Unofficial File parts/s/5924s01.dat
File Header:
0 ~Brick 2 x 2 x 1 Corner Round with Curved Top Half
0 Name: s\5924s01.dat
0 Author: Rene Rechthaler [Blechtaler]
0 !LDRAW_ORG Unofficial_Subpart
0 !LICENSE Licensed under CC BY 4.0 : see CAreadme.txt
0 BFC CERTIFY CCW
Show contents
0 // Outside
1 16 -10 20 10 40 0 0 0 4 0 0 0 -40 48\1-12cyli.dat
1 16 -10 24 10 40 0 0 0 1 0 0 0 -40 48\1-12edge.dat
1 16 23.4791 22 -11.7397 0 -1 1.1609 2 0 0 0 0 1.7397 rect1.dat
1 16 -10 0 10 20 0 0 0 1 0 0 0 -20 48\1-8aring.dat
0 BFC INVERTNEXT
1 16 -10 0 10 20 0 0 0 24 0 0 0 -20 1-8cylo.dat
1 16 -10 24 10 20 0 0 0 -1 0 0 0 -20 1-8tang.dat
1 16 10 20 10 20 0 0 0 0 -20 0 -1 0 1-4chrd.dat
1 16 10 20 10 20 0 0 0 0 -20 0 1 0 1-4edge.dat
2 24 10 24 10 10 0 10
2 24 10 24 10 30 24 10
2 24 30 24 10 30 20 10
5 24 24.64 20 -10 24.64 24 -10 22.3182 24 -13.4794 26.956 24 -5.308
0 // Center Cutout
1 16 20.8792 22 -12.0404 0 0 1.439 2 0 0 0 1 -1.439 rect.dat
4 16 18.284 20 -18.284 15.4556 20 -15.4556 18.5602 20 -11.9152 21.736 20 -14.352
4 16 22.3182 20 -13.4794 21.736 20 -14.352 18.5602 20 -11.9152 19.4402 20 -10.6014
2 24 15.4556 20 -15.4556 18.5602 20 -11.9152
2 24 22.3182 20 -13.4794 21.736 20 -14.352
2 24 19.4402 20 -10.6014 18.5602 20 -11.9152
2 24 18.284 20 -18.284 21.736 20 -14.352
0 // Bottom
1 16 -10 24 10 40 0 0 0 -1 0 0 0 -40 48\1-16chrd.dat
3 16 26 24 2.2962 25.2045 24 6 30 24 10
3 16 26 24 0 26.956 24 -5.308 26 24 -5.5434
3 16 13.2044 24 6 10 24 6.022 10 24 10
3 16 4.142 24 -4.142 7.6191 24 -6 9 24 -9
3 16 26 24 -5.5434 24.64 24 -10 22.2962 24 -5.5434
3 16 26.956 24 -5.308 24.64 24 -10 26 24 -5.5434
4 16 25.5434 24 2.2962 24.7147 24 3.5362 25.2045 24 6 26 24 2.2962
4 16 26 24 2.2962 30 24 10 26.956 24 -5.308 26 24 0
4 16 10 24 10 30 24 10 25.2045 24 6 13.2044 24 6
4 16 12.3093 24 1.5 8.478 24 2.346 10 24 6.022 13.2044 24 6
4 16 6.956 24 -1.33 10.6259 24 -1.5 7.6191 24 -6 4.142 24 -4.142
4 16 6.956 24 -1.33 8.478 24 2.346 12.3093 24 1.5 10.6259 24 -1.5
4 16 10.6259 24 -1.5 12.3093 24 1.5 14 24 1.5 14 24 -1.5
4 16 20.5088 24 -9 9 24 -9 7.6191 24 -6 20 24 -6
4 16 19.4402 24 -10.6014 20.5088 24 -9 24.64 24 -10 22.3182 24 -13.4794
4 16 22.2962 24 -5.5434 24.64 24 -10 20.5088 24 -9 20 24 -6
2 24 20.5088 24 -9 9 24 -9
2 24 13.2044 24 6 25.2045 24 6
2 24 13.2044 24 6 12.3093 24 1.5
2 24 14 24 1.5 12.3093 24 1.5
2 24 14 24 1.5 14 24 -1.5
2 24 10.6259 24 -1.5 14 24 -1.5
2 24 10.6259 24 -1.5 7.6191 24 -6
