File Detail parts/6428.dat

Official File parts/6428.dat

Part Attributes:

External Sites:

View on Rebrickable View on BrickLink View on Brickset View on BrickOwl

Duplo Panel 1 x 2 x 1.667 Sloped with Embossed Gauges

File Header:

0 Duplo Panel  1 x  2 x  1.667 Sloped with Embossed Gauges
0 Name: 6428.dat
0 Author: Peter Blomberg [WUIt]
0 !LDRAW_ORG Part UPDATE 2025-08
0 !LICENSE Licensed under CC BY 4.0 : see CAreadme.txt

0 BFC CERTIFY CCW

0 !HISTORY 2025-08-31 [OrionP] Official Update 2025-08

Show contents

1 16 0 0 0 -40 0 0 0 1 0 0 0 -20 recte4.dat
0 BFC INVERTNEXT
1 16 0 0 0 -36 0 0 0 -12 0 0 0 -16 box5.dat
1 16 0 -8 20 -40 0 0 0 0 -8 0 -1 0 rect3.dat
1 16 0 -16 16 -40 0 0 0 1 0 0 0 -4 rect3.dat
4 16 -40 -16 20 -40 0 20 -40 0 -20 -40 -16 12
4 16 40 0 -20 40 0 20 40 -16 20 40 -16 12
4 16 -36 0 16 -36 0 -16 -40 0 -20 -40 0 20
4 16 40 0 -20 36 0 -16 36 0 16 40 0 20
4 16 -40 0 -20 -36 0 -16 36 0 -16 40 0 -20
4 16 -36 0 16 -40 0 20 40 0 20 36 0 16
1 16 20 -12 14 1.5 0 0 0 11 0 0 0 -2 box4-1.dat
1 16 -20 -12 14 1.5 0 0 0 11 0 0 0 -2 box4-1.dat
1 16 20 -12 -14 1.5 0 0 0 11 0 0 0 2 box4-1.dat
1 16 -20 -12 -14 1.5 0 0 0 11 0 0 0 2 box4-1.dat
1 16 -34 -12 0 0 0 2 0 11 0 1.5 0 0 box4-1.dat
1 16 34 -12 0 0 0 -2 0 11 0 1.5 0 0 box4-1.dat

2 24 -40 -80 -20 40 -80 -20
2 24 -40 -76.25 -20 40 -76.25 -20
2 24 -40 -63.75 -20 -26 -63.75 -20
2 24 -40 -38.25 -20 -26 -38.25 -20
2 24 -40 -25.75 -20 -26 -25.75 -20
2 24 40 -63.75 -20 26 -63.75 -20
2 24 40 -38.25 -20 26 -38.25 -20
2 24 40 -25.75 -20 26 -25.75 -20
2 24 -26 -60 -20 -26 -63.75 -20
2 24 -26 -42 -20 -26 -38.25 -20
2 24 -26 -16 -20 -26 -25.75 -20
2 24 26 -60 -20 26 -63.75 -20
2 24 26 -42 -20 26 -38.25 -20
2 24 26 -16 -20 26 -25.75 -20
2 24 -26 -60 -20 -36 -60 -20
2 24 -26 -42 -20 -36 -42 -20
2 24 -36 -42 -20 -36 -60 -20
2 24 -26 -16 -20 26 -16 -20
2 24 26 -60 -20 36 -60 -20
2 24 26 -42 -20 36 -42 -20
2 24 36 -42 -20 36 -60 -20

0 BFC INVERTNEXT
1 16 -40 -32 -14.25 0 4 0 6.25 0 0 0 0 6.25 2-4cylo.dat
0 BFC INVERTNEXT
1 16 -40 -70 -14.25 0 80 0 -6.25 0 0 0 0 6.25 1-4cylo.dat
0 BFC INVERTNEXT
1 16 -40 -70 -14.25 0 4 0 6.25 0 0 0 0 6.25 1-4cylo.dat
0 BFC INVERTNEXT
1 16 40 -70 -14.25 0 -4 0 6.25 0 0 0 0 6.25 1-4cylo.dat
0 BFC INVERTNEXT
1 16 40 -32 -14.25 0 -4 0 6.25 0 0 0 0 6.25 2-4cylo.dat

