Unofficial File parts/u9025.dat
Part Attributes:
File Header:
0 ~Electric 4.5V Battery Box 7 x 11 x 3.333 Lid
0 Name: u9025.dat
0 Author: Michael Heidemann [mikeheide]
0 !LDRAW_ORG Unofficial_Part
0 !LICENSE Licensed under CC BY 4.0 : see CAreadme.txt
0 BFC CERTIFY CCW
0 !HISTORY 2011-07-25 [PTadmin] Official Update 2011-01
0 !HISTORY 2013-03-29 [MagFors] Changed colour 383 to 494 (real metal)
0 !HISTORY 2025-11-06 [MagFors] Raised the internal surface
0 !HISTORY 2025-12-11 [Blechtaler] subfiled
Show contents
1 16 0 0 0 1 0 0 0 1 0 0 0 1 s\560s01.dat
1 16 0 8 0 1 0 0 0 1 0 0 0 1 s\560s02.dat
0 // outside
1 16 -70 10 0 0 1 0 0 0 6 110 0 0 rect3.dat
1 16 70 10 0 0 -1 0 0 0 6 110 0 0 rect3.dat
4 16 -16 14 110 -70 16 110 -70 4 110 -66 0 110
4 16 16 14 110 -16 14 110 -66 0 110 66 0 110
4 16 70 4 110 70 16 110 16 14 110 66 0 110
4 16 48 12 -110 70 16 -110 70 4 -110 66 0 -110
4 16 32 12 -110 48 12 -110 66 0 -110 -66 0 -110
4 16 -66 0 -110 -70 4 -110 -70 16 -110 32 12 -110
0 // side holders
2 24 66 4 -86 62 4 -86
2 24 62 4 -86 62 26 -86
4 16 62 26 -86 66 16 -86 66 4 -86 62 4 -86
4 16 62 24 -68 62 26 -68 62 26 -86 62 4 -86
1 16 64 26 28.5 2 0 0 0 -1 0 0 0 7 rect.dat
0 BFC INVERTNEXT
1 16 62 26 41.5 0 4 0 0 0 -6 6 0 0 3-16cylo.dat
0 BFC INVERTNEXT
1 16 62 26 41.5 0 4 0 0 0 -6 -6 0 0 3-16cylo.dat
1 16 62 26 41.5 0 1 0 0 0 -6 6 0 0 3-16ndis.dat
1 16 62 26 41.5 0 1 0 0 0 -6 -6 0 0 3-16ndis.dat
1 16 66 26 41.5 0 -1 0 0 0 -6 6 0 0 3-16ndis.dat
1 16 66 26 41.5 0 -1 0 0 0 -6 -6 0 0 3-16ndis.dat
1 16 64 20.4272 43.6481 2 0 0 0 -1 -.0294 0 0 -.1481 rect3.dat
1 16 64 20.4272 39.3519 2 0 0 0 -1 -.0294 0 0 .1481 rect3.dat
0 BFC INVERTNEXT
1 16 64 20.3978 41.5 2 0 0 0 -4.3978 0 0 0 2 box3u4p.dat
2 24 62 16 39.5 62 16 43.5
5 24 66 20.4566 43.7962 62 20.4566 43.7962 62 21.7574 45.7426 62 20.3978 43.5
5 24 66 20.4566 39.2038 62 20.4566 39.2038 62 20.3978 39.5 62 21.7574 37.2574
1 16 64 26 54.5 2 0 0 0 -1 0 0 0 7 rect.dat
4 16 66 20.4566 39.2038 66 20.3978 39.5 66 16 39.5 66 20 35.5
3 16 66 20 35.5 66 16 39.5 66 24 21.5
4 16 66 24 21.5 66 26 21.5 66 26 35.5 66 20 35.5
4 16 66 20 47.5 66 16 43.5 66 20.3978 43.5 66 20.4566 43.7962
3 16 66 16 61.5 66 16 43.5 66 20 47.5
4 16 66 16 61.5 66 20 47.5 66 26 47.5 66 26 61.5
3 16 62 26 61.5 66 16 61.5 66 26 61.5
4 16 66 16 61.5 62 26 61.5 62 4 61.5 66 4 61.5
4 16 62 20 47.5 62 4 61.5 62 26 61.5 62 26 47.5
3 16 62 4 61.5 62 20 47.5 62 16 43.5
4 16 62 20 47.5 62 20.4566 43.7962 62 20.3978 43.5 62 16 43.5
4 16 62 4 61.5 62 16 43.5 62 16 39.5 62 4 -86
4 16 62 16 39.5 62 20.3978 39.5 62 20.4566 39.2038 62 20 35.5
4 16 62 24 21.5 62 20 35.5 62 26 35.5 62 26 21.5
4 16 62 24 21.5 62 24 -21 62 16 39.5 62 20 35.5
4 16 62 24 -21 62 24 -39 62 4 -86 62 16 39.5
