File Detail parts/s/51702s01.dat

Unofficial File parts/s/51702s01.dat

File Header:

0 ~Duplo Portcullis  1 x  7 x  6 - Half
0 Name: s\51702s01.dat
0 Author: Peter Blomberg [WUIt]
0 !LDRAW_ORG Unofficial_Subpart
0 !LICENSE Licensed under CC BY 4.0 : see CAreadme.txt

0 BFC CERTIFY CCW

Show contents

0 // top
2 24 120 0 14 40 0 14
2 24 120 0 -14 120 0 -2.8
2 24 120 0 2.8 120 0 14
1 16 31.2 0 14 8.8 0 0 0 3 0 0 0 8.8 1-4cylo.dat
1 16 31.2 0 14 8.8 0 0 0 1 0 0 0 8.8 1-4chrd.dat
1 16 31.2 3 14 8.8 0 0 0 -1 0 0 0 8.8 1-4chrd.dat
1 16 124.2 0 0 0 0 4.2 0 1 0 -2.8 0 0 rect3.dat
3 16 40 0 14 120 0 2.8 120 0 14

0 // top inside
1 16 54.75 3 -7.25 0 0 7.5 0 -1 0 2.75 0 0 rect2p.dat
4 16 117 3 -10 102 3 -10 102 3 -4.5 117 3 14
4 16 47.25 3 -4.5 10.5 3 -4.5 10.5 3 14 40 3 14
3 16 47.25 3 -4.5 40 3 14 62.25 3 -4.5
4 16 102 3 -4.5 62.25 3 -4.5 40 3 14 117 3 14

0 // bolts
1 16 54.75 8 -16 5 0 0 0 0 5 0 2 0 4-4cylc.dat
1 16 109.5 8 -16 5 0 0 0 0 5 0 2 0 4-4cylc.dat
1 16 54.75 54.3 -16 5 0 0 0 0 5 0 2 0 4-4cylc.dat

0 // 9 boxes
1 16 54.75 48 0 1 0 0 0 1 0 0 0 1 s\51702s02.dat
1 16 0 96 0 1 0 0 0 1 0 0 0 1 s\51702s02.dat
1 16 54.75 96 0 1 0 0 0 1 0 0 0 1 s\51702s02.dat
1 16 0 144 0 1 0 0 0 1 0 0 0 1 s\51702s02.dat
1 16 54.75 144 0 1 0 0 0 1 0 0 0 1 s\51702s02.dat
1 16 0 192 0 1 0 0 0 1 0 0 0 1 s\51702s02.dat
1 16 54.75 192 0 1 0 0 0 1 0 0 0 1 s\51702s02.dat
1 16 0 240 0 1 0 0 0 1 0 0 0 1 s\51702s02.dat
1 16 54.75 240 0 1 0 0 0 1 0 0 0 1 s\51702s02.dat

0 // holes
0 BFC INVERTNEXT
1 16 27.375 30.3 14 16.875 0 0 0 0 17.7 0 -22.5 0 box4o4a.dat

1 16 27.375 252.6 2.75 -16.875 0 0 0 -1 0 0 0 11.25 rect3.dat
1 16 82.125 252.6 2.75 -16.875 0 0 0 -1 0 0 0 11.25 rect3.dat

0 // low beams
0 BFC INVERTNEXT
1 16 27.375 7.8 -11.25 16.875 0 0 0 0 -4.8 0 2.75 0 box2-5.dat
0 BFC INVERTNEXT
1 16 82.125 7.8 -11.25 16.875 0 0 0 0 -4.8 0 2.75 0 box2-5.dat
1 16 27.375 54.3 -8.5 16.875 0 0 0 0 6.3 0 1 0 rect.dat

0 // sides
1 16 120 117 0 0 8.4 0 117 0 0 0 0 2.8 box3u8p.dat
1 16 120 234 -2.8 0 0 8.4 6 0 0 0 5.6 0 tri3u3.dat
4 16 120 234 -2.8 120 0 -2.8 120 0 -14 120 132 -14
4 16 120 240 -2.8 120 234 -2.8 120 132 -14 120 260 -14
4 16 120 0 14 120 0 2.8 120 240 2.8 120 260 14
4 16 120 260 -14 120 260 14 120 240 2.8 120 240 -2.8
2 24 120 0 -14 120 132 -14
2 24 120 132 -14 120 260 -14
2 24 120 260 -14 120 260 14
2 24 120 260 14 120 0 14