1 16 -40 -32 -14.25 0 1 0 6.25 0 0 0 0 6.25 2-4ndis.dat
1 16 -40 -70 -14.25 0 1 0 6.25 0 0 0 0 6.25 1-4ndis.dat
1 16 40 -70 -14.25 0 -1 0 6.25 0 0 0 0 6.25 1-4ndis.dat
1 16 40 -32 -14.25 0 -1 0 6.25 0 0 0 0 6.25 2-4ndis.dat

1 16 -36 -32 -14.25 0 -1 0 6.25 0 0 0 0 6.25 2-4ndis.dat
1 16 36 -32 -14.25 0 1 0 6.25 0 0 0 0 6.25 2-4ndis.dat
1 16 -36 -70 -14.25 0 -1 0 6.25 0 0 0 0 6.25 1-4ndis.dat
1 16 36 -70 -14.25 0 1 0 6.25 0 0 0 0 6.25 1-4ndis.dat

2 24 -40 0 -20 -40 -25.75 -20
2 24 -40 -25.75 -20 -40 -25.75 -14.25
2 24 -40 -38.25 -14.25 -40 -38.25 -20
2 24 -40 -38.25 -20 -40 -63.75 -20
2 24 -40 -63.75 -14.25 -40 -63.75 -20
2 24 -40 -76.25 -20 -40 -80 -20
2 24 -40 -76.25 -20 -40 -76.25 -14.25
2 24 -40 -80 -20 -40 -80 -14

2 24 40 0 -20 40 -25.75 -20
2 24 40 -25.75 -20 40 -25.75 -14.25
2 24 40 -38.25 -14.25 40 -38.25 -20
2 24 40 -38.25 -20 40 -63.75 -20
2 24 40 -63.75 -14.25 40 -63.75 -20
2 24 40 -76.25 -20 40 -80 -20
2 24 40 -76.25 -20 40 -76.25 -14.25
2 24 40 -80 -20 40 -80 -14

4 16 -40 -80 -20 40 -80 -20 40 -80 -14 -40 -80 -14
1 16 -40 -70 -14 0 80 0 -10 0 0 0 0 10 3-16cylo.dat
2 24 -40 -16 12 -40 -73.827 -4.761
2 24 40 -16 12 40 -73.827 -4.761

3 16 -40 0 -20 -40 -25.75 -20 -40 -25.75 -14.25
4 16 -40 -25.75 -14.25 -40 -25.75 -8 -40 -16 12 -40 0 -20
3 16 -40 -16 12 -40 -25.75 -8 -40 -32 -8
4 16 -40 -63.75 -14.25 -40 -38.25 -14.25 -40 -38.25 -20 -40 -63.75 -20
4 16 -40 -63.75 -8 -40 -38.25 -8 -40 -38.25 -14.25 -40 -63.75 -14.25
4 16 -40 -76.25 -20 -40 -80 -20 -40 -80 -14 -40 -76.25 -14.25
3 16 -40 -16 12 -40 -32 -8 -40 -38.25 -8
3 16 -40 -16 12 -40 -38.25 -8 -40 -63.75 -8
4 16 -40 -73.827 -4.761 -40 -16 12 -40 -63.75 -8 -40 -70 -8

3 16 40 -25.75 -20 40 0 -20 40 -25.75 -14.25
4 16 40 -16 12 40 -25.75 -8 40 -25.75 -14.25 40 0 -20
3 16 40 -25.75 -8 40 -16 12 40 -32 -8
4 16 40 -38.25 -20 40 -38.25 -14.25 40 -63.75 -14.25 40 -63.75 -20
4 16 40 -38.25 -14.25 40 -38.25 -8 40 -63.75 -8 40 -63.75 -14.25
4 16 40 -76.25 -20 40 -76.25 -14.25 40 -80 -14 40 -80 -20
3 16 40 -32 -8 40 -16 12 40 -38.25 -8
3 16 40 -38.25 -8 40 -16 12 40 -63.75 -8
4 16 40 -63.75 -8 40 -16 12 40 -73.827 -4.761 40 -70 -8