3 16 62 4 -86 62 24 -39 62 24 -68
2 24 62 4 -86 62 4 61.5
2 24 62 4 61.5 62 26 61.5
2 24 66 16 61.5 66 26 61.5
2 24 -62 4 -86 -62 26 -86
2 24 -62 4 -86 -66 4 -86
4 16 -66 16 -86 -62 26 -86 -62 4 -86 -66 4 -86
4 16 -62 26 -68 -62 24 -68 -62 4 -86 -62 26 -86
1 16 -64 26 28.5 2 0 0 0 -1 0 0 0 7 rect.dat
0 BFC INVERTNEXT
1 16 -62 26 41.5 0 -4 0 0 0 -6 6 0 0 3-16cylo.dat
0 BFC INVERTNEXT
1 16 -62 26 41.5 0 -4 0 0 0 -6 -6 0 0 3-16cylo.dat
1 16 -62 26 41.5 0 -1 0 0 0 -6 6 0 0 3-16ndis.dat
1 16 -62 26 41.5 0 -1 0 0 0 -6 -6 0 0 3-16ndis.dat
1 16 -66 26 41.5 0 1 0 0 0 -6 6 0 0 3-16ndis.dat
1 16 -66 26 41.5 0 1 0 0 0 -6 -6 0 0 3-16ndis.dat
1 16 -64 20.4272 43.6481 2 0 0 0 -1 -.0294 0 0 -.1481 rect3.dat
1 16 -64 20.4272 39.3519 2 0 0 0 -1 -.0294 0 0 .1481 rect3.dat
0 BFC INVERTNEXT
1 16 -64 20.3978 41.5 2 0 0 0 -4.3978 0 0 0 2 box3u4p.dat
2 24 -62 16 39.5 -62 16 43.5
5 24 -66 20.4566 43.7962 -62 20.4566 43.7962 -62 20.3978 43.5 -62 21.7574 45.7426
5 24 -66 20.4566 39.2038 -62 20.4566 39.2038 -62 20.3978 39.5 -62 21.7574 37.2574
1 16 -64 26 54.5 2 0 0 0 -1 0 0 0 7 rect.dat
4 16 -66 16 39.5 -66 20.3978 39.5 -66 20.4566 39.2038 -66 20 35.5
3 16 -66 16 39.5 -66 20 35.5 -66 24 21.5
4 16 -66 26 35.5 -66 26 21.5 -66 24 21.5 -66 20 35.5
4 16 -66 20.3978 43.5 -66 16 43.5 -66 20 47.5 -66 20.4566 43.7962
3 16 -66 16 43.5 -66 16 61.5 -66 20 47.5
4 16 -66 26 47.5 -66 20 47.5 -66 16 61.5 -66 26 61.5
3 16 -66 16 61.5 -62 26 61.5 -66 26 61.5
4 16 -62 4 61.5 -62 26 61.5 -66 16 61.5 -66 4 61.5
4 16 -62 26 61.5 -62 4 61.5 -62 20 47.5 -62 26 47.5
3 16 -62 20 47.5 -62 4 61.5 -62 16 43.5
4 16 -62 20.3978 43.5 -62 20.4566 43.7962 -62 20 47.5 -62 16 43.5
4 16 -62 16 39.5 -62 16 43.5 -62 4 61.5 -62 4 -86
4 16 -62 20.4566 39.2038 -62 20.3978 39.5 -62 16 39.5 -62 20 35.5
4 16 -62 26 35.5 -62 20 35.5 -62 24 21.5 -62 26 21.5
4 16 -62 16 39.5 -62 24 -21 -62 24 21.5 -62 20 35.5
4 16 -62 4 -86 -62 24 -39 -62 24 -21 -62 16 39.5
3 16 -62 24 -39 -62 4 -86 -62 24 -68
2 24 -62 4 -86 -62 4 61.5
2 24 -62 4 61.5 -62 26 61.5
2 24 -66 26 61.5 -66 16 61.5
0 BFC INVERTNEXT
1 16 64 10 77.75 0 2 0 0 0 -6 16.25 0 0 box2-7.dat
0 BFC INVERTNEXT
1 16 -64 10 77.75 0 -2 0 0 0 -6 16.25 0 0 box2-7.dat
2 24 66 16 94 66 16 61.5
2 24 -66 16 61.5 -66 16 94
0 BFC INVERTNEXT
1 16 58 15 98 0 0 4 11 0 0 0 4 0 box2-5.dat
0 BFC INVERTNEXT
1 16 -58 15 98 0 -4 0 11 0 0 0 0 4 box2-5.dat
2 24 54 4 106 54 16 106
4 16 54 4 102 54 4 106 54 16 106 54 26 102
4 16 66 4 94 62 4 94 62 26 94 66 16 94
2 24 -54 4 106 -54 16 106
4 16 -62 4 94 -66 4 94 -66 16 94 -62 26 94
4 16 -54 4 106 -54 4 102 -54 26 102 -54 16 106
0 // inside
4 16 -54 4 106 -16 14 106 16 14 106 54 4 106
4 16 -16 16 106 -16 14 106 -54 4 106 -54 16 106
4 16 16 14 106 16 16 106 54 16 106 54 4 106
