File Detail parts/s/7813s01.dat

Unofficial File parts/s/7813s01.dat

~Brick 4 x 5 with Rounded Plate End, 2 x 2 Recess, Axlehole and Pin Holes - Half

File Header:

0 ~Brick  4 x  5 with Rounded Plate End,  2 x  2 Recess, Axlehole and Pin Holes - Half
0 Name: s\7813s01.dat
0 Author: Rene Rechthaler [Blechtaler]
0 !LDRAW_ORG Unofficial_Subpart
0 !LICENSE Licensed under CC BY 4.0 : see CAreadme.txt

0 BFC CERTIFY CCW

Show contents

0 // round plate end
1 16 20 16 40 1 0 0 0 1 0 0 0 -1 s\7904s01.dat
1 16 20 16 40 0 0 -1 0 1 0 1 0 0 s\7904s01.dat
3 16 28.2843 20 48.2843 36 20 24 4 20 56
3 16 40 16 20 28.2843 16 48.2843 0 16 60

0 // side brick
2 24 40 16 20 40 0 20
2 24 40 0 20 40 0 -40
2 24 40 0 20 20 0 20
2 24 20 0 -20 28 0 -20
4 16 40 16 20 20 8 20 20 0 20 40 0 20
4 16 40 0 20 20 0 20 20 0 -20 28 0 -20
4 16 40 0 20 28 0 -20 28 0 -22 40 0 -40
4 16 40 0 20 40 0 -40 40 24 -40 40 16 20
3 16 40 16 20 40 24 -40 40 24 20
2 24 36 20 16 36 4 16
2 24 36 4 16 36 4 -36
2 24 36 4 -36 36 24 -36
4 16 36 4 -36 36 4 16 36 20 16 36 24 -36
4 16 36 24 24 36 24 -36 36 20 16 36 20 24
1 16 38 24 -8 0 0 2 0 -1 0 30 0 -2 rect2p.dat
2 24 36 4 -36 29 4 -36
2 24 36 4 16 26.7641 4 16
4 16 36 4 -36 36 24 -36 29 19 -36 29 10 -36
3 16 36 4 -36 29 10 -36 29 4 -36
4 16 36 4 -36 29 4 -36 29 4 -18 36 4 16
4 16 29 4 -18 27.6024 4 -18 24 4 -13.2359 36 4 16
4 16 24 4 -13.2359 24 4 13.2359 26.7641 4 16 36 4 16
4 16 36 4 16 26.7641 4 16 26.7641 12 16 36 20 16

0 // center cutout
1 16 20 4 0 0 1 0 4 0 0 0 0 20 rect.dat
3 16 20 8 20 0 8 6 6 8 6
4 16 20 8 -20 20 8 20 6 8 6 6 8 0
4 16 12 8 -20 20 8 -20 6 8 0 6 8 -6
4 16 0 8 -6 5.6023 8 -20 12 8 -20 6 8 -6
3 16 5.6023 8 -20 0 8 -6 4 8 -20
2 24 20 8 -20 12 8 -20

1 16 24 8 0 0 -1 0 4 0 0 0 0 13.2359 rect.dat
4 16 26.7641 12 16 24 12 13.2359 8 12 8 0 12 8
4 16 8 12 8 24 12 13.2359 24 12 -13.2359 8 12 0
3 16 8 12 0 24 12 -13.2359 8 12 -8
4 16 11.3977 12 -18 8 12 -8 24 12 -13.2359 27.6024 12 -18
2 24 27.6024 12 -18 11.3977 12 -18
3 16 8 12 -8 11.3977 12 -18 7.6023 12 -18
4 16 5.6023 12 -18 0 12 -8 8 12 -8 7.6023 12 -18
1 16 9.5 12 -21 1.8977 0 0 0 -1 0 0 0 -3 rect3.dat