4 16 -26 -16 -20 -26 -25.75 -20 -40 -25.75 -20 -40 0 -20
4 16 -26 -16 -20 -40 0 -20 40 0 -20 26 -16 -20
4 16 40 -25.75 -20 26 -25.75 -20 26 -16 -20 40 0 -20
4 16 -36 -42 -20 -40 -38.25 -20 -26 -38.25 -20 -26 -42 -20
4 16 -36 -60 -20 -40 -63.75 -20 -40 -38.25 -20 -36 -42 -20
4 16 -40 -63.75 -20 -36 -60 -20 -26 -60 -20 -26 -63.75 -20
4 16 -40 -76.25 -20 40 -76.25 -20 40 -80 -20 -40 -80 -20
4 16 26 -38.25 -20 40 -38.25 -20 36 -42 -20 26 -42 -20
4 16 40 -38.25 -20 40 -63.75 -20 36 -60 -20 36 -42 -20
4 16 26 -60 -20 36 -60 -20 40 -63.75 -20 26 -63.75 -20

2 24 26 -25.75 -20 26 -25.75 5.1111
2 24 26 -16 -20 26 -16 8
2 24 36 -25.75 -14.25 36 -25.75 -8
2 24 36 -25.75 -8 36 -25.75 5.1111
2 24 36 -38.25 -14.25 36 -38.25 -8
2 24 36 -38.25 -8 36 -38.25 1.4074
2 24 26 -38.25 -20 26 -38.25 1.4074
2 24 26 -42 -20 26 -42 .2963
2 24 36 -42 -20 36 -42 .2963
2 24 36 -60 -20 36 -60 -5.037
2 24 26 -60 -20 26 -60 -5.037
2 24 26 -63.75 -20 26 -63.75 -6.1481
2 24 36 -63.75 -14.25 36 -63.75 -8
2 24 36 -63.75 -8 36 -63.75 -6.1481
2 24 26 -16 8 26 -25.75 5.1111
2 24 26 -25.75 5.1111 36 -25.75 5.1111
2 24 36 -25.75 5.1111 36 -38.25 1.4074
2 24 36 -38.25 1.4074 26 -38.25 1.4074
2 24 26 -38.25 1.4074 26 -42 .2963
2 24 26 -42 .2963 36 -42 .2963
2 24 36 -42 .2963 36 -60 -5.037
2 24 36 -60 -5.037 26 -60 -5.037
2 24 26 -60 -5.037 26 -63.75 -6.1481
2 24 26 -63.75 -6.1481 36 -63.75 -6.1481
2 24 36 -63.75 -6.1481 36 -70 -8

4 16 26 -16 8 26 -16 -20 26 -25.75 -20 26 -25.75 5.1111
4 16 40 -25.75 -14.25 36 -25.75 -14.25 26 -25.75 -20 40 -25.75 -20
4 16 36 -25.75 -8 36 -25.75 5.1111 26 -25.75 5.1111 26 -25.75 -20
3 16 36 -25.75 -8 26 -25.75 -20 36 -25.75 -14.25
4 16 36 -25.75 5.1111 36 -25.75 -8 36 -32 -8 36 -38.25 1.4074
3 16 36 -38.25 1.4074 36 -32 -8 36 -38.25 -8
4 16 36 -38.25 -14.25 40 -38.25 -14.25 40 -38.25 -20 26 -38.25 -20
4 16 36 -38.25 -14.25 26 -38.25 -20 26 -38.25 1.4074 36 -38.25 -8
3 16 36 -38.25 -8 26 -38.25 1.4074 36 -38.25 1.4074
4 16 26 -42 .2963 26 -38.25 1.4074 26 -38.25 -20 26 -42 -20
4 16 36 -42 -20 36 -42 .2963 26 -42 .2963 26 -42 -20
4 16 36 -42 .2963 36 -42 -20 36 -60 -20 36 -60 -5.037
4 16 26 -60 -5.037 36 -60 -5.037 36 -60 -20 26 -60 -20
4 16 26 -60 -5.037 26 -60 -20 26 -63.75 -20 26 -63.75 -6.1481
4 16 26 -63.75 -20 40 -63.75 -20 40 -63.75 -14.25 36 -63.75 -14.25
4 16 26 -63.75 -6.1481 26 -63.75 -20 36 -63.75 -14.25 36 -63.75 -8
3 16 26 -63.75 -6.1481 36 -63.75 -8 36 -63.75 -6.1481
3 16 36 -63.75 -6.1481 36 -63.75 -8 36 -70 -8