0 // front
3 16 99 3 -14 120 0 -14 65.25 3 -14
3 16 65.25 3 -14 120 0 -14 44.25 3 -14
3 16 44.25 3 -14 120 0 -14 10.5 3 -14
3 16 65.25 3 -14 44.25 3 -14 65.25 6.3 -14
4 16 65.25 6.3 -14 44.25 3 -14 44.25 54.3 -14 65.25 54.3 -14
4 16 65.25 102.3 -14 65.25 54.3 -14 44.25 54.3 -14 44.25 102.3 -14
4 16 65.25 102.3 -14 44.25 102.3 -14 44.25 150.3 -14 65.25 150.3 -14
4 16 65.25 198.3 -14 65.25 150.3 -14 44.25 150.3 -14 44.25 198.3 -14
4 16 65.25 198.3 -14 44.25 198.3 -14 44.25 246.3 -14 65.25 246.3 -14
1 16 54.75 253.15 -14 -10.5 0 0 0 0 6.85 0 1 0 rect3.dat
3 16 99 260 -14 120 260 -14 99 246.3 -14
3 16 99 246.3 -14 120 260 -14 99 198.3 -14
4 16 99 150.3 -14 99 198.3 -14 120 260 -14 120 132 -14
3 16 99 150.3 -14 120 132 -14 99 102.3 -14
3 16 120 0 -14 99 3 -14 99 6.3 -14
3 16 120 0 -14 99 6.3 -14 99 54.3 -14
4 16 99 102.3 -14 120 132 -14 120 0 -14 99 54.3 -14

0 // sunken 3
3 16 10.5 3 -14 10.5 12.6 -8.5 10.5 3 -8.5
4 16 10.5 12.6 -8.5 10.5 3 -14 10.5 54.3 -14 10.5 48 -8.5
3 16 10.5 48 -8.5 10.5 54.3 -14 10.5 60.6 -8.5
3 16 10.5 96 -8.5 10.5 102.3 -14 10.5 108.6 -8.5
3 16 10.5 144 -8.5 10.5 150.3 -14 10.5 156.6 -8.5
3 16 10.5 192 -8.5 10.5 198.3 -14 10.5 204.6 -8.5
4 16 10.5 252.6 -8.5 10.5 240 -8.5 10.5 246.3 -14 10.5 260 -14
4 16 10.5 260 -14 10.5 260 14 10.5 252.6 14 10.5 252.6 -8.5

0 // sunken 4
4 16 65.25 3 -8.5 65.25 3 -14 65.25 6.3 -14 65.25 12.6 -8.5
3 16 65.25 48 -8.5 65.25 54.3 -14 65.25 60.6 -8.5
3 16 65.25 96 -8.5 65.25 102.3 -14 65.25 108.6 -8.5
3 16 65.25 144 -8.5 65.25 150.3 -14 65.25 156.6 -8.5
3 16 65.25 192 -8.5 65.25 198.3 -14 65.25 204.6 -8.5
4 16 65.25 246.3 -14 65.25 260 -14 65.25 252.6 -8.5 65.25 240 -8.5
4 16 65.25 260 -14 65.25 260 14 65.25 252.6 14 65.25 252.6 -8.5
2 24 65.25 6.3 -14 65.25 3 -14

0 // sunken 7
3 16 44.25 12.6 -8.5 44.25 3 -14 44.25 3 -8.5
4 16 44.25 3 -14 44.25 12.6 -8.5 44.25 48 -8.5 44.25 54.3 -14
3 16 44.25 48 -8.5 44.25 60.6 -8.5 44.25 54.3 -14
3 16 44.25 96 -8.5 44.25 108.6 -8.5 44.25 102.3 -14
3 16 44.25 144 -8.5 44.25 156.6 -8.5 44.25 150.3 -14
3 16 44.25 192 -8.5 44.25 204.6 -8.5 44.25 198.3 -14
4 16 44.25 252.6 -8.5 44.25 260 -14 44.25 246.3 -14 44.25 240 -8.5
4 16 44.25 252.6 14 44.25 260 14 44.25 260 -14 44.25 252.6 -8.5
2 24 44.25 3 -14 44.25 54.3 -14