2 24 20 24 -6 7.6191 24 -6
2 24 22.2962 24 -5.5434 20 24 -6
0 // Stud cutout
1 16 20 24 0 6 0 0 0 -1 0 0 0 -6 3-16tndis.dat
0 BFC INVERTNEXT
1 16 20 20 0 6 0 0 0 4 0 0 0 -6 3-16cylo.dat
1 16 20 20 0 6 0 0 0 -1 0 0 0 -6 3-16chrd.dat
1 16 20 24 0 6 0 0 0 -1 0 0 0 6 1-16tndis.dat
0 BFC INVERTNEXT
1 16 20 20 0 6 0 0 0 4 0 0 0 6 1-16cylo.dat
1 16 20 20 0 6 0 0 0 -1 0 0 0 6 1-16chrd.dat
1 16 25.1291 22 2.9162 -.4144 1 0 0 0 2 .62 0 0 rect2p.dat
5 24 22.2962 20 -5.5434 22.2962 24 -5.5434 20 24 -6 24.2426 24 -4.2426
5 24 25.5434 20 2.2962 25.5434 24 2.2962 26 24 0 24.7147 24 3.5362
0 // Inside
1 16 24.9596 22 4.7681 .2449 1 0 0 0 2 1.2319 0 0 rect3.dat
1 16 19.9745 22 -9.8007 .5343 1 0 0 0 2 .8007 0 0 rect2a.dat
2 24 12.3093 24 1.5 12.3093 4.7954 1.5
2 24 14 24 1.5 14 5.1317 1.5
2 24 13.2044 24 6 13.2044 4.7955 6
2 24 13.2044 4.7955 6 12.3093 4.7954 1.5
2 24 14 5.1317 1.5 12.3093 4.7954 1.5
2 24 7.6191 24 -6 7.6191 4.7956 -6
2 24 10.6259 4.7955 -1.5 7.6191 4.7956 -6
2 24 7.6191 4.7956 -6 10.1243 5.218 -6
2 24 10.1243 5.218 -6 16.2463 8.686 -6
2 24 20 13.4461 -6 16.2463 8.686 -6
2 24 15.3286 5.218 6 13.2044 4.7955 6
2 24 15.3286 5.218 6 20.5183 8.686 6
2 24 23.9869 13.876 6 20.5183 8.686 6
2 24 23.9869 13.876 6 25.2045 20 6
2 24 9 5.7169 -9 14.2416 8.686 -9
2 24 18.3336 13.876 -9 14.2416 8.686 -9
2 24 18.3336 13.876 -9 20.5088 20 -9
2 24 10.6259 4.7955 -1.5 13.1321 5.218 -1.5
2 24 14 5.7096 -1.5 13.1321 5.218 -1.5
2 24 14 5.1317 1.5 14 5.1887 .0583
2 24 14 5.1887 .0583 14 5.218 -.2015
2 24 14 5.218 -.2015 14 5.7096 -1.5
2 24 20.3911 13.876 -5.9222 20 13.4461 -6
2 24 22.0469 20 -5.593 22.2962 20 -5.5434
2 24 20.3911 13.876 -5.9222 22.0469 20 -5.593
2 24 22.0469 20 -5.593 23.26 20 -3.778
2 24 23.26 20 -3.778 24.7147 20 3.5362
2 24 14 5.7096 -1.5 14 24 -1.5
2 24 10.6259 24 -1.5 10.6259 4.7955 -1.5
3 16 20 13.4461 -6 16.2463 8.686 -6 18.93 8.686 -1.984
3 16 14 5.218 -.2015 14 5.1887 .0583 14.136 5.218 0
3 16 12.142 8.686 -12.142 9 5.7169 -9 14.2416 8.686 -9
3 16 18.93 8.686 -1.984 16.2463 8.686 -6 14 5.7096 -1.5
3 16 15.4556 20 -15.4556 14.594 13.876 -14.594 18.5602 20 -11.9152
3 16 19.4402 20 -10.6014 18.3336 13.876 -9 20.5088 20 -9
3 16 13.2044 24 6 15.3286 5.218 6 13.2044 4.7955 6
3 16 24.7147 20 3.5362 23.9869 13.876 6 25.2045 20 6
3 16 13.1321 5.218 -1.5 10.6259 4.7955 -1.5 10.6259 24 -1.5
4 16 14 5.1317 1.5 14 24 1.5 12.3093 24 1.5 12.3093 4.7954 1.5