4 16 -40 -73.827 -4.761 40 -73.827 -4.761 40 -16 12 -40 -16 12
2 24 26 -16 8 -26 -16 8
4 16 -26 -16 -20 26 -16 -20 26 -16 8 -26 -16 8

4 16 -26 -25.75 -20 -26 -16 -20 -26 -16 8 -26 -25.75 5.1111
4 16 -26 -25.75 -20 -36 -25.75 -14.25 -40 -25.75 -14.25 -40 -25.75 -20
4 16 -26 -25.75 5.1111 -36 -25.75 5.1111 -36 -25.75 -8 -26 -25.75 -20
3 16 -26 -25.75 -20 -36 -25.75 -8 -36 -25.75 -14.25
4 16 -36 -32 -8 -36 -25.75 -8 -36 -25.75 5.1111 -36 -38.25 1.4074
3 16 -36 -32 -8 -36 -38.25 1.4074 -36 -38.25 -8
4 16 -40 -38.25 -20 -40 -38.25 -14.25 -36 -38.25 -14.25 -26 -38.25 -20
4 16 -26 -38.25 1.4074 -26 -38.25 -20 -36 -38.25 -14.25 -36 -38.25 -8
3 16 -26 -38.25 1.4074 -36 -38.25 -8 -36 -38.25 1.4074
4 16 -26 -38.25 -20 -26 -38.25 1.4074 -26 -42 .2963 -26 -42 -20
4 16 -26 -42 .2963 -36 -42 .2963 -36 -42 -20 -26 -42 -20
4 16 -36 -60 -20 -36 -42 -20 -36 -42 .2963 -36 -60 -5.037
4 16 -36 -60 -20 -36 -60 -5.037 -26 -60 -5.037 -26 -60 -20
4 16 -26 -63.75 -20 -26 -60 -20 -26 -60 -5.037 -26 -63.75 -6.1481
4 16 -40 -63.75 -14.25 -40 -63.75 -20 -26 -63.75 -20 -36 -63.75 -14.25
4 16 -36 -63.75 -14.25 -26 -63.75 -20 -26 -63.75 -6.1481 -36 -63.75 -6.1481
3 16 -36 -63.75 -8 -26 -63.75 -6.1481 -36 -63.75 -6.1481
3 16 -36 -63.75 -8 -36 -63.75 -6.1481 -36 -70 -8

2 24 -26 -25.75 -20 -26 -25.75 5.1111
2 24 -26 -16 -20 -26 -16 8
2 24 -36 -25.75 -14.25 -36 -25.75 -8
2 24 -36 -25.75 -8 -36 -25.75 5.1111
2 24 -36 -38.25 -14.25 -36 -38.25 -8
2 24 -36 -38.25 -8 -36 -38.25 1.4074
2 24 -26 -38.25 -20 -26 -38.25 1.4074
2 24 -26 -42 -20 -26 -42 .2963
2 24 -36 -42 -20 -36 -42 .2963
2 24 -36 -60 -20 -36 -60 -5.037
2 24 -26 -60 -20 -26 -60 -5.037
2 24 -26 -63.75 -20 -26 -63.75 -6.1481
2 24 -36 -63.75 -14.25 -36 -63.75 -8
2 24 -36 -63.75 -8 -36 -63.75 -6.1481
2 24 -26 -16 8 -26 -25.75 5.1111
2 24 -26 -25.75 5.1111 -36 -25.75 5.1111
2 24 -36 -25.75 5.1111 -36 -38.25 1.4074
2 24 -36 -38.25 1.4074 -26 -38.25 1.4074
2 24 -26 -38.25 1.4074 -26 -42 .2963
2 24 -26 -42 .2963 -36 -42 .2963
2 24 -36 -42 .2963 -36 -60 -5.037
2 24 -36 -60 -5.037 -26 -60 -5.037
2 24 -26 -60 -5.037 -26 -63.75 -6.1481
2 24 -26 -63.75 -6.1481 -36 -63.75 -6.1481
2 24 -36 -63.75 -6.1481 -36 -70 -8