0 // front technic brick
1 16 20 10 -40 8 0 0 0 0 8 0 1 0 4-4ndis.dat
1 16 20 10 -40 1 0 0 0 0 1 0 1 0 peghole.dat
0 BFC INVERTNEXT
1 16 20 10 -38 6 0 0 0 0 6 0 16 0 4-4cyli.dat
1 16 20 10 -20 1 0 0 0 0 1 0 -1 0 peghole5.dat
1 16 20 10 -20 8 0 0 0 0 8 0 1 0 2-4chrd.dat
4 16 12 8 -20 12 10 -20 28 10 -20 20 8 -20
4 16 20 8 -20 28 10 -20 28 0 -20 20 0 -20
1 16 20 10 -36 9 0 0 0 0 9 0 -1 0 2-4ndis.dat
1 16 20 10 -18 9 0 0 0 0 9 0 -18 0 2-4cylc.dat
1 16 28.3012 7 -27 0 .6988 0 -3 0 0 0 0 9 box2-7p.dat

1 16 0 10 -20 6 0 0 0 0 -6 0 -1 0 1-4ndis.dat
1 16 0 10 -40 0 0 6 6 0 0 0 1 0 1-16chrd.dat
2 24 0 16 -40 2 15.6023 -40
2 24 0 16 -36 2 15.6023 -36
2 24 2 15.6023 -40 2 15.6023 -36

4 16 2 15.6023 -36 0 16 -36 0 16 -40 2 15.6023 -40
0 BFC INVERTNEXT
1 16 9.5 10 -30 1.5 0 0 0 -6 0 0 0 6 box5-4a.dat
4 16 11 10 -24 8 10 -24 7.6023 12 -24 11.3977 12 -24
2 24 7.6023 12 -24 8 10 -24
2 24 11 10 -24 11.3977 12 -24

1 16 0 10 -36 8 0 0 0 0 8 0 -1 0 1-8tndis.dat
1 16 0 10 -18 8 0 0 0 0 8 0 -18 0 1-8cylo.dat
3 16 2 24 -36 0 16 -36 2 15.6023 -36
4 16 2 16 -25.6024 2 24 -25.6024 2 24 -36 2 15.6023 -36
4 16 2 15.6023 -36 2 15.6023 -20 2 16 -20 2 16 -25.6024
2 24 2 24 -36 2 24 -25.6024

2 24 2 16 -25.6024 2 16 -20
2 24 2 15.6023 -20 2 16 -20
4 16 2.2962 16 -25.5434 2 16 -25.6024 2 16 -20 6 16 -20
3 16 6 16 -20 2 16 -20 5.6023 16 -18
2 24 6 16 -20 5.6023 16 -18

2 24 2 15.6023 -36 2 24 -36
2 24 5.7574 15.5063 -36 5.7574 15.5063 -25.7574
2 24 5.7574 15.5063 -36 5.7574 24 -36
2 24 5.7574 24 -36 5.7574 24 -34.2426
2 24 5.7574 24 -34.2426 5.7574 20 -34.2426
2 24 5.7574 15.5063 -25.7574 5.7574 20 -25.7574
3 16 29 19 -36 36 24 -36 20 19 -36
4 16 36 24 -36 5.7574 24 -36 11 19 -36 20 19 -36
4 16 5.7574 24 -36 5.6568 15.6568 -36 8 15.6568 -36 11 19 -36
4 16 11 10 -36 11 19 -36 8 15.6568 -36 8 10 -36
4 16 5.7574 24 -36 5.7574 24 -34.2426 5.7574 20 -34.2426 5.7574 15.5063 -36
4 16 5.7574 15.5063 -25.7574 5.7574 15.5063 -36 5.7574 20 -34.2426 5.7574 20 -25.7574

