -12 -12 10 -7 -7 10 -29 -8 10
4 16 7 -7 10 -7 -7 10 -12 -12 10 2 -23 10
4 16 2 -23 10 -12 -12 10 -12 -28 10 -4 -33 10
4 16 -4 -33 10 -12 -28 10 -13 -33 10 -13 -44 10
4 16 -26 -6 8 -26 0 8 -29 0 8 -29 -8 8
4 16 -13 -33 10 -12 -28 10 -29 -28 10 -29 -33 10
2 24 -17.166 -46.364 13.636 -17.321 -46.467 13.791
2 24 -20 -47 14.588 -17.321 -46.467 13.791
2 24 -15.05 -44.95 12.691 -14.044 -43.444 11.685
2 24 -17.166 -46.364 13.636 -15.05 -44.95 12.691
2 24 -13.533 -42.679 11.533 -13 -40 11
2 24 -14.044 -43.444 11.685 -13.533 -42.679 11.533
2 24 -20 -48.315 16.556 -20 -49 20
2 24 -20 -47 14.588 -20 -48.315 16.556
5 24 -13.62916 -46.3695 10 -13.6361 -46.3639 13.6361 -21.224 -52.029 9 -6.962 -39.923 9
3 16 -10 -42.861 10 -10 -42.861 11.569 -10.604 -43.444 11.685
4 16 -10 -42.861 10 -10.604 -43.444 11.685 -13.6361 -46.3639 13.6361 -13.62916 -46.3695 10
2 24 -13.6361 -46.3639 13.6361 -10.604 -43.444 11.685
2 24 -10.604 -43.444 11.685 -10 -42.861 11.569
1 16 -20 -40 20 0 -1 9 -9 0 0 0 0 -9 1-8edge.dat
1 16 -10 -40 20 0 1 0 0 0 10 -10 0 0 2-4edge.dat
1 16 -10 -40 20 0 -1 0 0 0 1 -1 0 0 2-4ring9.dat
1 16 -10 -40 20 0 1 0 -3.4442 0 -8.3149 8.3149 0 -3.4442 3-8edge.dat
2 24 -10 -42.861 10 -10 -42.861 11.569
2 24 -10 -42.861 10 -10 -40 10
2 24 -10 -42.861 11.569 -10 -43.444 11.685
4 16 -10 -40 10 -10 -40 11 -10 -42.861 11.569 -10 -42.861 10
2 24 -10 -42.861 30 -10 -42.861 28.431
2 24 -10 -42.861 30 -10 -40 30
2 24 -10 -42.861 28.431 -10 -43.444 28.315
4 16 -10 -42.861 30 -10 -42.861 28.431 -10 -40 29 -10 -40 30
3 16 -7.041 -40 10 -10 -40 10 -10 -42.861 10
4 16 -6.962 -39.923 10.015 -4.013 -36.173 10.761 -10 -36.173 10.761 -10 -40 10
3 16 -10 -40 10 -7.041 -40 10 -6.962 -39.923 10.015
4 16 -4.013 -36.173 10.761 -1.463 -32.929 12.929 -10 -32.929 12.929 -10 -36.173 10.761
4 16 -1.353 -32.789 13.139 -.174 -30.761 16.173 -10 -30.761 16.173 -10 -32.929 12.929
3 16 -10 -32.929 12.929 -1.463 -32.929 12.929 -1.353 -32.789 13.139
4 16 -.174 -30.761 16.173 .269 -30 20 -10 -30 20 -10 -30.761 16.173
3 16 -10 -42.861 30 -10 -40 30 -7.041 -40 30
4 16 -10 -40 30 -10 -36.173 29.239 -4.013 -36.173 29.239 -6.962 -39.923 29.985
3 16 -6.962 -39.923 29.985 -7.041 -40 30 -10 -40 30
4 16 -10 -36.173 29.239 -10 -32.929 27.071 -1.463 -32.929 27.071 -4.013 -36.173 29.239