4 16 40 -76.25 -14.25 40 -76.25 -20 -40 -76.25 -20 -40 -76.25 -14.25

0 // Gauge bases
0 BFC INVERTNEXT
1 16 0 -29 4.1481 0 0 -8 8 0 0 0 -2.3703 0 1-4cyls2.dat
0 BFC INVERTNEXT
1 16 0 -29 4.1481 0 0 8 8 0 0 0 -2.3703 0 1-4cyls2.dat
1 16 0 -29 3.241 0 0 -8 8 0 0 0 3.3 0 5-16cyli.dat
1 16 0 -29 3.241 0 0 8 8 0 0 0 3.3 0 5-16cyli.dat

0 BFC INVERTNEXT
1 16 15 -51 -2.3703 0 0 -8 8 0 0 0 -2.3703 0 1-4cyls2.dat
0 BFC INVERTNEXT
1 16 15 -51 -2.3703 0 0 8 8 0 0 0 -2.3703 0 1-4cyls2.dat
1 16 15 -51 -3.2775 0 0 -8 8 0 0 0 3.3 0 5-16cyli.dat
1 16 15 -51 -3.2775 0 0 8 8 0 0 0 3.3 0 5-16cyli.dat

0 BFC INVERTNEXT
1 16 -15 -51 -2.3703 0 0 -8 8 0 0 0 -2.3703 0 1-4cyls2.dat
0 BFC INVERTNEXT
1 16 -15 -51 -2.3703 0 0 8 8 0 0 0 -2.3703 0 1-4cyls2.dat
1 16 -15 -51 -3.2775 0 0 -8 8 0 0 0 3.3 0 5-16cyli.dat
1 16 -15 -51 -3.2775 0 0 8 8 0 0 0 3.3 0 5-16cyli.dat

4 16 -36 -38.25 1.4074 -36 -25.75 5.1111 -26 -25.75 5.1111 -26 -38.25 1.4074
4 16 26 -25.75 5.1111 36 -25.75 5.1111 36 -38.25 1.4074 26 -38.25 1.4074
3 16 -36 -63.75 -6.1481 -26 -63.75 -6.1481 -36 -70 -8
3 16 26 -63.75 -6.1481 36 -63.75 -6.1481 36 -70 -8
4 16 -26 -63.75 -6.1481 26 -63.75 -6.1481 36 -70 -8 -36 -70 -8

