Unofficial File parts/s/17979s01.dat
Warning: Model breaking changes to unofficial parts may occur anytime prior to release
0 ~Flag 5 x 6 with Thick C-Clip
0 Name: s\17979s01.dat
0 Author: Gabriel Läufer [Dr.Bricktacular]
0 !LDRAW_ORG Unofficial_Subpart
0 !LICENSE Licensed under CC BY 4.0 : see CAreadme.txt
0 BFC CERTIFY CCW
0 !HISTORY 2024-02-23 [Dr.Bricktacular] Subpart dervied from Bertrand Lequy [Berth] part but without side faces
0 !HISTORY 2026-09-14 [MagFors] corrected some condlinesShow file code:
0 // frame
1 16 -2.25 90.75 8.675 0 1 0 1.5 0 0 0 0 1.5 1-4ndis.dat
1 16 2.25 90.75 8.675 0 -1 0 1.5 0 0 0 0 1.5 1-4ndis.dat
0 BFC INVERTNEXT
1 16 2.25 90.75 8.675 0 -4.5 0 1.5 0 0 0 0 1.5 1-4cylo.dat
1 16 2.25 29.25 8.675 0 -1 0 -1.5 0 0 0 0 1.5 1-4ndis.dat
1 16 -2.25 29.25 8.675 0 1 0 -1.5 0 0 0 0 1.5 1-4ndis.dat
0 BFC INVERTNEXT
1 16 -2.25 29.25 8.675 0 4.5 0 -1.5 0 0 0 0 1.5 1-4cylo.dat
4 16 2.25 20 10.175 2.25 0 30 -2.25 0 30 -2.2575 20 10.175
2 24 -2.25 90.75 10.175 -2.25 29.25 10.175
2 24 2.25 29.25 10.175 2.25 90.75 10.175
4 16 2.25 90.75 10.175 2.25 29.25 10.175 -2.25 29.25 10.175 -2.25 90.75 10.175
2 24 2.25 20 10.175 2.25 0 30
2 24 -2.25 100 10.175 2.25 100 10.175
2 24 -2.25 100 10.175 -2.25 120 30
2 24 2.25 100 10.175 2.25 120 30
4 16 -2.25 120 30 2.25 120 30 2.25 100 10.175 -2.25 100 10.175
2 24 -2.25 40 110 -2.25 80 110
2 24 -2.25 80 110 2.25 80 110
2 24 2.25 80 110 2.25 40 110
2 24 2.25 40 110 -2.25 40 110
4 16 2.25 40 110 2.25 80 110 -2.25 80 110 -2.25 40 110
2 24 -2.25 0 30 2.25 0 30
2 24 -2.25 0 30 -2.25 40 110
2 24 2.25 0 30 2.25 40 110
4 16 -2.25 40 110 -2.25 0 30 2.25 0 30 2.25 40 110
2 24 2.25 120 30 -2.25 120 30
2 24 2.25 120 30 2.25 80 110
2 24 -2.25 120 30 -2.25 80 110
4 16 -2.25 120 30 -2.25 80 110 2.25 80 110 2.25 120 30
0 // lines
2 24 2.25 92.25 10.175 2.25 92.25 8.675
2 24 -2.25 92.25 10.175 -2.25 92.25 8.675
2 24 2.25 27.75 10.175 2.25 27.75 8.675
2 24 -2.25 27.75 10.175 -2.25 27.75 8.675
2 24 -2.25 0 30 -2.2575 20 10.175
2 24 -2.2575 20 10.175 2.25 20 10.175
0 // clip
1 16 0 23.875 0 1 0 0 0 1 0 0 0 1 clip13.dat
1 16 0 96.125 0 1 0 0 0 1 0 0 0 1 clip13.dat
2 24 -3.088 27.75 7.808 -2.25 27.75 10.175
2 24 -3.088 20 7.808 -2.2575 20 10.175
2 24 2.25 27.75 10.175 3.088 27.75 7.808
2 24 2.25 20 10.175 3.088 20 7.808
2 24 -4.94 19.938 6.222 -6.3256 19.875 4.1965
2 24 -3.088 20 7.808 -4.94 19.938 6.222
2 24 -4.94 27.813 6.222 -6.3256 27.875 4.1965
2 24 -3.088 27.75 7.808 -4.94 27.813 6.222
2 24 4.94 19.938 6.222 6.3256 19.875 4.1965
2 24 3.088 20 7.808 4.94 19.938 6.222
2 24 4.94 27.813 6.222 6.3256 27.875 4.1965
2 24 3.088 27.75 7.808 4.94 27.813 6.222
4 16 2.25 20 10.175 -2.2575 20 10.175 -3.088 20 7.808 3.088 20 7.808
4 16 2.25 20 10.175 3.088 20 7.808 3.088 27.75 7.808 2.25 27.75 10.175
4 16 -3.088 27.75 7.808 -3.088 20 7.808 -2.2575 20 10.175 -2.25 27.75 10.175
4 16 3.088 27.75 7.808 3.088 20 7.808 4.94 19.938 6.222 4.94 27.813 6.222
4 16 4.94 27.813 6.222 4.94 19.938 6.222 6.3256 19.875 4.1965 6.3256 27.875 4.1965
4 16 -3.088 27.75 7.808 -4.94 27.813 6.222 -4.94 19.938 6.222 -3.088 20 7.808
4 16 -6.3256 19.875 4.1965 -4.94 19.938 6.222 -4.94 27.813 6.222 -6.3256 27.875 4.1965