4 16 -10 -32.929 27.071 -10 -30.761 23.827 -.174 -30.761 23.827 -1.353 -32.789 26.861
3 16 -1.353 -32.789 26.861 -1.463 -32.929 27.071 -10 -32.929 27.071
4 16 -10 -30.761 23.827 -10 -30 20 .269 -30 20 -.174 -30.761 23.827
5 24 -7.041 -40 10 -10 -40 10 -10 -42.861 10 -6.962 -39.923 10.015
5 24 -4.013 -36.173 10.761 -10 -36.173 10.761 -6.962 -39.923 10.015 -1.463 -32.929 12.929
5 24 -1.463 -32.929 12.929 -10 -32.929 12.929 -4.013 -36.173 10.761 -1.353 -32.789 13.139
5 24 -.174 -30.761 16.173 -10 -30.761 16.173 -1.353 -32.789 13.139 .269 -30 20
5 24 .269 -30 20 -10 -30 20 -.174 -30.761 16.173 -10 -30.761 23.827
5 24 -10 -40 30 -7.041 -40 30 -10 -42.861 30 -6.962 -39.923 29.985
5 24 -10 -36.173 29.239 -4.013 -36.173 29.239 -10 -40 30 -10 -32.929 27.071
5 24 -10 -32.929 27.071 -1.463 -32.929 27.071 -10 -36.173 29.239 -1.353 -32.789 26.861
5 24 -10 -30.761 23.827 -.174 -30.761 23.827 -10 -32.929 27.071 -10 -30 20
2 24 -10 -42.861 10 -7.041 -40 10
2 24 -6.962 -39.923 10.015 -4.013 -36.173 10.761
2 24 -7.041 -40 10 -6.962 -39.923 10.015
2 24 -4.013 -36.173 10.761 -1.463 -32.929 12.929
2 24 -1.353 -32.789 13.139 -.174 -30.761 16.173
2 24 -1.463 -32.929 12.929 -1.353 -32.789 13.139
2 24 -.174 -30.761 16.173 .269 -30 20
5 24 3.121 -25.096 10 3.121 -25.096 20 -1.353 -32.789 10 6.365 -16.971 10
5 24 -1.353 -32.789 10 -1.353 -32.789 13.139 -6.962 -39.923 10 3.121 -25.096 10
5 24 -6.962 -39.923 10 -6.962 -39.923 10.015 -13.62916 -46.3695 10 -1.353 -32.789 10
3 16 -6.962 -39.923 10.015 -7.041 -40 10 -6.962 -39.923 10
2 24 -10 -42.861 30 -7.041 -40 30
2 24 -6.962 -39.923 29.985 -4.013 -36.173 29.239
2 24 -7.041 -40 30 -6.962 -39.923 29.985
2 24 -4.013 -36.173 29.239 -1.463 -32.929 27.071
2 24 -1.353 -32.789 26.861 -.174 -30.761 23.827
2 24 -1.463 -32.929 27.071 -1.353 -32.789 26.861
2 24 -.174 -30.761 23.827 .269 -30 20
5 24 3.121 -25.096 30 3.121 -25.096 20 -1.353 -32.789 30 6.365 -16.971 30
5 24 -1.353 -32.789 30 -1.353 -32.789 26.861 -6.962 -39.923 30 3.121 -25.096 30
5 24 -6.962 -39.923 30 -6.962 -39.923 29.985 -13.629 -46.37 30 -1.353 -32.789 30
3 16 -6.962 -39.923 30 -7.041 -40 30 -6.962 -39.923 29.985
1 16 -70.259 0 10 77.259 0 -2 0 0 -65.577 0 1 0 48\5-48edge.dat
5 24 -13.629 -46.37 30 -13.623 -46.364 26.364 -21.224 -52.029 31 -6.962 -39.923 31