0 // sunken 8
4 16 99 12.6 -8.5 99 6.3 -14 99 3 -14 99 3 -8.5
3 16 99 48 -8.5 99 60.6 -8.5 99 54.3 -14
3 16 99 96 -8.5 99 108.6 -8.5 99 102.3 -14
3 16 99 144 -8.5 99 156.6 -8.5 99 150.3 -14
3 16 99 192 -8.5 99 204.6 -8.5 99 198.3 -14
4 16 99 240 -8.5 99 252.6 -8.5 99 260 -14 99 246.3 -14
4 16 99 252.6 14 99 260 14 99 260 -14 99 252.6 -8.5
2 24 99 3 -14 99 6.3 -14
2 24 99 246.3 -14 99 260 -14

0 // tip 3
2 24 5 277 -7 10.5 260 -14
2 24 5 277 -7 5 277 14
2 24 5 277 14 10.5 260 14
2 24 10.5 260 -14 10.5 260 14
4 16 10.5 260 -14 5 277 -7 5 277 14 10.5 260 14

0 // tip 4
2 24 44.25 260 -14 49.75 277 -7
2 24 59.75 277 -7 65.25 260 -14
2 24 44.25 260 14 49.75 277 14
2 24 59.75 277 14 65.25 260 14
2 24 65.25 260 -14 65.25 260 14
2 24 44.25 260 -14 44.25 260 14
4 16 44.25 260 -14 49.75 277 -7 59.75 277 -7 65.25 260 -14
4 16 44.25 260 14 49.75 277 14 49.75 277 -7 44.25 260 -14
1 16 54.75 277 3.5 5 0 0 0 -1 0 0 0 -10.5 rect.dat
4 16 65.25 260 -14 59.75 277 -7 59.75 277 14 65.25 260 14

0 // tip 5
2 24 99 260 -14 104.5 277 -7
2 24 114.5 277 -7 120 260 -14
2 24 99 260 14 104.5 277 14
2 24 99 260 -14 120 260 -14
2 24 114.5 277 14 120 260 14
2 24 99 260 -14 99 260 14
4 16 99 260 -14 104.5 277 -7 114.5 277 -7 120 260 -14
4 16 99 260 14 104.5 277 14 104.5 277 -7 99 260 -14
1 16 109.5 277 3.5 5 0 0 0 -1 0 0 0 -10.5 rect.dat
4 16 120 260 -14 114.5 277 -7 114.5 277 14 120 260 14

0 // holes inside
2 24 7.5 51 14 7.5 3 14
1 16 27.375 51 4.75 -19.875 0 0 0 -1 0 0 0 9.25 rect3.dat
4 16 7.5 3 -10 7.5 3 14 7.5 51 14 7.5 51 -4.5
1 16 28.875 9.6 4.75 18.375 0 0 0 1 0 0 0 9.25 rect2a.dat
1 16 47.25 30.3 4.75 0 -1 0 0 0 -20.7 9.25 0 0 rect1.dat

0 // inner side
1 16 117 130.5 2 0 1 0 127.5 0 0 0 0 12 rect.dat

0 // tip inner
2 24 111.8235 274 14 117 258 14
2 24 102 258 14 107.1765 274 14
4 16 111.8235 274 14 111.8235 274 -3 117 258 -10 117 258 14
2 24 111.8235 274 -3 117 258 -10
2 24 102 258 -10 107.1765 274 -3
4 16 111.8235 274 -3 107.1765 274 -3 102 258 -10 117 258 -10
1 16 109.5 274 5.5 2.3235 0 0 0 1 0 0 0 8.5 rect.dat
2 24 102 258 14 102 258 -10
4 16 102 258 -10 107.1765 274 -3 107.1765 274 14 102 258 14

2 24 57.0735 274 14 62.25 258 14
2 24 47.25 258 14 52.4265 274 14
4 16 57.0735 274 14 57.0735 274 -3 62.25 258 -10 62.25 258 14
2 24 57.0735 274 -3 62.25 258 -10
2 24 47.25 258 -10 52.4265 274 -3
4 16 57.0735 274 -3 52.4265 274 -3 47.25 258 -10 62.25 258 -10
1 16 54.75 274 5.5 2.3235 0 0 0 1 0 0 0 8.5 rect.dat
2 24 47.25 258 14 47.25 258 -10
2 24 62.25 258 14 62.25 258 -10
4 16 47.25 258 -10 52.4265 274 -3 52.4265 274 14 47.25 258 14