4 16 3.088 20 7.808 -3.088 20 7.808 -4.94 19.938 6.222 4.94 19.938 6.222
4 16 4.94 19.938 6.222 -4.94 19.938 6.222 -6.3256 19.875 4.1965 6.3256 19.875 4.1965
3 16 -2.25 27.75 10.175 -2.25 27.75 8.675 -3.088 27.75 7.808
3 16 2.25 27.75 8.675 2.25 27.75 10.175 3.088 27.75 7.808
4 16 -2.25 27.75 8.675 2.25 27.75 8.675 3.088 27.75 7.808 -3.088 27.75 7.808
4 16 -4.94 27.813 6.222 -3.088 27.75 7.808 3.088 27.75 7.808 4.94 27.813 6.222
4 16 -4.94 27.813 6.222 4.94 27.813 6.222 6.3256 27.875 4.1965 -6.3256 27.875 4.1965
5 24 3.088 20 7.808 3.088 27.75 7.808 4.94 19.938 6.222 2.25 20 10.175
5 24 4.94 19.938 6.222 4.94 27.813 6.222 3.088 20 7.808 6.3256 19.875 4.1965
5 24 6.3256 19.875 4.1965 6.3256 27.875 4.1965 7.4612 19.875 1.5372 4.94 19.938 6.222
5 24 -3.088 20 7.808 -3.088 27.75 7.808 -2.2575 20 10.175 -4.94 19.938 6.222
5 24 -4.94 19.938 6.222 -4.94 27.813 6.222 -3.088 20 7.808 -6.3256 19.875 4.1965
5 24 -6.3256 19.875 4.1965 -6.3256 27.875 4.1965 -4.94 19.938 6.222 -7.4612 19.875 1.5372
2 24 -3.088 100 7.808 -2.25 100 10.175
2 24 -3.088 92.25 7.808 -2.25 92.25 10.175
2 24 2.25 100 10.175 3.088 100 7.808
2 24 2.25 92.25 10.175 3.088 92.25 7.808
2 24 -4.94 92.188 6.222 -6.3256 92.125 4.1965
2 24 -3.088 92.25 7.808 -4.94 92.188 6.222
2 24 -4.94 100.063 6.222 -6.3256 100.125 4.1965
2 24 -3.088 100 7.808 -4.94 100.063 6.222
2 24 4.94 92.188 6.222 6.3256 92.125 4.1965
2 24 3.088 92.25 7.808 4.94 92.188 6.222
2 24 4.94 100.063 6.222 6.3256 100.125 4.1965
2 24 3.088 100 7.808 4.94 100.063 6.222
4 16 2.25 92.25 10.175 3.088 92.25 7.808 3.088 100 7.808 2.25 100 10.175
4 16 -3.088 100 7.808 -3.088 92.25 7.808 -2.25 92.25 10.175 -2.25 100 10.175
4 16 3.088 100 7.808 3.088 92.25 7.808 4.94 92.188 6.222 4.94 100.063 6.222
4 16 4.94 100.063 6.222 4.94 92.188 6.222 6.3256 92.125 4.1965 6.3256 100.125 4.1965
4 16 -3.088 100 7.808 -4.94 100.063 6.222 -4.94 92.188 6.222 -3.088 92.25 7.808
4 16 -6.3256 92.125 4.1965 -4.94 92.188 6.222 -4.94 100.063 6.222 -6.3256 100.125 4.1965
4 16 3.088 92.25 7.808 -3.088 92.25 7.808 -4.94 92.188 6.222 4.94 92.188 6.222
4 16 4.94 92.188 6.222 -4.94 92.188 6.222 -6.3256 92.125 4.1965 6.3256 92.125 4.1965
4 16 -4.94 100.063 6.222 -3.088 100 7.808 3.088 100 7.808 4.94 100.063 6.222
4 16 -4.94 100.063 6.222 4.94 100.063 6.222 6.3256 100.125 4.1965 -6.3256 100.125 4.1965
4 16 3.088 100 7.808 -3.088 100 7.808 -2.25 100 10.175 2.25 100 10.175
4 16 2.25 92.25 8.675 -2.25 92.25 8.675 -3.088 92.25 7.808 3.088 92.25 7.808
3 16 -2.25 92.25 8.675 -2.25 92.25 10.175 -3.088 92.25 7.808
3 16 2.25 92.25 10.175 2.25 92.25 8.675 3.088 92.25 7.808
5 24 -3.088 92.25 7.808 -3.088 100 7.808 -2.25 92.25 10.175 -4.94 92.188 6.222
5 24 -4.94 92.188 6.222 -4.94 100.063 6.222 -3.088 92.25 7.808 -6.3256 92.125 4.1965
5 24 -6.3256 92.125 4.1965 -6.3256 100.125 4.1965 -4.94 92.188 6.222 -7.4612 92.125 1.5372
5 24 3.088 92.25 7.808 3.088 100 7.808 2.25 92.25 10.175 4.94 92.188 6.222
5 24 4.94 92.188 6.222 4.94 100.063 6.222 3.088 92.25 7.808 6.3256 92.125 4.1965
5 24 6.3256 92.125 4.1965 6.3256 100.125 4.1965 4.94 92.188 6.222 7.4612 92.125 1.5372
5 24 2.25 20 10.175 2.25 27.75 10.175 3.088 20 7.808 2.25 0 30
