File Detail parts/s/6991s01.dat

Unofficial File parts/s/6991s01.dat

~Technic Rotation Joint Disk with Pin and 2 Technic Pins - Quarter

File Header:

0 ~Technic Rotation Joint Disk with Pin and 2 Technic Pins - Quarter
0 Name: s\6991s01.dat
0 Author: Gerald Lasser [GeraldLasser]
0 !LDRAW_ORG Unofficial_Subpart
0 !LICENSE Licensed under CC BY 4.0 : see CAreadme.txt

0 BFC CERTIFY CCW

0 !HISTORY 2025-01-04 [GeraldLasser] based on 79505 by [Philo]

Show contents

1 16 0 7 0 30 0 0 0 3 0 0 0 -30 48\1-4cylo.dat
1 16 0 7 0 30 0 0 0 1 0 0 0 -30 48\1-4chrd.dat
1 16 0 10 0 30 0 0 0 -1 0 0 0 -30 48\1-4chrd.dat
1 16 0 -6 0 0 0 26 0 13 0 -26 0 0 48\1-4cylo.dat
1 16 0 5 0 4 0 0 0 1 0 0 0 -4 1-4ring2.dat
1 16 0 5 0 12 0 0 0 2 0 0 0 -12 1-4cylo.dat
1 16 0 7 0 12 0 0 0 1 0 0 0 -12 1-4ndis.dat
3 16 30 7 0 12 7 0 12 7 -12
3 16 0 7 -30 30 7 0 12 7 -12
3 16 0 7 -30 12 7 -12 0 7 -12

1 16 0 -8 0 0 0 3 0 1 0 -3 0 0 3-16ring2.dat
1 16 0 -8 0 0 0 9 0 2 0 -9 0 0 3-16cylo.dat
1 16 0 0 0 8 0 0 0 5 0 0 0 -8 1-4cyli.dat
1 16 0 -6 0 0 0 8 0 6 0 -8 0 0 3-16cyli.dat
1 16 0 5 0 8 0 0 0 1 0 0 0 -8 1-4edge.dat
1 16 0 -6 0 0 0 8 0 1 0 -8 0 0 3-16edge.dat
1 16 0 -6 0 0 0 1 0 -1 0 -1 0 0 3-16ring8.dat
0 BFC INVERTNEXT
1 16 0 0 0 6 0 0 0 8 0 0 0 -6 1-4cyli.dat
0 BFC INVERTNEXT
1 16 0 -8 0 0 0 6 0 8 0 -6 0 0 3-16cyli.dat
1 16 0 -8 0 0 0 6 0 1 0 -6 0 0 3-16edge.dat
1 16 0 8 0 2 0 0 0 -1 0 0 0 -2 1-4ring3.dat
1 16 0 8 0 6 0 0 0 -1 0 0 0 -6 1-4edge.dat
0 BFC INVERTNEXT
1 16 0 8 0 8 0 0 0 2 0 0 0 -8 1-4cylo.dat
1 16 0 10 0 8 0 0 0 -1 0 0 0 -8 1-4ndis.dat
3 16 0 10 -30 0 10 -8 8 10 -8
3 16 30 10 0 8 10 -8 8 10 0
3 16 8 10 -8 30 10 0 0 10 -30