0 // Gauge top left
1 16 -15 -51 -3.2775 1 0 0 0 1 0 0 0 1 s\6428s01.dat

0 // Gauge top right
1 16 15 -51 -3.2775 1 0 0 0 -1 0 0 0 1 s\6428s01.dat

0 // Gauge middle bottom
1 16 0 -29 3.241 1 0 0 0 1 0 0 0 1 s\6428s02.dat

1 16 15 -51 -2.3703 8 0 0 0 0 8 0 1 2.3703 4-4ndis.dat
1 16 -15 -51 -2.3703 8 0 0 0 0 8 0 1 2.3703 4-4ndis.dat
1 16 0 -29 4.1481 8 0 0 0 0 8 0 1 2.3703 4-4ndis.dat
1 16 15 -51 -2.3703 8 0 0 0 0 8 0 1 2.3703 4-4edge.dat
1 16 -15 -51 -2.3703 8 0 0 0 0 8 0 1 2.3703 4-4edge.dat
1 16 0 -29 4.1481 8 0 0 0 0 8 0 1 2.3703 4-4edge.dat
4 16 26 -16 8 26 -25.75 5.1111 8 -29 4.1481 8 -21 6.5184
4 16 26 -25.75 5.1111 26 -38.25 1.4074 8 -37 1.7778 8 -29 4.1481
4 16 -26 -16 8 -8 -21 6.5184 -8 -29 4.1481 -26 -25.75 5.1111
4 16 -26 -25.75 5.1111 -8 -29 4.1481 -8 -37 1.7778 -26 -38.25 1.4074
4 16 -8 -37 1.7778 -15 -43 0 -23 -43 0 -26 -38.25 1.4074
4 16 -26 -38.25 1.4074 -23 -43 0 -23 -51 -2.3703 -26 -42 .2963
4 16 -26 -42 .2963 -23 -51 -2.3703 -36 -60 -5.037 -36 -42 .2963
4 16 -36 -60 -5.037 -23 -51 -2.3703 -23 -59 -4.7406 -26 -60 -5.037
4 16 -26 -60 -5.037 -23 -59 -4.7406 -15 -59 -4.7406 -26 -63.75 -6.1481
3 16 -26 -63.75 -6.1481 -15 -59 -4.7406 -7 -59 -4.7406
4 16 -15 -43 0 -8 -37 1.7778 0 -37 1.7778 -7 -43 0
4 16 -7 -43 0 0 -37 1.7778 8 -37 1.7778 7 -43 0
4 16 26 -38.25 1.4074 15 -43 0 7 -43 0 8 -37 1.7778
4 16 15 -43 0 26 -38.25 1.4074 26 -42 .2963 23 -43 0
4 16 23 -43 0 26 -42 .2963 36 -42 .2963 23 -51 -2.3703
3 16 23 -51 -2.3703 36 -42 .2963 36 -60 -5.037
4 16 36 -60 -5.037 26 -60 -5.037 23 -59 -4.7406 23 -51 -2.3703
4 16 26 -60 -5.037 26 -63.75 -6.1481 15 -59 -4.7406 23 -59 -4.7406
3 16 15 -59 -4.7406 26 -63.75 -6.1481 7 -59 -4.7406
4 16 -7 -59 -4.7406 7 -59 -4.7406 26 -63.75 -6.1481 -26 -63.75 -6.1481
4 16 -7 -59 -4.7406 -7 -51 -2.3703 7 -51 -2.3703 7 -59 -4.7406
4 16 -7 -51 -2.3703 -7 -43 0 7 -43 0 7 -51 -2.3703
3 16 -8 -21 6.5184 -26 -16 8 0 -21 6.5184
4 16 8 -21 6.5184 0 -21 6.5184 -26 -16 8 26 -16 8

5 24 40 -73.827 -4.761 -40 -73.827 -4.761 -40 -77.071 -6.929 -40 -16 12

1 16 -40 -70 -14 0 1 0 -10 0 0 0 0 10 3-16chrd.dat
1 16 -40 -70 -14.25 0 1 0 -6.25 0 0 0 0 6.25 1-8tndis.dat
1 16 -40 -70 -14.25 0 1 0 0 0 -6.25 6.25 0 0 1-8tndis.dat
3 16 -40 -73.827 -4.761 -40 -70 -8 -40 -74.419 -8
3 16 -40 -74.419 -8 -40 -74.419 -9.831 -40 -76.25 -9.831
3 16 -40 -73.827 -4.761 -40 -74.419 -8 -40 -76.25 -9.831
3 16 -40 -73.827 -4.761 -40 -76.25 -9.831 -40 -80 -14
3 16 -40 -80 -14 -40 -76.25 -9.831 -40 -76.25 -14.25

1 16 40 -70 -14 0 -1 0 -10 0 0 0 0 10 3-16chrd.dat
1 16 40 -70 -14.25 0 -1 0 -6.25 0 0 0 0 6.25 1-8tndis.dat
1 16 40 -70 -14.25 0 -1 0 0 0 -6.25 6.25 0 0 1-8tndis.dat
3 16 40 -70 -8 40 -73.827 -4.761 40 -74.419 -8
3 16 40 -74.419 -9.831 40 -74.419 -8 40 -76.25 -9.831
3 16 40 -74.419 -8 40 -73.827 -4.761 40 -76.25 -9.831
3 16 40 -76.25 -9.831 40 -73.827 -4.761 40 -80 -14
3 16 40 -76.25 -9.831 40 -80 -14 40 -76.25 -14.25

Status:

Official

Unofficial parents

Part Events:

Archived Part Events:

Peter Blomberg [WUIt]

initially submitted the part.