4 16 5.7574 20 -25.7574 7.3912 24 -23.0616 7.3912 12 -23.0616 5.7574 15.5063 -25.7574
3 16 5.7574 24 -25.7574 7.3912 24 -23.0616 5.7574 20 -25.7574
2 24 5.7574 24 -25.7574 7.3912 24 -23.0616
2 24 5.7574 15.5063 -25.7574 7.3912 13.0616 -23.0616
2 24 7.3912 13.0616 -23.0616 7.6023 12 -22
0 BFC INVERTNEXT
1 16 10 20 -30 -6 0 0 0 4 0 0 0 6 1-8cylo.dat
0 BFC INVERTNEXT
1 16 10 20 -30 -6 0 0 0 4 0 0 0 -6 1-8cylo.dat
1 16 10 20 -30 -6 0 0 0 -1 0 0 0 6 1-8chrd.dat
1 16 10 20 -30 -6 0 0 0 -1 0 0 0 -6 1-8chrd.dat
1 16 10 24 -30 -6 0 0 0 -1 0 0 0 6 1-8tndis.dat
1 16 10 24 -30 -6 0 0 0 -1 0 0 0 -6 1-8tndis.dat
2 24 5.7574 20 -34.2426 5.7574 20 -25.7574
3 16 5.7574 20 -34.2426 4 20 -30 5.7574 20 -25.7574
3 16 0 24 -40 2 24 -36 5.7574 24 -36
4 16 4 24 -34.2426 5.7574 24 -34.2426 5.7574 24 -36 2 24 -36
4 16 4 24 -34.2426 2 24 -36 2 24 -25.6024 4 24 -30
3 16 4 24 -30 2 24 -25.6024 2.2962 24 -25.5434
4 16 3.399 24 -25.0868 4 24 -25.7574 4 24 -30 2.2962 24 -25.5434
4 16 3.399 24 -25.0868 4.2426 24 -24.2426 5.7574 24 -25.7574 4 24 -25.7574
3 16 5.7574 24 -25.7574 4.2426 24 -24.2426 5.0868 24 -23.399
4 16 5.5434 24 -22.2962 7.3912 24 -23.0616 5.7574 24 -25.7574 5.0868 24 -23.399
3 16 7.3912 24 -23.0616 5.5434 24 -22.2962 6 24 -21.1934
4 16 6 24 -20 8 24 -20 7.3912 24 -23.0616 6 24 -21.1934

1 16 0 24 -20 6 0 0 0 -1 0 0 0 -6 3-16tang.dat
1 16 0 12 -20 1 0 0 0 -3 0 0 0 1 1-4stud4.dat
1 16 0 12 -20 8 0 0 0 12 0 0 0 -8 1-16cylo.dat
1 16 0 24 -20 8 0 0 0 -1 0 0 0 -8 1-16chrd.dat
0 BFC INVERTNEXT
1 16 0 16 -20 6 0 0 0 8 0 0 0 -6 3-16cylo.dat
1 16 0 16 -20 6 0 0 0 -1 0 0 0 -6 3-16chrd.dat
1 16 2.1481 20 -25.5729 0 0 -.1481 4 0 0 0 -1 -.0295 rect3.dat
5 24 2.2962 24 -25.5434 2.2962 16 -25.5434 2 24 -25.6024 4.2426 24 -24.2426
5 24 7.3912 24 -23.0616 7.3912 13.0616 -23.0616 8 24 -20 5.7574 24 -25.7574
5 24 5.7574 24 -25.7574 5.7574 20 -25.7574 7.3912 24 -23.0616 4.4566 24 -27.7038
2 24 40 0 -40 40 24 -40
2 24 40 24 -40 0 24 -40
2 24 0 0 -40 40 0 -40
2 24 12 0 -20 0 0 -20
2 24 36 24 -36 5.7574 24 -36
4 16 12 18 -40 6 16 -40 0 16 -40 0 24 -40
4 16 12 18 -40 0 24 -40 40 24 -40 20 18 -40
3 16 28 18 -40 20 18 -40 40 24 -40
4 16 40 0 -40 28 10 -40 28 18 -40 40 24 -40
3 16 28 10 -40 40 0 -40 28 2 -40
4 16 28 2 -40 40 0 -40 0 0 -40 20 2 -40
3 16 20 2 -40 0 0 -40 12 2 -40
4 16 0 0 -40 0 4 -40 6 4 -40 12 2 -40
4 16 12 10 -40 12 2 -40 6 4 -40 6 10 -40
4 16 12 18 -40 12 10 -40 6 10 -40 6 16 -40
4 16 0 0 -40 40 0 -40 28 0 -22 12 0 -22
4 16 0 0 -20 0 0 -40 12 0 -22 12 0 -20
4 16 36 24 -36 40 24 -40 0 24 -40 5.7574 24 -36
2 24 12 8 -20 5.6023 8 -20
4 16 6 4 -20 0 4 -20 0 0 -20 12 0 -20
4 16 6 4 -20 12 0 -20 12 8 -20 6 10 -20
4 16 5.6023 12 -20 6 10 -20 5.6023 8 -20 4 12 -20
4 16 2.5 12.5 -20 4 12 -20 5.6023 8 -20 4 8 -20