5 24 -2.2575 20 10.175 -2.25 27.75 10.175 -3.088 20 7.808 -2.25 0 30
5 24 -2.25 100 10.175 -2.25 92.25 10.175 -3.088 100 7.808 -2.25 120 30
5 24 2.25 100 10.175 2.25 92.25 10.175 3.088 100 7.808 2.25 120 30Status
Needs 2 More Votes (N)
Current Votes:
No recorded votesThis part has the following automated holds from the Parts Tracker
- No path of certified files to a certified or official parent in the parts folder
Part Dependencies
Official parents and subparts
Part Events
Gabriel Läufer [Dr.Bricktacular]
initially submitted the part.
2025-02-08 20:25:33
Header edits.
Rene Rechthaler [Blechtaler]
made the following comment.
2025-02-08 21:04:09
should be used in the unpatterned version too
Gabriel Läufer [Dr.Bricktacular]
made the following comment.
2025-02-09 17:50:26
Before I’ve submitted the part I‘ve of course thought about to subfile it. Since the base file was offical I’ve decided against. Can I edit the offical file? Just using the offical file fix switch? Do I’ve to ask someone before?
Rene Rechthaler [Blechtaler]
made the following comment.
2025-02-09 18:00:32
yes, you can edit it.
add a !HISTORY line with your tag and what you did (used subfile), change the Parttype to unofficial and edit the part.
then flip the offical file fix switch.
original part is CC 4.0, which can be edited easier.
add a !HISTORY line with your tag and what you did (used subfile), change the Parttype to unofficial and edit the part.
then flip the offical file fix switch.
original part is CC 4.0, which can be edited easier.
Gerald Lasser [GeraldLasser]
edited the part header.
2025-02-09 20:45:42
Header Edits
history:
to
0 !HISTORY 2025-02-09 [Dr.Bricktacular] Subfiled Part
added subfiling info
Gerald Lasser [GeraldLasser]
posted a vote of Certify
2025-02-09 20:45:47
Rene Rechthaler [Blechtaler]
posted a vote of Certify
2025-02-09 21:06:48
could be edited into
without Front and Back Surface
without Front and Back Surface
Chris Böhnke [KnightOfTarenta]
made the following comment.
2025-02-09 21:34:51
Umm... There is an issue with this part:
https://library.ldraw.org/parts/43470
Whilst it probably doesn't hurt to have this, a printed version of this specific variant does not exist (and it's discontinued).
https://library.ldraw.org/parts/43470
Whilst it probably doesn't hurt to have this, a printed version of this specific variant does not exist (and it's discontinued).
Magnus Forsberg [MagFors]
renamed the part.
2025-02-11 22:02:17
"parts/s/51000s01.dat" to "parts/s/17979s01.dat"
Magnus Forsberg [MagFors]
posted a vote of Hold
2025-02-11 22:03:30
Content is wrong, and should be replaced by a subfile made from 17979.
Gabriel Läufer [Dr.Bricktacular]
submitted a new version of the part (all votes reset).
2025-02-23 20:23:09
Content corrected. Subfile derived from 17979.
Peter Blomberg [WUIt]
posted a vote of Hold
2025-11-21 08:41:39
There are rounding issues adjoining the clips. Additionally, the custom extensions of the clips seems to need cond lines, which are currently missing.
Magnus Forsberg [MagFors]
submitted a new version of the part (all votes reset).
2026-09-14 18:24:47