3 16 -10.604 -43.444 28.315 -10 -42.861 28.431 -10 -42.861 30
4 16 -13.623 -46.364 26.364 -10.604 -43.444 28.315 -10 -42.861 30 -13.629 -46.37 30
2 24 -13.623 -46.364 26.364 -10.604 -43.444 28.315
2 24 -10.604 -43.444 28.315 -10 -42.861 28.431
2 24 -4.353 -32.789 10.664 -3.573 -31.515 11.515
2 24 -3.573 -31.515 11.515 -1.981 -28.913 15.408
2 24 -1.981 -28.913 15.408 -1.422 -28 20
2 24 -4.353 -32.789 29.336 -3.573 -31.515 28.485
2 24 -1.981 -28.913 24.592 -3.573 -31.515 28.485
2 24 -1.422 -28 20 -1.981 -28.913 24.592
2 24 -10.179 -39.923 31.985 -6.492 -35.408 31.087
2 24 -6.492 -35.408 8.913 -4.353 -32.789 10.664
2 24 -6.492 -35.408 31.087 -4.353 -32.789 29.336
2 24 -10.261 -40 32 -10.179 -39.923 31.985
2 24 -11 -40 10 -11 -33.781 10
2 24 -11 -33.781 10 -4.639 -33.781 10
0 BFC INVERTNEXT
1 16 -70.259 0 10 77.259 0 -2 0 0 -65.577 0 20 0 48\1-16cyli.dat
0 BFC INVERTNEXT
1 16 -70.259 0 30 77.259 0 -2 0 0 -65.577 0 1 0 48\1-48cyli.dat
5 24 -4.353 -32.789 29.336 -4.353 -32.789 30 -10.179 -39.923 10 .355 -25.096 10
5 24 -4.353 -32.789 10 -4.353 -32.789 10.664 -10.179 -39.923 10 .355 -25.096 10
5 24 -17.038 -46.364 26.364 -17.043 -46.37 30 -24.811 -52.029 10 -10.179 -39.923 10
5 24 -17.043 -46.369 10 -17.043 -46.369 13.644 -24.811 -52.029 10 -10.179 -39.923 10
4 16 -3.574 -31.515 11.515 .355 -25.096 10 -4.353 -32.788 10 -4.353 -32.788 10.664
3 16 -1.981 -28.913 24.592 -3.574 -31.515 28.485 .355 -25.096 30
4 16 -1.422 -28 20 -1.981 -28.913 24.592 .355 -25.096 30 .355 -25.096 10
3 16 -1.981 -28.913 15.408 -1.422 -28 20 .355 -25.096 10
3 16 -3.574 -31.515 11.515 -1.981 -28.913 15.408 .355 -25.096 10
4 16 -4.353 -32.788 30 .355 -25.096 30 -3.574 -31.515 28.485 -4.353 -32.788 29.336
3 16 -5.164 -33.781 10 -4.353 -32.788 10.664 -4.353 -32.788 10
3 16 -4.353 -32.788 30 -4.353 -32.788 29.336 -5.164 -33.781 30
4 16 0 -8 31 0 0 31 7 0 31 6.135 -8 31
1 16 3.067 -8 32.5 0 0 3.0674 0 1 0 -1.5 0 0 rect1.dat
2 24 6.135 -8 31 7 0 31
1 16 7 -1 10.5 0 -3 0 6 0 0 0 0 .5 box5-4a.dat
2 24 7 0 11 6.467 2.679 11
2 24 6.467 2.679 11 4.95 4.95 11
2 24 4.874 5 10 4.95 4.95 10
2 24 4.874 5 10 4.874 5 11
2 24 4.874 5 11 4.95 4.95 11
2 24 6.243 -7 11 7 0 11
2 24 6.243 -7 10 6.243 -7 11
2 24 -15.629 -48 23.916 -13.623 -46.364 26.364