2 24 2.3235 274 14 7.5 258 14
4 16 2.3235 274 14 2.3235 274 -3 7.5 258 -10 7.5 258 14
2 24 2.3235 274 -3 7.5 258 -10
2 24 2.3235 274 -3 2.3235 274 14
2 24 7.5 258 14 7.5 258 -10

0 // low beams inner
1 16 27.375 54.3 -4.5 19.875 0 0 0 0 3.3 0 -1 0 rect.dat

0 // front inside
2 24 7.5 3 -10 7.5 3 14
2 24 7.5 3 14 10.5 3 14
1 16 28.875 6.3 -4.5 18.375 0 0 0 0 3.3 0 -1 0 rect.dat
1 16 82.125 6.3 -4.5 19.875 0 0 0 0 3.3 0 -1 0 rect.dat
1 16 10.5 6.3 4.75 0 -1 0 3.3 0 0 0 0 9.25 rect3.dat

0 // inside 1
3 16 102 6.3 -10 102 3 -10 117 3 -10
3 16 102 6.3 -10 117 3 -10 102 54.3 -10
3 16 102 54.3 -10 117 3 -10 102 102.3 -10
4 16 102 102.3 -10 117 3 -10 117 258 -10 102 150.3 -10
3 16 102 150.3 -10 117 258 -10 102 198.3 -10
3 16 102 198.3 -10 117 258 -10 102 246.3 -10
3 16 102 246.3 -10 117 258 -10 102 258 -10
2 24 102 246.3 -10 102 258 -10
2 24 102 258 -10 117 258 -10
2 24 102 6.3 -10 102 3 -10
2 24 102 3 -10 117 3 -10

0 // inside 2
4 16 62.25 54.3 -10 47.25 54.3 -10 47.25 3 -10 62.25 6.3 -10
3 16 62.25 3 -10 62.25 6.3 -10 47.25 3 -10
2 24 47.25 3 -10 62.25 3 -10
2 24 62.25 6.3 -10 62.25 3 -10
2 24 47.25 54.3 -10 47.25 3 -10
4 16 47.25 54.3 -10 62.25 54.3 -10 62.25 102.3 -10 47.25 102.3 -10
4 16 62.25 150.3 -10 47.25 150.3 -10 47.25 102.3 -10 62.25 102.3 -10
4 16 47.25 150.3 -10 62.25 150.3 -10 62.25 198.3 -10 47.25 198.3 -10
4 16 62.25 246.3 -10 47.25 246.3 -10 47.25 198.3 -10 62.25 198.3 -10
1 16 54.75 252.15 -10 7.5 0 0 0 0 5.85 0 -1 0 rect3.dat

0 // bridges
1 16 82.125 249.6 4.75 19.875 0 0 0 1 0 0 0 9.25 rect3.dat
1 16 27.375 249.6 4.75 19.875 0 0 0 1 0 0 0 9.25 rect3.dat

0 // back helm
4 16 117 3 14 40 3 14 40 0 14 120 0 14
4 16 120 260 14 117 258 14 117 3 14 120 0 14
4 16 114.5 277 14 111.8235 274 14 117 258 14 120 260 14
4 16 114.5 277 14 104.5 277 14 107.1765 274 14 111.8235 274 14
4 16 104.5 277 14 99 260 14 102 258 14 107.1765 274 14
2 24 102 258 14 102 249.6 14
2 24 99 260 14 99 252.6 14
4 16 102 249.6 14 102 258 14 99 260 14 99 252.6 14
4 16 62.25 249.6 14 102 249.6 14 99 252.6 14 65.25 252.6 14
2 24 62.25 258 14 62.25 249.6 14
2 24 65.25 260 14 65.25 252.6 14
4 16 65.25 260 14 62.25 258 14 62.25 249.6 14 65.25 252.6 14
4 16 65.25 260 14 59.75 277 14 57.0735 274 14 62.25 258 14
4 16 59.75 277 14 49.75 277 14 52.4265 274 14 57.0735 274 14
4 16 47.25 258 14 52.4265 274 14 49.75 277 14 44.25 260 14
4 16 47.25 249.6 14 47.25 258 14 44.25 260 14 44.25 252.6 14
2 24 44.25 260 14 44.25 252.6 14
2 24 47.25 258 14 47.25 249.6 14
4 16 7.5 249.6 14 47.25 249.6 14 44.25 252.6 14 10.5 252.6 14
2 24 7.5 249.6 14 7.5 258 14
2 24 10.5 252.6 14 10.5 260 14
4 16 7.5 249.6 14 10.5 252.6 14 10.5 260 14 7.5 258 14
4 16 7.5 258 14 10.5 260 14 5 277 14 2.3235 274 14