2025-03-11 06:55:45

Peter Blomberg [WUIt]

submitted a new version of the part.

2025-03-11 06:57:47

Corrected color from 24 to 16 on a few surfaces.

Magnus Forsberg [MagFors]

edited the part header.

2025-03-11 17:25:13

Header Edits

keywords:

to

description:
Duplo Panel 1 x 2 x 1 2/3 Sloped with Embossed Gauges
to
Duplo Panel 1 x 2 x 1.667 Sloped with Embossed Gauges

Comment:
Don't use fractions in the descriptions. It's most often written .333 or .667

Where are the Embossed Gauges? Should be on the inside.
Maybe turn it aound to make the guages visible?

Rene Rechthaler [Blechtaler]

made the following comment.

2025-03-11 17:59:14

gauges are visible here:
https://www.bricklink.com/v2/catalog/catalogitem.page?P=6428#T=C
i am ok with the gauges not being modeled, but should at least the flat gauge bases in the slope get modeled?
do the 5mm Duplo hoses fit? (these arent done yet)
that depends on the standard viewing perspective: what is front, slope or clips? usage is mostly sideways...

Orion Pobursky [OrionP]

posted a vote of Hold.

2025-03-11 20:04:46

Gauges should be modeled.

Rene Rechthaler [Blechtaler]

made the following comment.

2025-03-11 20:42:41

the corresponding hose is this one: 58498
http://www.digital-bricks.de/en/index.php?site=lddp&mg=90
part itself says 6425 (but maybe thats just the front part)
BL has them as 6425c0X (different colors)

Peter Blomberg [WUIt]

made the following comment.

2025-03-12 00:37:58

The gauges present an additional challenge. Will deal with later (as in not today, maybe tomorrow). The part will be rotated.

The important point right now is the size of the grips. The grips on the physical part are a tiny bit smaller than a regular Duplo figure hand and do not have the strong snap feature of a regular hand. Some of the Duplo hoses are rubbery with a beads-on-a-string type of profile and would fit well to the 6 LDU radius previously modeled. Utensils can also be placed into the grips, but the fit is very tight. There are very few utensils modeled. Antennae (51708 and 31925), fences (12602 and 2214), and doors (18816 and 98459) have radius 6 LDU while the only real utensil I found (58086) has radius 6.25 LDU. These parts should be the same size and fit well with physical Duplo hands. The child hand (47198) and the adult hands (47380 and 47389) have radius 6.5 LDU. While it is not exactly meant for it, I can increase the radius to 6.25 on this part to accommodate utensils also in the digital world.

Peter Blomberg [WUIt]

submitted a new version of the part.

2025-03-12 14:56:48

Changed grip radius to 6.25 to accommodate utensils and 5 mm Duplo hoses. Modeled gauge bases and rotated part to show them. Implemented embossing as lines on surface, i.e. no 3D depth. Embossing depth can be added, but with much increased number of lines.

Orion Pobursky [OrionP]

posted a vote of Hold.

2025-03-12 16:24:30

Embossing depth should be added. Line drawing will not show up on a 3D render.

Magnus Forsberg [MagFors]

made the following comment.

2025-03-12 16:39:53

You allready have a good shape in the subfile.
Add an edge line between the inner and outershape.
Lift/move that line by .25 ldu.
Add surfaces, remove the added edgelines, and slap some condlines on it.

Rene Rechthaler [Blechtaler]

made the following comment.

2025-03-12 17:47:58

should this use slanted 4-4ndis around the dials?

Peter Blomberg [WUIt]

submitted a new version of the part.

2025-03-14 23:07:31

Added 3D embossing. The second subfile could still be inlined into the main file. However, this way makes it easier to edit out for personal use.
The approach suggested by [MagFors] doesn't work because the embossing goes into the surface, not protruding out of it. The surface behind the pattern must be broken into pieces and this adds a lot of quads and triangles.
Adding ndis:es around the gauges doesn't cut down the total amount of quads as the ndis:es contain a lot of triangles and many are needed to fill up the areas in between. All it would do is to introduce new nodes that are not connected to any edge line.

Rene Rechthaler [Blechtaler]

made the following comment.