2 24 -19.043 -48 23.916 -17.038 -46.364 26.364
4 16 -13.929 -43.444 28.315 -17.043 -46.37 30 -11 -40.6939 30 -11 -40.6939 28.862
3 16 -13.929 -43.444 28.315 -17.038 -46.364 26.364 -17.043 -46.37 30
2 24 -17.038 -46.364 26.364 -13.929 -43.444 28.315
3 16 -13.629 -46.37 30 -15.629 -48 23.364 -13.623 -46.364 26.364
4 16 -14.274 -46.895 30 -15.629 -48 23.916 -15.629 -48 23.364 -13.629 -46.37 30
4 16 -17.043 -46.37 30 -17.038 -46.364 26.364 -19.043 -48 22.916 -19.043 -48 23.916
3 16 -19.043 -48 23.916 -17.688 -46.895 30 -17.043 -46.37 30
4 16 -17.688 -46.895 30 -19.043 -48 23.916 -15.629 -48 23.916 -14.274 -46.895 30
2 24 -15.629 -48 23.916 -14.274 -46.895 30
2 24 -15.629 -48 23.916 -19.043 -48 23.916
2 24 -19.043 -48 23.916 -17.688 -46.895 30
1 16 0 10 40 -1 0 0 0 -1 0 0 0 1 peghole.dat
1 16 0 10 50 -1 0 0 0 -16 0 0 0 1 npeghol2.dat
1 16 0 10 40 -1 0 0 0 -1 0 0 0 1 4-4ring8.dat
0 BFC INVERTNEXT
1 16 0 8 40 -6 0 0 0 -16 0 0 0 6 4-4cyli.dat
1 16 0 10 40 0 0 -9 0 -18 0 -9 0 0 1-4cyli.dat
1 16 0 -8 40 0 0 -9 0 1 0 -9 0 0 1-4edge.dat
1 16 0 -8 40 0 0 -3 0 1 0 -3 0 0 1-4ring2.dat
1 16 0 -8 40 6 0 0 0 1 0 0 0 6 4-4edge.dat
1 16 0 -8 40 0 0 6 0 1 0 -6 0 0 3-4ndis.dat
4 16 -11 -40.6939 32 -11 -40 32 -11 -40 29 -11 -40.6939 30
3 16 -11 -40.6939 28.862 -11 -40.6939 30 -11 -40 29
2 24 -11 -40.6939 30 -11 -40.6939 32
2 24 -11 -40.6939 28.862 -11 -40.6939 30
2 24 -11 -40.6939 28.862 -11 -40 29
2 24 -13.929 -43.444 28.315 -11 -40.6939 28.862
2 24 -11 -40.6939 28.862 -11 -40.6939 32
2 24 -11 -40 32 -11 -40.6939 32
3 16 -11 -40 32 -11 -40.6939 32 -10 -40 32
2 24 -11 -40.6939 32 -10.261 -40 32
5 24 -7 7 8 -7 7 10 0 7 8 -20 8 8
Status:
Needs 2 More Votes (N)
Current Votes:
None
Official parents and subparts
Part Events:
2024-10-20 23:22:57
was this overwriting the flat sticker backside?!?
2024-10-21 10:11:33
looks like that the stickers just use the wrong subfiles...
this part seems ok
this part seems ok
2024-10-21 17:07:07
Yes, I agree to Rene. The stickers were using a so far non existing sub part. They should use s\13710as01.dat instead.
guess this part itself is ok
2024-10-29 21:46:43
@Gerald: The sticker parts have been updated to use their correct subparts. So there is no longer a conflict regarding your Hold.