1 16 40 14 -106 8 0 0 0 0 -2 0 1 0 recte3.dat
2 24 66 4 -106 -66 4 -106
2 24 32 16 -106 -66 16 -106
2 24 66 16 -106 48 16 -106
4 16 -66 16 -106 -66 4 -106 32 12 -106 32 16 -106
4 16 48 16 -106 48 12 -106 66 4 -106 66 16 -106
4 16 66 4 -106 48 12 -106 32 12 -106 -66 4 -106
4 16 66 4 -106 -66 4 -106 -32 4 -100 32 4 -100
1 16 66 10 -96 0 1 0 6 0 0 0 0 10 rect.dat
1 16 -66 10 -96 0 -1 0 6 0 0 0 0 10 rect.dat
4 16 62 4 -86 66 4 -86 66 4 -106 32 4 -100
4 16 62 4 -86 32 4 -100 32 4 -96 62 4 61.5
4 16 -66 4 -106 -66 4 -86 -62 4 -86 -32 4 -100
4 16 -32 4 -96 -32 4 -100 -62 4 -86 -62 4 61.5
4 16 62 4 61.5 32 4 -96 -32 4 -96 -62 4 61.5
4 16 -62 4 61.5 -62 4 94 62 4 94 62 4 61.5
1 16 58 4 -103 1 0 0 0 8 0 0 0 3 box4-1.dat
1 16 -58 4 -103 1 0 0 0 8 0 0 0 3 box4-1.dat
0 // center
1 16 31 0 8.5 1 0 0 0 1 0 0 0 1 s\u9025s01.dat
1 16 31 0 -71.5 1 0 0 0 1 0 0 0 1 s\u9025s01.dat
1 16 -31 0 8.5 1 0 0 0 1 0 0 0 1 s\u9025s01.dat
1 16 -31 0 -71.5 1 0 0 0 1 0 0 0 1 s\u9025s01.dat
1 16 41.5 0 75 0 0 -1 0 1 0 1 0 0 s\u9025s01.dat
1 16 -41.5 0 75 0 0 1 0 1 0 1 0 0 s\u9025s01.dat
1 16 0 4 36 0 0 10 0 10 0 10 0 0 4-4cylo.dat
1 16 -1 -21.851 -70 0 2 0 29.851 0 0 0 0 -40 48\1-12cylo.dat
1 16 -1 -21.851 -70 0 1 0 29.851 0 0 0 0 -40 48\1-12chrd.dat
1 16 1 -21.851 -70 0 -1 0 29.851 0 0 0 0 -40 48\1-12chrd.dat
1 16 0 4 -80 1 0 0 0 1 0 0 0 -10 recte3.dat
3 16 -1 4 -90 -1 4 -70 -1 8 -70
3 16 1 4 -70 1 4 -90 1 8 -70
1 16 0 4 -35 0 0 1 0 4 0 35 0 0 box3u8p.dat
1 16 -1 -21.851 0 0 2 0 29.851 0 0 0 0 40 48\1-12cylo.dat
1 16 -1 -21.851 0 0 1 0 29.851 0 0 0 0 40 48\1-12chrd.dat
1 16 1 -21.851 0 0 -1 0 29.851 0 0 0 0 40 48\1-12chrd.dat
1 16 0 4 10 1 0 0 0 1 0 0 0 10 recte3.dat
3 16 -1 8 0 -1 4 0 -1 4 20
3 16 1 4 0 1 8 0 1 4 20
Status:
Needs 2 More Votes (F)
This part has the following automated holds from the Parts Tracker
Current Votes:
None
Official parents and subparts
Part Events:
Archived Part Events:
2013-04-04 15:20:05
It is a Need Work-part, and I don't belive the content to be correct.
The thickness of this lid can't possibly be twice as thick as 560.dat.
But if someone could confirm that it is that thick, I'll do it.
The thickness of this lid can't possibly be twice as thick as 560.dat.
But if someone could confirm that it is that thick, I'll do it.
2013-04-04 19:05:04
I have to dig this old thing :)
Not sure about internals. Maybe I just took the other part and corrected the outer hight.
Not sure about internals. Maybe I just took the other part and corrected the outer hight.
2024-12-31 23:46:21
the studs could be replaced with studs (6x6 + 4x4 + 1x5 + 1x5)
and yes, lotsa t-junk
and yes, lotsa t-junk
2025-01-01 15:59:24
Do you have this box? Maybe you can explain the thickness of this lid?