0 // bottom antistuds
1 16 0 20 20 0 0 8 0 -8 0 -8 0 0 3-16cyli.dat
1 16 0 12 20 0 0 8 0 1 0 -8 0 0 3-16edge.dat
1 16 0 20 20 0 0 8 0 1 0 8 0 0 5-16edge.dat
2 24 6.7641 12 16 6.7641 20 16
2 24 6.7641 20 16 7.3912 20 16.9384
0 BFC INVERTNEXT
1 16 0 20 20 0 0 6 0 -8 0 -6 0 0 3-16cyli.dat
1 16 0 12 20 0 0 6 0 1 0 -6 0 0 3-16edge.dat
1 16 0 20 20 0 0 6 0 1 0 6 0 0 5-16edge.dat
2 24 4.4047 20 16 4.4047 12 16
2 24 4.4047 20 16 5.5434 20 17.7038

1 16 20 20 20 1 0 0 0 -1 0 0 0 1 stud4a.dat
1 16 20 20 20 0 0 -8 0 -8 0 -8 0 0 3-16cyli.dat
1 16 20 12 20 0 0 -8 0 1 0 -8 0 0 3-16edge.dat
1 16 20 20 20 0 0 -8 0 1 0 8 0 0 5-16edge.dat
2 24 13.2359 12 16 13.2359 20 16
2 24 12.6088 20 16.9384 13.2359 20 16
0 BFC INVERTNEXT
1 16 20 20 20 0 0 -6 0 -8 0 -6 0 0 3-16cyli.dat
1 16 20 12 20 0 0 -6 0 1 0 -6 0 0 3-16edge.dat
1 16 20 20 20 0 0 -6 0 1 0 6 0 0 5-16edge.dat
2 24 15.5953 20 16 15.5953 12 16
2 24 14.4566 20 17.7038 15.5953 20 16
1 16 20 20 20 0 0 8 0 -8 0 -8 0 0 3-16cyli.dat
1 16 20 12 20 0 0 8 0 1 0 -8 0 0 1-16edge.dat
1 16 20 20 20 0 0 8 0 1 0 8 0 0 5-16edge.dat
2 24 23.0616 12 12.6088 24 12 13.2359
2 24 26.7641 12 16 26.7641 20 16
2 24 26.7641 20 16 27.3912 20 16.9384
1 16 20 12 20 5.6568 0 -5.6568 0 -8 0 -5.6568 0 -5.6568 1-16cyli.dat
1 16 20 4 20 5.6568 0 -5.6568 0 1 0 -5.6568 0 -5.6568 1-16edge.dat
1 16 20 12 20 5.6568 0 5.6568 0 -8 0 -5.6568 0 5.6568 1-16cyli.dat
1 16 20 4 20 5.6568 0 5.6568 0 1 0 -5.6568 0 5.6568 1-16edge.dat
2 24 26.7641 12 16 26.7641 4 16
0 BFC INVERTNEXT
1 16 20 20 20 0 0 6 0 -8 0 -6 0 0 3-16cyli.dat
1 16 20 12 20 0 0 6 0 1 0 -6 0 0 3-16edge.dat
1 16 20 20 20 0 0 6 0 1 0 6 0 0 5-16edge.dat
2 24 24.4047 20 16 24.4047 12 16
2 24 24.4047 20 16 25.5434 20 17.7038