2024-11-18 10:10:17
Thansk for the reminder Philo,
These are completely hidden inside, not required
1 12 -10.6 -40 9.5 -.4 0 0 0 1 0 0 0 -1.5 rect1.dat
2 14 -10.261 -40 8 -10.261 -40 11
2 24 -10.261 -40 29 -10.261 -40 32
This can be trimmed to the exact fit by removing
4 12 -10.261 -40 11 -10.261 -40 10 -13 -40 10 -13 -40 11.685
2 14 -10.261 -40 8 -10.261 -40 11
2 14 -13 -40 11 -13 -40 10
2 14 -11 -40 10 -13 -40 10
2 14 -11 -40 11 -13 -40 11
and replaced with :
1 12 -12 -40 10.5 0 0 -1 0 -1 0 -.5 0 0 rect.dat
This cyli
1 16 -30 -40 20 0 20 0 0 0 -9 9 0 0 2-4cyli.dat
is bleeding into a face here:
2 1 -10 -43.4443 11.6849 -10 -40 11
2 1 -10 -43.4443 28.3151 -10 -40 29
needs to be changed to
1 16 -30 -40 20 0 19 0 0 0 -9 9 0 0 2-4cyli.dat
1 16 -11 -40 20 0 1 0 -9 0 0 0 0 -9 3-16cyli.dat
1 16 -11 -40 20 0 1 0 -9 0 0 0 0 9 3-16cyli.dat
3 1 -10 -43.4443 11.6849 -10.604 -43.444 11.685 -10 -42.861 11.569
3 1 -10.604 -43.444 28.315 -10 -43.4443 28.3151 -10 -42.861 28.431
This
4 16 -11 -40.6939 32 -11 -40 32 -11 -40 29 -11 -40.6939 28
4 16 -13.929 -43.444 28.315 -17.043 -46.369 30 -10.261 -40 30 -10.261 -40 29
Shpul be changed to
4 16 -13.929 -43.444 28.315 -17.043 -46.369 30 -11 -40.6939 30 -11 -40.6939 28.862
4 16 -11 -40.6939 32 -11 -40 32 -11 -40 29 -11 -40.6939 30
3 16 -11 -40.6939 28.862 -11 -40.6939 30 -11 -40 29
2 24 -11 -40.6939 30 -11 -40.6939 32
2 24 -11 -40.6939 28.862 -11 -40.6939 30
2 24 -11 -40.6939 28.862 -11 -40 29
These are completely hidden inside, not required
1 12 -10.6 -40 9.5 -.4 0 0 0 1 0 0 0 -1.5 rect1.dat
2 14 -10.261 -40 8 -10.261 -40 11
2 24 -10.261 -40 29 -10.261 -40 32
This can be trimmed to the exact fit by removing
4 12 -10.261 -40 11 -10.261 -40 10 -13 -40 10 -13 -40 11.685
2 14 -10.261 -40 8 -10.261 -40 11
2 14 -13 -40 11 -13 -40 10
2 14 -11 -40 10 -13 -40 10
2 14 -11 -40 11 -13 -40 11
and replaced with :
1 12 -12 -40 10.5 0 0 -1 0 -1 0 -.5 0 0 rect.dat
This cyli
1 16 -30 -40 20 0 20 0 0 0 -9 9 0 0 2-4cyli.dat
is bleeding into a face here:
2 1 -10 -43.4443 11.6849 -10 -40 11
2 1 -10 -43.4443 28.3151 -10 -40 29
needs to be changed to
1 16 -30 -40 20 0 19 0 0 0 -9 9 0 0 2-4cyli.dat
1 16 -11 -40 20 0 1 0 -9 0 0 0 0 -9 3-16cyli.dat
1 16 -11 -40 20 0 1 0 -9 0 0 0 0 9 3-16cyli.dat
3 1 -10 -43.4443 11.6849 -10.604 -43.444 11.685 -10 -42.861 11.569
3 1 -10.604 -43.444 28.315 -10 -43.4443 28.3151 -10 -42.861 28.431
This
4 16 -11 -40.6939 32 -11 -40 32 -11 -40 29 -11 -40.6939 28
4 16 -13.929 -43.444 28.315 -17.043 -46.369 30 -10.261 -40 30 -10.261 -40 29
Shpul be changed to
4 16 -13.929 -43.444 28.315 -17.043 -46.369 30 -11 -40.6939 30 -11 -40.6939 28.862
4 16 -11 -40.6939 32 -11 -40 32 -11 -40 29 -11 -40.6939 30
3 16 -11 -40.6939 28.862 -11 -40.6939 30 -11 -40 29
2 24 -11 -40.6939 30 -11 -40.6939 32
2 24 -11 -40.6939 28.862 -11 -40.6939 30
2 24 -11 -40.6939 28.862 -11 -40 29
Fixed issues reported by Gerald
2025-07-22 22:27:01
Sorry for my late reply
seems I missed them, those are also hidden and can be removed
2 24 -10.179 -39.923 8.015 -6.492 -35.408 8.913
2 24 -10.261 -40 8 -10.179 -39.923 8.015
rest is fine!