4 16 7.5 51 14 10.5 48 14 44.25 48 14 47.25 51 14
4 16 47.25 9.6 14 47.25 51 14 44.25 48 14 44.25 12.6 14
4 16 10.5 9.6 14 47.25 9.6 14 44.25 12.6 14 10.5 12.6 14
4 16 7.5 3 14 10.5 12.6 14 10.5 48 14 7.5 51 14
3 16 10.5 3 14 10.5 9.6 14 7.5 3 14
3 16 10.5 9.6 14 10.5 12.6 14 7.5 3 14

4 16 102 249.6 14 102 249.6 -4.5 102 258 -10 102 258 14
4 16 47.25 249.6 14 47.25 249.6 -4.5 47.25 258 -10 47.25 258 14
4 16 62.25 258 -10 62.25 249.6 -4.5 62.25 249.6 14 62.25 258 14
4 16 7.5 258 -10 7.5 249.6 -4.5 7.5 249.6 14 7.5 258 14

2 24 117 3 14 40 3 14
2 24 102 3 -10 102 3 -4.5
2 24 40 0 14 40 3 14

0 // back joiner 1
4 16 102 3 -10 102 6.3 -10 102 9.6 -4.5 102 3 -4.5
3 16 102 51 -4.5 102 54.3 -10 102 57.6 -4.5
3 16 102 99 -4.5 102 102.3 -10 102 105.6 -4.5
3 16 102 147 -4.5 102 150.3 -10 102 153.6 -4.5
3 16 102 195 -4.5 102 198.3 -10 102 201.6 -4.5
4 16 102 258 -10 102 249.6 -4.5 102 243 -4.5 102 246.3 -10

0 // back joiner 2
4 16 62.25 3 -4.5 62.25 9.6 -4.5 62.25 6.3 -10 62.25 3 -10
3 16 62.25 51 -4.5 62.25 57.6 -4.5 62.25 54.3 -10
3 16 62.25 99 -4.5 62.25 105.6 -4.5 62.25 102.3 -10
3 16 62.25 147 -4.5 62.25 153.6 -4.5 62.25 150.3 -10
3 16 62.25 195 -4.5 62.25 201.6 -4.5 62.25 198.3 -10
4 16 62.25 243 -4.5 62.25 249.6 -4.5 62.25 258 -10 62.25 246.3 -10

0 // back joiner 3
3 16 47.25 3 -4.5 47.25 3 -10 47.25 9.6 -4.5
4 16 47.25 51 -4.5 47.25 9.6 -4.5 47.25 3 -10 47.25 54.3 -10
3 16 47.25 54.3 -10 47.25 57.6 -4.5 47.25 51 -4.5
3 16 47.25 99 -4.5 47.25 102.3 -10 47.25 105.6 -4.5
3 16 47.25 147 -4.5 47.25 150.3 -10 47.25 153.6 -4.5
3 16 47.25 195 -4.5 47.25 198.3 -10 47.25 201.6 -4.5
4 16 47.25 258 -10 47.25 249.6 -4.5 47.25 243 -4.5 47.25 246.3 -10

0 // back joiner 4
4 16 7.5 57.6 -4.5 7.5 54.3 -10 7.5 3 -10 7.5 51 -4.5
3 16 7.5 99 -4.5 7.5 105.6 -4.5 7.5 102.3 -10
3 16 7.5 147 -4.5 7.5 153.6 -4.5 7.5 150.3 -10
3 16 7.5 195 -4.5 7.5 201.6 -4.5 7.5 198.3 -10
4 16 7.5 243 -4.5 7.5 249.6 -4.5 7.5 258 -10 7.5 246.3 -10