2 24 1.5 -6 -23.45 0 -6 -23.69
2 24 3.0016 -6 -22.7998 1.5 -6 -23.45
2 24 4.6204 -6 -23.0392 6.1314 -6 -22.8828
2 24 3.0016 -6 -22.7998 4.6204 -6 -23.0392
2 24 7.5182 -6 -22.2627 6.1314 -6 -22.8828
2 24 8.8004 -6 -21.246 7.5182 -6 -22.2627
2 24 10.426 -6 -21.0583 11.845 -6 -20.5161
2 24 8.8004 -6 -21.246 10.426 -6 -21.0583
2 24 13.024 -6 -19.5583 11.845 -6 -20.5161
2 24 13.9994 -6 -18.2444 13.024 -6 -19.5583
2 24 15.521 -6 -17.6423 16.7514 -6 -16.7514
2 24 13.9994 -6 -18.2444 15.521 -6 -17.6423
2 24 17.6423 -6 -15.521 16.7514 -6 -16.7514
2 24 18.2444 -6 -13.9994 17.6423 -6 -15.521
2 24 19.5583 -6 -13.024 20.5161 -6 -11.845
2 24 18.2444 -6 -13.9994 19.5583 -6 -13.024
2 24 21.0583 -6 -10.426 20.5161 -6 -11.845
2 24 21.246 -6 -8.8004 21.0583 -6 -10.426
2 24 22.2627 -6 -7.5182 22.8828 -6 -6.1314
2 24 21.246 -6 -8.8004 22.2627 -6 -7.5182
2 24 23.0392 -6 -4.6204 22.8828 -6 -6.1314
2 24 22.7998 -6 -3.0016 23.0392 -6 -4.6204
2 24 23.45 -6 -1.5 23.69 -6 0
2 24 22.7998 -6 -3.0016 23.45 -6 -1.5
3 16 4.6204 -6 -23.0392 3.0016 -6 -22.7998 1.5 -6 -23.45
4 16 1.5 -6 -23.45 0 -6 -23.69 6.1314 -6 -22.8828 4.6204 -6 -23.0392
1 16 0 -6 0 0 0 26 0 1 0 -26 0 0 48\1-24chrd.dat
4 16 6.7288 -6 -25.1134 6.1314 -6 -22.8828 0 -6 -23.69 0 -6 -26
3 16 10.426 -6 -21.0583 8.8004 -6 -21.246 7.5182 -6 -22.2627
4 16 7.5182 -6 -22.2627 6.1314 -6 -22.8828 11.845 -6 -20.5161 10.426 -6 -21.0583
1 16 0 -6 0 6.7293 0 25.11407 0 1 0 -25.11407 0 6.7293 48\1-24chrd.dat
4 16 12.9993 -6 -22.5161 11.845 -6 -20.5161 6.1314 -6 -22.8828 6.7292 -6 -25.1138
3 16 15.521 -6 -17.6423 13.9994 -6 -18.2444 13.024 -6 -19.5583
4 16 13.024 -6 -19.5583 11.845 -6 -20.5161 16.7514 -6 -16.7514 15.521 -6 -17.6423
1 16 0 -6 0 13 0 22.51666 0 1 0 -22.51666 0 13 48\1-24chrd.dat
4 16 18.384 -6 -18.3844 16.7514 -6 -16.7514 11.845 -6 -20.5161 13 -6 -22.5164
3 16 19.5583 -6 -13.024 18.2444 -6 -13.9994 17.6423 -6 -15.521
4 16 17.6423 -6 -15.521 16.7514 -6 -16.7514 20.5161 -6 -11.845 19.5583 -6 -13.024
1 16 0 -6 0 18.38478 0 18.38478 0 1 0 -18.38478 0 18.38478 48\1-24chrd.dat
4 16 22.5158 -6 -13 20.5161 -6 -11.845 16.7514 -6 -16.7514 18.3846 -6 -18.3846
3 16 22.2627 -6 -7.5182 21.246 -6 -8.8004 21.0583 -6 -10.426
4 16 21.0583 -6 -10.426 20.5161 -6 -11.845 22.8828 -6 -6.1314 22.2627 -6 -7.5182
1 16 0 -6 0 22.51666 0 13 0 1 0 -13 0 22.51666 48\1-24chrd.dat
4 16 25.1132 -6 -6.7294 22.8828 -6 -6.1314 20.5161 -6 -11.845 22.5164 -6 -13
3 16 23.45 -6 -1.5 22.7998 -6 -3.0016 23.0392 -6 -4.6204
4 16 23.0392 -6 -4.6204 22.8828 -6 -6.1314 23.69 -6 0 23.45 -6 -1.5
1 16 0 -6 0 25.11407 0 6.7293 0 1 0 -6.7293 0 25.11407 48\1-24chrd.dat
4 16 25.9992 -6 0 23.69 -6 0 22.8828 -6 -6.1314 25.1138 -6 -6.7292
2 24 1.5 7 -23.45 0 7 -23.69
2 24 3.0016 7 -22.7998 1.5 7 -23.45
2 24 4.6204 7 -23.0392 6.1314 7 -22.8828
2 24 3.0016 7 -22.7998 4.6204 7 -23.0392
2 24 7.5182 7 -22.2627 6.1314 7 -22.8828
2 24 8.8004 7 -21.246 7.5182 7 -22.2627
2 24 10.426 7 -21.0583 11.845 7 -20.5161
2 24 8.8004 7 -21.246 10.426 7 -21.0583
2 24 13.024 7 -19.5583 11.845 7 -20.5161
2 24 13.9994 7 -18.2444 13.024 7 -19.5583
2 24 15.521 7 -17.6423 16.7514 7 -16.7514
2 24 13.9994 7 -18.2444 15.521 7 -17.6423
2 24 17.6423 7 -15.521 16.7514 7 -16.7514
2 24 18.2444 7 -13.9994 17.6423 7 -15.521
2 24 19.5583 7 -13.024 20.5161 7 -11.845
2 24 18.2444 7 -13.9994 19.5583 7 -13.024
2 24 21.0583 7 -10.426 20.5161 7 -11.845
2 24 21.246 7 -8.8004 21.0583 7 -10.426
2 24 22.2627 7 -7.5182 22.8828 7 -6.1314
2 24 21.246 7 -8.8004 22.2627 7 -7.5182
2 24 23.0392 7 -4.6204 22.8828 7 -6.1314
2 24 22.7998 7 -3.0016 23.0392 7 -4.6204