4 16 13.2044 4.7955 6 12.3093 4.7954 1.5 12.3093 24 1.5 13.2044 24 6
4 16 7.6191 24 -6 10.6259 24 -1.5 10.6259 4.7955 -1.5 7.6191 4.7956 -6
4 16 10.1243 5.218 -6 7.6191 4.7956 -6 10.6259 4.7955 -1.5 13.1321 5.218 -1.5
4 16 14.2416 8.686 -9 18.3336 13.876 -9 14.594 13.876 -14.594 12.142 8.686 -12.142
4 16 20.3911 13.876 -5.9222 20 13.4461 -6 18.93 8.686 -1.984 22.136 13.876 -3.312
4 16 13.2044 4.7955 6 15.3286 5.218 6 14 5.1317 1.5 12.3093 4.7954 1.5
4 16 22.136 13.876 -3.312 18.93 8.686 -1.984 20.5183 8.686 6 23.9869 13.876 6
4 16 14 5.1887 .0583 14 5.1317 1.5 15.3286 5.218 6 14.136 5.218 0
4 16 15.3286 5.218 6 20.5183 8.686 6 18.93 8.686 -1.984 14.136 5.218 0
4 16 13.1321 5.218 -1.5 14 5.7096 -1.5 16.2463 8.686 -6 10.1243 5.218 -6
4 16 18.93 8.686 -1.984 14 5.7096 -1.5 14 5.218 -.2015 14.136 5.218 0
4 16 18.5602 20 -11.9152 14.594 13.876 -14.594 18.3336 13.876 -9 19.4402 20 -10.6014
4 16 22.136 13.876 -3.312 23.26 20 -3.778 22.0469 20 -5.593 20.3911 13.876 -5.9222
4 16 26 20 0 22.2962 20 -5.5434 22.0469 20 -5.593 23.26 20 -3.778
4 16 22.2962 24 -5.5434 20 24 -6 22.0469 20 -5.593 22.2962 20 -5.5434
4 16 22.0469 20 -5.593 20 24 -6 20 13.4461 -6 20.3911 13.876 -5.9222
4 16 13.2044 24 6 25.2045 24 6 25.2045 20 6 23.9869 13.876 6
4 16 13.2044 24 6 23.9869 13.876 6 20.5183 8.686 6 15.3286 5.218 6
4 16 9 24 -9 20.5088 24 -9 20.5088 20 -9 18.3336 13.876 -9
4 16 9 24 -9 18.3336 13.876 -9 14.2416 8.686 -9 9 5.7169 -9
4 16 20 13.4461 -6 20 24 -6 7.6191 24 -6 16.2463 8.686 -6
4 16 10.1243 5.218 -6 16.2463 8.686 -6 7.6191 24 -6 7.6191 4.7956 -6
4 16 10 24 10 10 0 10 30 20 10 30 24 10
4 16 25.5434 20 2.2962 26 20 0 23.26 20 -3.778 24.7147 20 3.5362
4 16 22.136 13.876 -3.312 23.9869 13.876 6 24.7147 20 3.5362 23.26 20 -3.778
4 16 13.1321 5.218 -1.5 10.6259 24 -1.5 14 24 -1.5 14 5.7096 -1.5
4 16 14 5.7096 -1.5 14 24 -1.5 14 24 1.5 14 5.218 -.2015
4 16 14 5.1887 .0583 14 5.218 -.2015 14 24 1.5 14 5.1317 1.5
5 24 18.3336 13.876 -9 14.594 13.876 -14.594 12.142 8.686 -12.142 19.4402 20 -10.6014
5 24 20 13.4461 -6 20 24 -6 20.3911 13.876 -5.9222 7.6191 24 -6
5 24 14.136 5.218 0 14 5.218 -.2015 18.93 8.686 -1.984 14 5.1887 .0583
5 24 15.3286 5.218 6 14.136 5.218 0 14 5.1887 .0583 20.5183 8.686 6
5 24 22.136 13.876 -3.312 23.26 20 -3.778 23.9869 13.876 6 22.0469 20 -5.593
5 24 20.5183 8.686 6 18.93 8.686 -1.984 14.136 5.218 0 23.9869 13.876 6
5 24 18.93 8.686 -1.984 16.2463 8.686 -6 20 13.4461 -6 14 5.7096 -1.5