2025-01-05 16:04:36
found the lid, posted a inside pic on Discord
the battery holders are raised in reality
this inside cot copied from the flat one, where they are dented in
the center holder for the (brass) nut has a cyli part
the double tooth at the side has a round cutout
the battery holders are raised in reality
this inside cot copied from the flat one, where they are dented in
the center holder for the (brass) nut has a cyli part
the double tooth at the side has a round cutout
2025-01-05 16:23:49
Don't use Discord.
2025-01-05 16:31:43
but except for creating a new forum post there is no way to post pics here...
2025-01-05 16:47:47
difference is also visible here:
https://www.bricklink.com/v2/catalog/catalogitem.page?P=bb0044b#T=C
https://www.bricklink.com/v2/catalog/catalogitem.page?P=bb0044b#T=C
2025-01-10 20:49:19
should I rework it?
2025-01-13 18:41:44
The real life thickness measured outside (without studs) is 5,5 mm
I have dig out this piece and can hopefully answer any question.
I have dig out this piece and can hopefully answer any question.
2025-01-13 18:49:49
I also have this part dug out and it looks like the inner thickness is the standard 4LDU (measured 3)
outside 6,4mm (16LDU)
inside 5,2mm (13LDU)
through the lever slot: 1,2mm (3LDU)
should the common areas (slot/top) get subfiled?
outside 6,4mm (16LDU)
inside 5,2mm (13LDU)
through the lever slot: 1,2mm (3LDU)
should the common areas (slot/top) get subfiled?
2025-01-14 18:52:47
I do not think that this will make this part better. If there is already a subfile you can use instead some geometrie in this part, you are welcome to update. Without many subparts it will get quicker throw the review for certification.
Based on the image at BL
wrong material for the screw holder, should be brass
and the battery holder pins should be only partial, but hi-res cylo segments
do you need dimensions? (i have both variants of this part)
and the battery holder pins should be only partial, but hi-res cylo segments
do you need dimensions? (i have both variants of this part)
2025-11-27 20:43:06
We don't have a yellow metal colour.
I don't understand your other comment.
I don't understand your other comment.
2025-11-27 21:15:12
as of now, the small battery holders are
1 16 31 12 -72 -10 0 0 0 0 -2 0 4 0 2-4cylo.dat (stretched asymmetrically)
but they should fit the u9199.dat...
for the color: 495 would be a bit closer (still have to check that with other boxes, may have changed in the production)
should parts of the top and bottom get subparted as common for 560.dat?
(both parts are interchangeable and have the same top/bottom structure, just with a different distance)
1 16 31 12 -72 -10 0 0 0 0 -2 0 4 0 2-4cylo.dat (stretched asymmetrically)
but they should fit the u9199.dat...
for the color: 495 would be a bit closer (still have to check that with other boxes, may have changed in the production)
should parts of the top and bottom get subparted as common for 560.dat?
(both parts are interchangeable and have the same top/bottom structure, just with a different distance)
2025-11-29 10:57:25
some more observations:
-the center support blade is flatter and has two rounded ends (try 48\1-16 or 48\1-12cylo for that)
-also try 2x 1-16cylo for the battery holders
-the side support gap in line of the screw holder has a round cutout (could be ignored)
-two small boxes near the lever slot as switch plate holder
-the center support blade is flatter and has two rounded ends (try 48\1-16 or 48\1-12cylo for that)
-also try 2x 1-16cylo for the battery holders
-the side support gap in line of the screw holder has a round cutout (could be ignored)
-two small boxes near the lever slot as switch plate holder
2025-11-29 11:55:43
Since you have knowledge about whats correct please go ahead and edit the file.
subfiled and slightly improved
2025-12-11 11:44:33
Header Edits
description:
~Electric 4.5V Battery Box 7 x 11 x 3.333 Lid0 Name: u9025.dat
to
~Electric 4.5V Battery Box 7 x 11 x 3.333 Lid
And now the bottom inside the screw cone is missing in this thicker version.
2025-12-11 22:00:19
there is some kind of empty room behind the screw socket, the old flat one is flush there, this modern one has normal thickness and some distance to the screw insert...
idk if the brass "nut" insert got moulded in or thermo-riveted in. (could be the reason for the cone)
idk if the brass "nut" insert got moulded in or thermo-riveted in. (could be the reason for the cone)
Hm...
"Something" is missing, but it is hidded deep inside the assembly.
"Something" is missing, but it is hidded deep inside the assembly.
Creative Commons Attribution License information
This part is copyright © Michael Heidemann
Licensed under CC BY 4.0
Edits:
LDraw.org Parts Tracker,
Magnus Forsberg,
Rene Rechthaler,
Contain an overlapping area in quad of line #147
(And many, many t-junctions ;-) )