0 // reinforcements
1 16 54.75 232 -10 7.5 0 0 0 0 1.5 0 22 0 box3u2p.dat
1 16 54.75 165 -10 7.5 0 0 0 0 1.5 0 22 0 box3u2p.dat
1 16 109.5 165 -10 7.5 0 0 0 0 1.5 0 22 0 box3u2p.dat

Status:

Needs More Votes (CN)

This part has the following automated holds from the Parts Tracker

Has uncertified subfiles

parts/s/51702s02.dat (Needs More Votes)
No path of certified files to a certified or official parent in the parts folder

Current Votes:

User	Vote
Holly-Wood	Certify

Official parents and subparts

Part Events:

Peter Blomberg [WUIt]

initially submitted the part.

2024-11-27 16:21:51

The part is slightly wider than 6x6 due to the sliding fins, so the effective size is 1x7x6 instead of 1x6x7 as listed on Bricklink. Compare e.g. the oversized 1x3x2 triangle 42025. The last number is always the height.

Willy Tschager [Holly-Wood]

posted a vote of Hold.

2025-04-15 18:00:23

* Check this rect:

1 16 82.175 252.6 2.75 0 0 16.875 0 -1 0 11.25 0 0 rect1.dat

* IMHO you should split this:

2 24 65.25 260 -14 65.25 3 -14

in half to avoid long stretched triangles.

Rene Rechthaler [Blechtaler]

made the following comment.

2025-04-15 18:52:03

should the "holes" get subparted in a 2x2 group (including the split front)?

Peter Blomberg [WUIt]

submitted a new version of the part.

2025-04-16 05:59:18

Corrected rect as suggested. Added chrds to subfile.
Split front rects to reduce length of triangles as suggested.
Decided against creating a single-use subfile, which are typically inlined to reduce the number of files to be reviewed, because the part is not symmetric in the y-direction, thus drastically reducing the number of lines in the subfile.

Rene Rechthaler [Blechtaler]

made the following comment.

2025-04-16 10:21:28

i meant you could subfile one hole (inverted inner box, outer box, joiner quads, the inside/outside rect below) and use this subfile then 9 times (the top center one is different)
all rear and inside box prims are the same size...
19.875 0 0 0 0 20.7 0 -18.5 0 box4o4a.dat
16.875 0 0 0 0 17.7 0 -22.5 0 box4o4a.dat
maybe even a portion of the front+joiner and the rivet cylc
one more file, but this file would be much smaller

Willy Tschager [Holly-Wood]

posted a vote of Certify.

2025-04-16 13:12:39

Peter Blomberg [WUIt]

posted a vote of Hold.

2025-04-17 16:19:51

Will sub as suggested

Peter Blomberg [WUIt]

submitted a new version of the part.

2025-04-17 21:29:40

Subfiled as suggested.

Rene Rechthaler [Blechtaler]

made the following comment.

2025-04-17 21:58:23

much better!
should the long quads inside also get split? to avoid both long triangles and t-junk... (they arent that visible)

Willy Tschager [Holly-Wood]

posted a vote of Hold.

2025-04-18 12:00:30

* These two are already covered by the rect:

2 24 102 258 -10 117 258 -10
2 24 47.25 258 -10 62.25 258 -10

Peter Blomberg [WUIt]

submitted a new version of the part.

2025-04-20 22:19:41

Split long quads both outside and inside as suggested. Subfiled part of them as suggested earlier by Rene. Unfortunately, this means updating also the main part and the subsubfile.

Rene Rechthaler [Blechtaler]

made the following comment.

2025-04-20 23:24:57

should the small triangles also get moved to the s02?

Willy Tschager [Holly-Wood]

posted a vote of Hold.

2025-04-21 09:09:40

* Duplicated line:

2 24 62.25 54.3 -10 62.25 6.3 -10

Peter Blomberg [WUIt]

submitted a new version of the part.

2025-04-21 12:06:17

Removed duplicated line as suggested.

Willy Tschager [Holly-Wood]

posted a vote of Certify.

2025-04-22 11:04:45

Peter Blomberg [WUIt]

edited the part header.

2025-04-30 20:50:50

Header Edits

description:
~Duplo Portcullis 1 x 7 x 6 (Half)
to
~Duplo Portcullis 1 x 7 x 6 - Half

Comment:
Changed parenthesis to dash in description

Creative Commons Attribution License information