2 24 23.45 7 -1.5 23.69 7 0
2 24 22.7998 7 -3.0016 23.45 7 -1.5
5 24 23.69 7 0 23.69 -6 0 23.45 -6 1.5 23.45 -6 -1.5
2 24 13.9994 7 -18.2444 13.9994 -6 -18.2444
5 24 0 7 -23.69 0 -6 -23.69 -1.5 -6 -23.45 1.5 -6 -23.45
2 24 8.8004 7 -21.246 8.8004 -6 -21.246
2 24 22.7998 7 -3.0016 22.7998 -6 -3.0016
2 24 3.0016 7 -22.7998 3.0016 -6 -22.7998
2 24 21.246 7 -8.8004 21.246 -6 -8.8004
2 24 18.2444 7 -13.9994 18.2444 -6 -13.9994
4 16 3.0016 -6 -22.7998 3.0016 7 -22.7998 1.5 7 -23.45 1.5 -6 -23.45
4 16 1.5 -6 -23.45 1.5 7 -23.45 0 7 -23.69 0 -6 -23.69
4 16 11.845 -6 -20.5161 11.845 7 -20.5161 10.426 7 -21.0583 10.426 -6 -21.0583
4 16 10.426 -6 -21.0583 10.426 7 -21.0583 8.8004 7 -21.246 8.8004 -6 -21.246
4 16 13.9994 -6 -18.2444 13.9994 7 -18.2444 13.024 7 -19.5583 13.024 -6 -19.5583
4 16 13.024 -6 -19.5583 13.024 7 -19.5583 11.845 7 -20.5161 11.845 -6 -20.5161
4 16 6.1314 -6 -22.8828 6.1314 7 -22.8828 4.6204 7 -23.0392 4.6204 -6 -23.0392
4 16 4.6204 -6 -23.0392 4.6204 7 -23.0392 3.0016 7 -22.7998 3.0016 -6 -22.7998
4 16 8.8004 -6 -21.246 8.8004 7 -21.246 7.5182 7 -22.2627 7.5182 -6 -22.2627
4 16 7.5182 -6 -22.2627 7.5182 7 -22.2627 6.1314 7 -22.8828 6.1314 -6 -22.8828
4 16 20.5161 -6 -11.845 20.5161 7 -11.845 19.5583 7 -13.024 19.5583 -6 -13.024
4 16 19.5583 -6 -13.024 19.5583 7 -13.024 18.2444 7 -13.9994 18.2444 -6 -13.9994
4 16 21.246 -6 -8.8004 21.246 7 -8.8004 21.0583 7 -10.426 21.0583 -6 -10.426
4 16 21.0583 -6 -10.426 21.0583 7 -10.426 20.5161 7 -11.845 20.5161 -6 -11.845
4 16 16.7514 -6 -16.7514 16.7514 7 -16.7514 15.521 7 -17.6423 15.521 -6 -17.6423
4 16 15.521 -6 -17.6423 15.521 7 -17.6423 13.9994 7 -18.2444 13.9994 -6 -18.2444
4 16 18.2444 -6 -13.9994 18.2444 7 -13.9994 17.6423 7 -15.521 17.6423 -6 -15.521
4 16 17.6423 -6 -15.521 17.6423 7 -15.521 16.7514 7 -16.7514 16.7514 -6 -16.7514
4 16 23.69 -6 0 23.69 7 0 23.45 7 -1.5 23.45 -6 -1.5
4 16 23.45 -6 -1.5 23.45 7 -1.5 22.7998 7 -3.0016 22.7998 -6 -3.0016
4 16 22.8828 -6 -6.1314 22.8828 7 -6.1314 22.2627 7 -7.5182 22.2627 -6 -7.5182
4 16 22.2627 -6 -7.5182 22.2627 7 -7.5182 21.246 7 -8.8004 21.246 -6 -8.8004
4 16 22.7998 -6 -3.0016 22.7998 7 -3.0016 23.0392 7 -4.6204 23.0392 -6 -4.6204
4 16 23.0392 -6 -4.6204 23.0392 7 -4.6204 22.8828 7 -6.1314 22.8828 -6 -6.1314
5 24 11.845 7 -20.5161 11.845 -6 -20.5161 13.024 7 -19.5583 10.426 7 -21.0583
5 24 10.426 7 -21.0583 10.426 -6 -21.0583 11.845 7 -20.5161 8.8004 7 -21.246
5 24 13.024 7 -19.5583 13.024 -6 -19.5583 13.9994 7 -18.2444 11.845 7 -20.5161
5 24 6.1314 7 -22.8828 6.1314 -6 -22.8828 7.5182 7 -22.2627 4.6204 7 -23.0392
5 24 4.6204 7 -23.0392 4.6204 -6 -23.0392 6.1314 7 -22.8828 3.0016 7 -22.7998
5 24 7.5182 7 -22.2627 7.5182 -6 -22.2627 8.8004 7 -21.246 6.1314 7 -22.8828
5 24 20.5161 7 -11.845 20.5161 -6 -11.845 21.0583 7 -10.426 19.5583 7 -13.024
5 24 19.5583 7 -13.024 19.5583 -6 -13.024 20.5161 7 -11.845 18.2444 7 -13.9994
5 24 21.0583 7 -10.426 21.0583 -6 -10.426 21.246 7 -8.8004 20.5161 7 -11.845
5 24 16.7514 7 -16.7514 16.7514 -6 -16.7514 17.6423 7 -15.521 15.521 7 -17.6423
5 24 15.521 7 -17.6423 15.521 -6 -17.6423 16.7514 7 -16.7514 13.9994 7 -18.2444
5 24 17.6423 7 -15.521 17.6423 -6 -15.521 18.2444 7 -13.9994 16.7514 7 -16.7514
5 24 23.45 7 -1.5 23.45 -6 -1.5 23.69 7 0 22.7998 7 -3.0016
5 24 22.8828 7 -6.1314 22.8828 -6 -6.1314 23.0392 7 -4.6204 22.2627 7 -7.5182
5 24 22.2627 7 -7.5182 22.2627 -6 -7.5182 22.8828 7 -6.1314 21.246 7 -8.8004
5 24 23.0392 7 -4.6204 23.0392 -6 -4.6204 22.7998 7 -3.0016 22.8828 7 -6.1314
5 24 1.5 7 -23.45 1.5 -6 -23.45 3.0016 7 -22.7998 0 7 -23.69