seems I missed them, those are also hidden and can be removed
2 24 -10.179 -39.923 8.015 -6.492 -35.408 8.913
2 24 -10.261 -40 8 -10.179 -39.923 8.015
rest is fine!
see above
Deleted those 2 lines
2025-07-23 16:47:38
overlaps at the rings around the connholes
2025-07-24 14:35:16
Rene, can you post some coordinates, which overlaps you mean?
I guess they have been designed by purpose by the original part author [Philo] to simplify design and allow high res primitives to render with closed surfaces.
I guess they have been designed by purpose by the original part author [Philo] to simplify design and allow high res primitives to render with closed surfaces.
2025-07-24 15:01:44
Exactly. KISS philosophy.
2025-07-24 15:03:10
2025-07-24 15:31:00
Yes that was done for simplicity, IMHO it is fine as is
Change could be:
REMOVE:
1 13 -20 -10 -10 -1 0 0 0 0 1 0 16 0 npeghole.dat
4 13 -29 0 -10 -26.36 -6.36 -10 -26.36 -13.64 -10 -29 -20 -10
4 13 -11 -9 -10 -11 -20 -10 -13.64 -13.64 -10 -13.64 -6.36 -10
1 16 -10 0 -10 0 0 1 1 0 0 0 16 0 npeghole.dat
4 16 0 9 -10 -6.36 6.36 -10 -13.64 6.36 -10 -20 9 -10
4 16 0 -9 -10 -11 -9 -10 -13.64 -6.36 -10 -6.36 -6.36 -10
ADD:
1 10 -20 0 -10 -1 0 0 0 0 -1 0 16 0 npeghol6a.dat
1 10 -20 0 -10 1 0 0 0 0 -1 0 16 0 npeghol6d.dat
1 10 -20 -10 -10 -1 0 0 0 0 -1 0 16 0 npeghol7a.dat
4 10 -11 -9 -10 -11 -10 -10 -13.6361 -10 -10 -13.64 -6.36 -10
1 10 -20 0 -10 0 0 1 1 0 0 0 16 0 npeghol6a.dat
1 10 -20 0 -10 0 0 1 -1 0 0 0 16 0 npeghol6d.dat
1 10 -10 0 -10 0 0 1 1 0 0 0 16 0 npeghol7a.dat
4 10 -10 -6.3639 -10 -10 -9 -10 -11 -9 -10 -13.64 -6.36 -10
Change could be:
REMOVE:
1 13 -20 -10 -10 -1 0 0 0 0 1 0 16 0 npeghole.dat
4 13 -29 0 -10 -26.36 -6.36 -10 -26.36 -13.64 -10 -29 -20 -10
4 13 -11 -9 -10 -11 -20 -10 -13.64 -13.64 -10 -13.64 -6.36 -10
1 16 -10 0 -10 0 0 1 1 0 0 0 16 0 npeghole.dat
4 16 0 9 -10 -6.36 6.36 -10 -13.64 6.36 -10 -20 9 -10
4 16 0 -9 -10 -11 -9 -10 -13.64 -6.36 -10 -6.36 -6.36 -10
ADD:
1 10 -20 0 -10 -1 0 0 0 0 -1 0 16 0 npeghol6a.dat
1 10 -20 0 -10 1 0 0 0 0 -1 0 16 0 npeghol6d.dat
1 10 -20 -10 -10 -1 0 0 0 0 -1 0 16 0 npeghol7a.dat
4 10 -11 -9 -10 -11 -10 -10 -13.6361 -10 -10 -13.64 -6.36 -10
1 10 -20 0 -10 0 0 1 1 0 0 0 16 0 npeghol6a.dat
1 10 -20 0 -10 0 0 1 -1 0 0 0 16 0 npeghol6d.dat
1 10 -10 0 -10 0 0 1 1 0 0 0 16 0 npeghol7a.dat
4 10 -10 -6.3639 -10 -10 -9 -10 -11 -9 -10 -13.64 -6.36 -10
2025-07-24 15:31:43
I guess the part was made before the npeghols were broken down so far, therefore this was enough
Using new npeghol primitives as suggested.
still small overlaps from the outer two connholes to the curved wall...
maybe use 7-8 rings and fill the rest with 1-8tang/tndis/ndis?