1 16 20 12 0 1 0 0 0 -3 0 0 0 1 stud4a.dat
1 16 20 4 0 8 0 0 0 8 0 0 0 8 3-16cyli.dat
1 16 20 4 0 8 0 0 0 1 0 0 0 8 3-16edge.dat
1 16 20 12 0 -8 0 0 0 1 0 0 0 8 5-16edge.dat
2 24 24 4 6.7641 24 12 6.7641
2 24 23.0616 12 7.3912 24 12 6.7641
0 BFC INVERTNEXT
1 16 20 4 0 6 0 0 0 8 0 0 0 6 3-16cyli.dat
1 16 20 4 0 6 0 0 0 1 0 0 0 6 3-16edge.dat
1 16 20 12 0 -6 0 0 0 1 0 0 0 6 5-16edge.dat
2 24 24 12 4.4047 24 4 4.4047
2 24 22.2962 12 5.5434 24 12 4.4047

1 16 20 4 0 8 0 0 0 8 0 0 0 -8 3-16cyli.dat
1 16 20 4 0 8 0 0 0 1 0 0 0 -8 3-16edge.dat
1 16 20 12 0 -8 0 0 0 1 0 0 0 -8 5-16edge.dat
2 24 24 4 -6.7641 24 12 -6.7641
2 24 23.0616 12 -7.3912 24 12 -6.7641
0 BFC INVERTNEXT
1 16 20 4 0 6 0 0 0 8 0 0 0 -6 3-16cyli.dat
1 16 20 4 0 6 0 0 0 1 0 0 0 -6 3-16edge.dat
1 16 20 12 0 -6 0 0 0 1 0 0 0 -6 5-16edge.dat
2 24 24 12 -4.4047 24 4 -4.4047
2 24 22.2962 12 -5.5434 24 12 -4.4047

1 16 20 18 -20 1 0 0 0 -1.5 0 0 0 1 stud4a.dat
1 16 20 18 -20 0 0 8 0 -6 0 -8 0 0 1-4cyls.dat
1 16 20 18 -20 0 0 -8 0 -6 0 -8 0 0 1-4cyls.dat
1 16 20 18 -20 8 0 0 0 -6 0 0 0 8 2-4cyli.dat
1 16 20 12 -20 -8 0 0 0 1 0 0 0 8 5-16edge.dat
1 16 20 4 -20 8 0 0 0 8 0 0 0 8 3-16cyli.dat
1 16 20 4 -20 8 0 0 0 1 0 0 0 8 3-16edge.dat
0 BFC INVERTNEXT
1 16 20 18 -20 0 0 6 0 -2 0 -6 0 0 1-4cyls.dat
0 BFC INVERTNEXT
1 16 20 18 -20 0 0 -6 0 -2 0 -6 0 0 1-4cyls.dat
0 BFC INVERTNEXT
1 16 20 18 -20 6 0 0 0 -2 0 0 0 6 2-4cyli.dat
0 BFC INVERTNEXT
1 16 20 12 -20 0 0 6 0 4 0 6 0 0 3-16cyli.dat
0 BFC INVERTNEXT
1 16 20 12 -20 0 0 -6 0 4 0 6 0 0 3-16cyli.dat
1 16 20 12 -20 0 0 6 0 1 0 6 0 0 3-16edge.dat
1 16 20 12 -20 0 0 -6 0 1 0 6 0 0 3-16edge.dat