1 16 6 -1.5 0 0 1 -.298 1.5 0 0 0 0 -1.5 8\1-4ndis.dat
1 16 8 -1.5 0 0 -1 -.298 1.5 0 0 0 0 -1.5 8\1-4ndis.dat
0 BFC INVERTNEXT
1 16 8 -1.5 0 0 -2 -.298 1.5 0 0 0 0 -1.5 8\1-4cylo.dat
2 24 5.702 -8 -1.5 5.702 -1.5 -1.5
2 24 7.702 -6 -1.5 7.702 -1.5 -1.5
2 24 5.702 -8 -1.5 8.32 -8 -1.5
4 16 8.32 -8 -1.5 5.702 -8 -1.5 5.5434 -8 -2.2962 8.3151 -8 -3.4443
1 16 8.31755 -7 -2.47215 0 -1 .00245 1 0 0 0 0 .97215 rect3.dat
2 24 7.702 -6 -1.5 8.32 -6 -1.5
4 16 7.702 -6 -1.5 5.702 -8 -1.5 8.32 -8 -1.5 8.32 -6 -1.5
4 16 5.702 -1.5 -1.5 5.702 -8 -1.5 7.702 -6 -1.5 7.702 -1.5 -1.5
4 16 7.3912 -6 -3.0616 7.702 -6 -1.5 8.32 -6 -1.5 8.3151 -6 -3.4443
1 16 7.5466 -3 -2.2808 0 -1 -.1554 -3 0 0 0 0 -.7808 rect1.dat
1 16 5.6227 -4 -1.8981 0 1 .0793 -4 0 0 0 0 .3981 rect1.dat
2 24 9.9502 7 -24.0214 8 7 -24.6825
5 24 7.3912 0 -3.0616 7.3912 -6 -3.0616 7.702 -6 -1.5 5.6568 -6 -5.6568
5 24 8.3151 -8 -3.4443 8.3151 -6 -3.4443 8.32 -6 -1.5 6.3639 -6 -6.3639

Status:

Needs 2 More Votes (N)

This part has the following automated holds from the Parts Tracker

No path of certified files to a certified or official parent in the parts folder

Current Votes:

None

Official parents and subparts

Part Events:

Gerald Lasser [GeraldLasser]

initially submitted the part.

2025-01-04 21:55:10

...those should need some prims

Rene Rechthaler [Blechtaler]

made the following comment.

2025-01-04 22:23:10

any chance to get a common subfile (or even a prim) for these parts?
-44225.dat (uses prims, but no subfile)
-79505.dat (you used its subfile as base)
-6991.dat (this subfile)
maybe get rid of the outer shell (can get done easily in the main file) and subfile only the quarter inner surface

Creative Commons Attribution License information

Website copyright ©2003-2025 LDraw.org, see Legal Info for details.
LDraw is a completely unofficial, community run free CAD system which represents official parts produced by the LEGO company.
LDraw™ is a trademark owned and licensed by the Estate of James Jessiman
LEGO® is a registered trademark of the LEGO Group, which does not sponsor, endorse, or authorize this site. Visit the official Lego website at http://www.lego.com