2025-03-14 23:18:04

still think you could use sloped 4-4ndis around the bases of the gauges, would reduce the code a bit...

Rene Rechthaler [Blechtaler]

posted a vote of Hold.

2025-03-14 23:35:23

found an overlap:
4 16 -26 -38.25 1.4074 -26 -38.25 -20 -36 -38.25 -14.25 -36 -38.25 1.4074
3 16 -26 -38.25 1.4074 -36 -38.25 -8 -36 -38.25 1.4074
lines 186+187
and you dont use edge prims now, could use something like that:
(fill the inside again with triangles and quads)
1 16 15 -51 -2.3703 8 0 0 0 0 8 0 1 2.3703 4-4ndis.dat
1 16 15 -51 -2.3703 8 0 0 0 0 8 0 1 2.3703 4-4edge.dat
1 16 -15 -51 -2.3703 8 0 0 0 0 8 0 1 2.3703 4-4ndis.dat
1 16 -15 -51 -2.3703 8 0 0 0 0 8 0 1 2.3703 4-4edge.dat
1 16 0 -29 4.1481 8 0 0 0 0 8 0 1 2.3703 4-4ndis.dat
1 16 0 -29 4.1481 8 0 0 0 0 8 0 1 2.3703 4-4edge.dat
looks like there are no correct cyls prims for now, but that isnt that critical.

Peter Blomberg [WUIt]

submitted a new version of the part.

2025-03-16 11:57:27

Thanks Rene for finding the overlap and providing the slanted prims.

Willy Tschager [Holly-Wood]

made the following comment.

2025-08-10 08:30:39

* Missing complementary:

2 25 40 -73.827 -4.761 -40 -73.827 -4.761

* I'd say the hands are a tiny bit longer:

https://rebrickable.com/media/parts/photos/4/6428-4-5b9def6b-4dac-44e7-bcd2-dc4b0aaf2a8e.jpg

Peter Blomberg [WUIt]

made the following comment.

2025-08-10 11:58:46

What do you consider a "hand" on this part?

Willy Tschager [Holly-Wood]

made the following comment.

2025-08-11 13:20:21

2 25 -15.7071 -50.2929 -3.2775 -12.0757 -53.9243 -3.2775
2 25 14.2929 -51.7071 -3.2775 17.9243 -48.0757 -3.2775

Peter Blomberg [WUIt]

submitted a new version of the part.

2025-08-11 20:56:39

Added complementary cond line to parent as suggested.
Increased length of clock pointer in subfile. Used more prims as suggested.

Rene Rechthaler [Blechtaler]

made the following comment.

2025-08-11 21:08:30

does the top 3-16cylo need an 3-16ering.dat?

Willy Tschager [Holly-Wood]

made the following comment.

2025-08-12 10:14:46

* A tndis could do the job:

1 273 -40 -70 -14 0 1 0 -10 0 0 0 0 10 3-16chrd.dat
1 273 -40 -70 -14.25 0 1 0 -6.25 0 0 0 0 6.25 1-8tndis.dat
1 273 -40 -70 -14.25 0 1 0 0 0 -6.25 6.25 0 0 1-8tndis.dat
3 273 -40 -73.827 -4.761 -40 -70 -8 -40 -74.419 -8
3 273 -40 -74.419 -8 -40 -74.419 -9.831 -40 -76.25 -9.831
3 273 -40 -73.827 -4.761 -40 -74.419 -8 -40 -76.25 -9.831
3 273 -40 -73.827 -4.761 -40 -76.25 -9.831 -40 -80 -14
3 273 -40 -80 -14 -40 -76.25 -9.831 -40 -76.25 -14.25
3 273 -40 -80 -14 -40 -76.25 -14.25 -40 -80 -20

Peter Blomberg [WUIt]

submitted a new version of the part.

2025-08-13 19:04:49

Fixed top 3-16 to use more prims at ends as suggested.

Willy Tschager [Holly-Wood]

posted a vote of Certify.

2025-08-14 11:41:02

Takeshi Takahashi [RainbowDolphin]

posted a vote of Certify.

2025-08-14 12:48:33

Gerald Lasser [GeraldLasser]

posted a vote of Admin Review.