1 16 0 8 20.5 0 1 0 0 0 1 10.5 0 0 rect1.dat is too long (goes behind a cyli which should be a cylo)
-> should be 1 16 0 8 22 0 1 0 1 0 0 0 0 9 rect3.dat
misses a condline: 5 24 -7 7 8 -7 7 10 0 7 8 -20 8 8
some other cyli+2xedge could be just a cylo
maybe use 7-8 rings and fill the rest with 1-8tang/tndis/ndis?
1 16 0 8 20.5 0 1 0 0 0 1 10.5 0 0 rect1.dat is too long (goes behind a cyli which should be a cylo)
-> should be 1 16 0 8 22 0 1 0 1 0 0 0 0 9 rect3.dat
misses a condline: 5 24 -7 7 8 -7 7 10 0 7 8 -20 8 8
some other cyli+2xedge could be just a cylo
Fixed overlaps, replaced cyli+edge with cylo where applicable, added condline.
1 16 -20 -40 8 -7 0 0 0 0 7 0 -1 0 1-4ndis.dat
should be R6 to avoid overlap
1 16 0 0 8 0 0 -7 -7 0 0 0 -1 0 2-4ndis.dat could also be R6
one more missing condline: 5 24 -7 -7 10 -7 -7 8 -29 -8 10 0 -7 10
should be R6 to avoid overlap
1 16 0 0 8 0 0 -7 -7 0 0 0 -1 0 2-4ndis.dat could also be R6
one more missing condline: 5 24 -7 -7 10 -7 -7 8 -29 -8 10 0 -7 10
Fixed overlaps and added condline.
2025-07-29 15:37:27
2025-07-29 16:32:36
Gaps:
2 4 -13.629 -46.37 10 -13.623 -46.364 13.636
2 4 -13.629 -46.37 30 -13.629 -46.37 26.356
2 4 -13.66 -46.394 26.319 -13.623 -46.364 26.364
2 4 -19.043 -48 23.916 -15.629 -48 23.916
2 4 -17.043 -46.37 30 -17.043 -46.37 26.364
2 4 -13.629 -46.37 10 -13.623 -46.364 13.636
2 4 -13.629 -46.37 30 -13.629 -46.37 26.356
2 4 -13.66 -46.394 26.319 -13.623 -46.364 26.364
2 4 -19.043 -48 23.916 -15.629 -48 23.916
2 4 -17.043 -46.37 30 -17.043 -46.37 26.364
2025-08-11 07:21:21
2025-08-11 07:53:10
Fixed those gaps as good as possible, but kept the vertices connecting to parent parts compatible.
There is still a tiny 3.6 µm gap between those primitives:
1 16 -20 -40 -10 -9 0 0 0 0 -9 0 18 0 3-8cyli.dat
1 16 -68.259 0 -10 77.259 0 0 0 0 -65.577 0 20 0 48\1-8cyli.dat
This could be solved by adding more decimals to the stretched 1-8cyli, but would then need to rework all related parent parts.
There is still a tiny 3.6 µm gap between those primitives:
1 16 -20 -40 -10 -9 0 0 0 0 -9 0 18 0 3-8cyli.dat
1 16 -68.259 0 -10 77.259 0 0 0 0 -65.577 0 20 0 48\1-8cyli.dat
This could be solved by adding more decimals to the stretched 1-8cyli, but would then need to rework all related parent parts.
Creative Commons Attribution License information
This part is copyright © Jens Brühl
Licensed under CC BY 4.0
Edits:
LDraw.org Parts Tracker,