5 24 14.2416 8.686 -9 12.142 8.686 -12.142 9 5.7169 -9 18.3336 13.876 -9
5 24 20.5088 20 -9 19.4402 20 -10.6014 18.3336 13.876 -9 20.5088 24 -9
5 24 22.136 13.876 -3.312 20.3911 13.876 -5.9222 20 13.4461 -6 23.26 20 -3.778
5 24 18.93 8.686 -1.984 22.136 13.876 -3.312 20.3911 13.876 -5.9222 20.5183 8.686 6
5 24 23.9869 13.876 6 22.136 13.876 -3.312 24.7147 20 3.5362 18.93 8.686 -1.984
5 24 14.136 5.218 0 18.93 8.686 -1.984 14 5.7096 -1.5 15.3286 5.218 6
5 24 10.1243 5.218 -6 13.1321 5.218 -1.5 7.6191 4.7956 -6 14 5.7096 -1.5
5 24 25.2045 20 6 24.7147 20 3.5362 25.2045 24 6 23.9869 13.876 6
5 24 14.594 13.876 -14.594 18.5602 20 -11.9152 15.4556 20 -15.4556 18.3336 13.876 -9
5 24 14 5.1887 .0583 14.136 5.218 0 14 5.1317 1.5 14 5.218 -.2015
Status:
Needs More Votes (CN)
This part has the following automated holds from the Parts Tracker
- No path of certified files to a certified or official parent in the parts folder
Current Votes:
| User | Vote |
|---|---|
| RainbowDolphin | Certify |
Official parents and subparts
Part Events:
found overlap (wanted to use condtool, used triangle)
2025-03-25 19:33:39
the 1-8aring on the top doesn't play well with primitive substitution, but I can't find a better solution at the moment.
2025-03-25 20:07:22
used it because the torus is mixed mode
the outside of the 2x2 corner bricks is hi-res, the inside is normal res...
the outside of the 2x2 corner bricks is hi-res, the inside is normal res...
2025-03-26 19:34:47
Yes, I understand the base reason, just want to see if there could be a better way. Perhaps a thin normal res ring, then aring then torus. But then 5924 wouldn't exactly match curved top brick.
improved triangulation at the bottom
2025-05-20 19:15:42
* Rotated rects
2025-05-24 10:40:29
2025-08-21 11:48:17
bump
Creative Commons Attribution License information
This part is copyright © Rene Rechthaler
Licensed under CC BY 4.0
Edits:
LDraw.org Parts Tracker,
3D View
Website copyright ©2003-2025 LDraw.org, see Legal Info for details.
LDraw is a completely unofficial, community run free CAD system which represents official parts produced by the LEGO company.
LDraw™ is a trademark owned and licensed by the Estate of James Jessiman
LEGO® is a registered trademark of the LEGO Group, which does not sponsor,
endorse, or authorize this site. Visit the official Lego website at
http://www.lego.com
name and structure from 65617