2 24 23.4443 18.3151 -27.1354 25.6568 16.8365 -25.6568
2 24 26.3639 16.3639 -24.5988 27.3912 14.8267 -23.0616
2 24 26.3639 16.3639 -24.5988 25.6568 16.8365 -25.6568
2 24 27.3912 14.8267 -23.0616 28 13.9158 -20
2 24 16.5557 18.3151 -27.1354 14.3432 16.8365 -25.6568
2 24 13.6361 16.3639 -24.5988 14.3432 16.8365 -25.6568
2 24 13.6361 16.3639 -24.5988 12.6088 14.8267 -23.0616
2 24 12 13.9158 -20 12.6088 14.8267 -23.0616
2 24 23.4443 18.3151 -27.1354 23.0616 18.3912 -27.3912
2 24 23.0616 18.3912 -27.3912 20 19 -28
2 24 16.9384 18.3912 -27.3912 16.5557 18.3151 -27.1354
2 24 16.9384 18.3912 -27.3912 20 19 -28

2 24 20 19 -26 17.7038 18.5434 -25.5434
2 24 22.2962 18.5434 -25.5434 20 19 -26
2 24 16.5557 18.3151 -24.7761 16.0842 18 -24.461
2 24 17.7038 18.5434 -25.5434 16.5557 18.3151 -24.7761
2 24 23.9158 18 -24.461 23.4443 18.3151 -24.7761
2 24 23.4443 18.3151 -24.7761 22.2962 18.5434 -25.5434
2 24 23.9158 18 -24.461 24.2426 17.7816 -24.2426
2 24 25.5434 16.9122 -22.2962 24.2426 17.7816 -24.2426
2 24 25.5434 16.9122 -22.2962 26 16.6071 -20
2 24 16.0842 18 -24.461 15.7574 17.7816 -24.2426
2 24 14.4566 16.9122 -22.2962 15.7574 17.7816 -24.2426
2 24 14 16.6071 -20 14.4566 16.9122 -22.2962
2 24 14.3976 16.8729 -18 14 16.6071 -20
2 24 26 16.6071 -20 25.6024 16.8729 -18

2 24 12.3977 14.5109 -18 12.3977 12 -18
2 24 27.6024 14.5109 -18 27.6024 10 -18
2 24 28 13.9158 -20 27.6024 14.5109 -18
2 24 12.3977 14.5109 -18 12 13.9158 -20
2 24 14.3976 16 -18 14.3976 16.8729 -18
2 24 25.6024 16 -18 25.6024 16.8729 -18
2 24 23.0616 12 -12.6088 24 12 -13.2359
1 16 14.4271 14 -17.8519 0 -1 -.0295 -2 0 0 0 0 -.1481 rect2a.dat
1 16 25.5729 14 -17.8519 0 1 .0295 -2 0 0 0 0 -.1481 rect2a.dat
5 24 25.5434 16 -17.7038 25.5434 12 -17.7038 25.6024 12 -18 24.2426 12 -15.7574
5 24 14.4566 16 -17.7038 14.4566 12 -17.7038 14.3976 12 -18 15.7574 12 -15.7574

Status:

Needs 2 More Votes (N)

This part has the following automated holds from the Parts Tracker

No path of certified files to a certified or official parent in the parts folder

Current Votes:

None

Official parents and subparts

Part Events:

Rene Rechthaler [Blechtaler]

initially submitted the part.

2026-03-11 11:58:16

origin correct? (centered on the vertical hole)
orientation correct? (pin/axlehole to front)

Creative Commons Attribution License information

Website copyright ©2003-2026 LDraw.org, see Legal Info for details.
LDraw is a completely unofficial, community run free CAD system which represents official parts produced by the LEGO company.
LDraw™ is a trademark owned and licensed by the Estate of James Jessiman
LEGO® is a registered trademark of the LEGO Group, which does not sponsor, endorse, or authorize this site. Visit the official Lego website at http://www.lego.com